Owner's Manual
IPS LED MONITOR (LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating your set and retain it for future reference.
IPS LED MONITOR MODEL
24MP66HQ
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
3 |
LICENSE |
23 |
TROUBLESHOOTING |
|
|
|
|
|
|
4 |
|
25 |
24MP66HQ |
|
ASSEMBLING AND PREPAR- |
26 |
Preset Modes (Resolution) |
||
|
ING |
26 |
Indicator |
|
4 |
Unpacking |
|
27 |
PROPER POSTURE |
5 |
Parts and buttons |
|||
6 |
Moving and Lifting the Monitor |
27 |
Proper posture for using the Monitor set. |
7Setting up the Monitor set
7- Attaching the Stand Base
7- Detaching the Stand Base 8 - Mounting on a table
8 - Using the cable holder
10 - Mounting on a wall
11 USING THE MONITOR SET
11Connecting to a PC
11- D-SUB connection
11- HDMI connection
12Connecting to AV Devices
12- HDMI connection
12Connecting to External Devices
12- Peripheral device connection
13CUSTOMIZING SETTINGS
14Customizing Settings
14- Menu Settings
15-Picture
16-Color
17-Display
17-Audio
18-Others
19READER Setting
20FUNC. Setting
20-SMART ENERGY SAVING
21-Picture Mode
22-Color Weakness
LICENSE 3
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:
*This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
*To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 ASSEMBLING AND PREPARING
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
CD(Owner's Manual) / |
D-SUB Cable |
|
(This cable is not included in all |
||
Card |
||
countries.) |
||
|
Power Cord |
AC-DC Adapter |
( Depending on the country )
HDMI Cable
(This cable is not included in all countries.)
or
AC-DC Adapter
( Depending on the country )
Stand Body |
Stand Base |
CAUTION
yyDo not use any unapproved accessories to ensure the safety and product life span.
yyAny damages or injuries by using unapproved accessories are not covered by the warranty.
NOTE
yyThe accessories supplied with your product may vary depending on the model.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
ASSEMBLING AND PREPARING 5
<![endif]>ENGLISH
Power Indicator yyLightingOn:Turnedon yyLightingOff: Turned off
(Power Button)
Button (See p.13)
DC-IN |
HDMI IN |
H/P |
D-SUB IN |
19 |
Connection panel (See p.11 ~12)
<![endif]>ENGLISH
6 ASSEMBLING AND PREPARING
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size.
yyIt is advisable to place the monitor in the original box or packing material before attempting to move it.
yyBefore moving or lifting the monitor, disconnect the power cord and all cables.
yyHold the top and bottom of the monitor frame firmly. Do not hold the panel itself.
yyWhen holding the monitor, the screen should face away from you to prevent it being scratched.
yyWhen moving the monitor, avoid any strong shock or vibrations to the product.
yyWhen moving the monitor, keep it upright, never turn the monitor on its side or tilt it sideways.
CAUTION
yyAs far as possible, avoid touching the monitor screen. This may result in damage to the screen or some of the pixels used to create images.
ASSEMBLING AND PREPARING 7
1Place the Monitor set with the screen side down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
21 Attach the Stand Body to the monitor set.
2 Attach the Stand Base to Stand Body.
3 Tighten the screw to the right.
1Place the Monitor set with the screen side down on a flat and cushioned surface.
21 Pull out the Stand Body and Stand Base from the monitor set.
2 Turn the screw to the left.
3 Pull out the Stand Base.
Stand Body
Stand Body
Stand Base
Stand Base
<![endif]>ENGLISH
<![endif]>ENGLISH
8 ASSEMBLING AND PREPARING
1Lift and tilt the Monitor set into its upright position on a table.
Leave a 10 cm (minimum) space from the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
3Press (Power) button on the bottom switch panel to turn the power on.
CAUTION
Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
2 Connect the AC-DC Adapter and Power Cord
to a wall outlet.
DC-IN
19
Cable holder
or
DC-IN
19
|
|
ASSEMBLING AND PREPARING 9 |
||
WARNING |
|
|
||
|
Using the Kensington security system |
|
When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.
Do not touch or press the screen when adjusting the angle of the monitor.
The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the Monitor set and a table.
NOTE
The Kensington security system is optional. Do not hold this set like below picture.Monitor You can obtain it from most electronics stores. screen can detach from stand base and injure
your body.
NOTE
+20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.
<![endif]>ENGLISH
Front Rear