OWNER'S MANUAL
LED LCD Monitor
(LED Monitor*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating your set and retain it for future reference.
LED LCD MONITOR MODEL
24M49
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
3 |
LICENSE |
23 |
SPECIFICATIONS |
|
|
|
|
|
|
4 |
|
24 |
Preset Modes (Resolution) |
|
ASSEMBLING AND PREPAR- |
24 |
Indicator |
||
|
ING |
|
|
|
4Unpacking
5Supported Drivers and Software
6Parts and buttons
6- How to Use the Joystick Button
7Moving and Lifting the Monitor
8Setting up the Monitor set
8- Attaching the Stand Base
8- Detaching the Stand Base
9- Mounting on a table
10- Using the cable holder
12- Mounting on a wall
13USING THE MONITOR SET
13Connecting to a PC
13- D-SUB connection
13- DVI-D connection
13- HDMI connection
14Connecting to AV Devices
14- HDMI connection
15Connecting to External Devices
15- Peripheral device connection
16CUSTOMIZING SETTINGS
21 TROUBLESHOOTING
LICENSE 3
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:
*This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
*To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 ASSEMBLING AND PREPARING
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
CD(Owner's Manual) / Card |
D-SUB Cable |
HDMI Cable |
( Depending on the country ) |
( Depending on the country ) |
( Depending on the country ) |
|
|
or |
Power Cord |
AC-DC Adapter |
|
( Depending on the country ) |
AC-DC Adapter |
|
|
|
( Depending on the country ) |
Stand Body |
Stand Base |
Cable Holder |
DVI-D Cable |
( Depending on the country ) |
ASSEMBLING AND PREPARING 5
CAUTION
yyDo not use any unapproved accessories to ensure the safety and product life span.
yyAny damages or injuries by using unapproved accessories are not covered by the warranty.
NOTE
yyThe accessories supplied with your product may vary depending on the model.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
<![endif]>ENGLISH
You can download and install the latest version from the LGE website (www.lg.com).
Drivers and Software |
Installation Priority |
24M49 |
Monitor Driver |
Recommended |
O |
OnScreen Control |
Recommended |
O |
6 ASSEMBLING AND PREPARING
<![endif]>ENGLISH
Power Indicator yyOn: power is on yyOff: power is off
(Joystick Button)
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.
Basic Functions
|
|
|
|
|
|
|
Power on |
Press the joystick button once with your finger to turn on the |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
monitor. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power off |
Press and hold the joystick button once with your finger to turn off |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
the monitor. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
◄/► |
Volume |
You can control the volume by moving the joystick button left/right. |
|
|
|
|
|
|
|||
|
|
|
|
|
|
Control |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE
yyThe joystick button is located at the bottom of the monitor.
|
ASSEMBLING AND PREPARING 7 |
|
|
|
|
Moving and Lifting the Monitor |
yyWhen holding the monitor, the screen should |
|
|
||
When moving or lifting the monitor, follow these |
face away from you to prevent it being |
|
instructions to prevent the monitor from being |
scratched. |
|
scratched or damaged and to ensure safe trans- |
|
|
portation regardless of its shape or size. |
|
|
yyIt is advisable to place the monitor in the |
|
|
original box or packing material before at- |
|
|
tempting to move it. |
|
|
yyBefore moving or lifting the monitor, discon- |
|
|
nect the power cord and all cables. |
|
|
yyHold the top and bottom of the monitor frame |
yyWhen moving the monitor, avoid any strong |
|
firmly. Do not hold the panel itself. |
shock or vibrations to the product. |
|
|
yyWhen moving the monitor, keep it upright, |
|
|
never turn the monitor on its side or tilt it |
|
|
sideways. |
CAUTION
yyAs far as possible, avoid touching the monitor screen. This may result in damage to the screen or some of the pixels used to create images.
<![endif]>ENGLISH
<![endif]>ENGLISH
8 ASSEMBLING AND PREPARING
1Place the Monitor set with the screen side down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
21 Insert the Cable Holder.
2 Attach the Stand Body to the monitor set.
3 Attach the Stand Base to Stand Body.
4 Tighten the screw to the right.
Stand Body
3
Stand Base |
4 |
1Place the Monitor set with the screen side down on a flat and cushioned surface.
21 Turn the screw to the left.
2 Pull out the Stand Base.
3 Pull out the Stand Body from the monitor set.
4 Separate the Cable Holder.
Stand Body
Stand Base
1
Stand Body
2
Stand Base
3
4