Owner's Manual
LED LCD MONITOR (LED MONITOR*)
*LG LED Monitors are LCD Monitors with LED Backlighting.
Please read this manual carefully before operating your set and retain it for future reference.
LED LCD MONITOR MODEL
22M47D |
23M47D |
24M47D |
22M47VQ |
23M47VQ |
24M47VQ |
22M47H |
23M47H |
24M47H |
22M47HQ |
|
24M47HQ |
www.lg.com
<![endif]>ENGLISH
2 TABLE OF CONTENTS
3 |
LICENSE |
21 |
- -Picture |
||
23 |
- -General |
||||
|
|
||||
4 |
ASSEMBLING AND PREPAR- |
24 |
- -Auto Configuration |
||
25 |
- -Reset |
||||
|
ING |
26 |
- -Picture mode |
||
4 |
Unpacking |
|
27 TROUBLESHOOTING |
||
6 |
Parts and buttons |
|
|||
7 |
- How to Use the Joystick Button |
|
|
|
|
8 |
Moving and Lifting the Monitor |
|
29 SPECIFICATIONS |
||
9 |
Setting up the Monitor set |
|
|||
9 |
- Attaching the Stand Base |
35 |
Preset Modes (Resolution) |
||
9 |
- Detaching the Stand Base |
35 |
Indicator |
||
10 - Mounting on a table |
|
|
|
||
10 - Using the cable holder |
|
36 PROPER POSTURE |
|||
12 - Mounting on a wall |
|
||||
36 |
Proper posture for using the Monitor set. |
||||
|
|
13 USING THE MONITOR SET
13Connecting to a PC
13- D-SUB connection
13- DVI-D connection
13- HDMI connection
14Connecting to AV Devices
14- HDMI connection
15Connecting to External Devices
15- Peripheral device connection
16INSTALLING THE LG MONI-
TOR SOFTWARE
16 Installing The Screen Split
18 CUSTOMIZING SETTINGS
18Activating the Main Menu
18- Main Menu Features
19Customizing settings
19 - Menu Settings
19 - -Quick Settings
LICENSE 3
22M47VQ 22M47H 22M47HQ 23M47VQ 23M47H 24M47H 24M47HQ 24M47VQ
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:
*This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.
*To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.
<![endif]>ENGLISH
<![endif]>ENGLISH
4 ASSEMBLING AND PREPARING
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.
CD(Owner's Manual) / |
D-SUB Cable |
|
DVI-D Cable |
||||
( This cable is not included in all |
|
|
|
|
|
|
|
Card |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
countries. ) |
|
|
|
|
|
|
|
|
( |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
This cable |
is not included in all |
||||
|
|
|
|
countries. ) |
|
|
or |
Power Cord |
AC-DC Adapter |
|
( Depending on the country ) |
AC-DC Adapter |
|
|
|
( Depending on the country ) |
Stand Body |
Stand Base |
HDMI Cable |
( This cable is not included in all |
||
|
|
countries. ) |
ASSEMBLING AND PREPARING 5
CAUTION
yyDo not use any unapproved accessories to ensure the safety and product life span.
yyAny damages or injuries by using unapproved accessories are not covered by the warranty.
NOTE
yyThe accessories supplied with your product may vary depending on the model.
yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
<![endif]>ENGLISH
6 ASSEMBLING AND PREPARING
<![endif]>ENGLISH
Power Indicator yyOn: power is on yyOff: power is off
(Joystick Button)
Connection panel (See p.13~15)
NOTE
yyThe joystick button is located at the bottom of the monitor.
ASSEMBLING AND PREPARING 7
You can easily control the functions of the monitor by pressing the joystick button or moving it left/right with your finger.
Basic Functions
|
|
|
|
|
|
|
Power on |
Press the joystick button once with your finger to turn on the |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
monitor. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power off |
Press and hold the joystick button once with your finger to turn off |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
the monitor. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
◄/► |
Volume |
You can control the volume by moving the joystick button left/right. |
|
|
|
|
|
|
|||
|
|
|
|
|
|
Control |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<![endif]>ENGLISH
<![endif]>ENGLISH
8 ASSEMBLING AND PREPARING
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size.
yyIt is advisable to place the monitor in the original box or packing material before attempting to move it.
yyBefore moving or lifting the monitor, disconnect the power cord and all cables.
yyHold the top and bottom of the monitor frame firmly. Do not hold the panel itself.
yyWhen holding the monitor, the screen should face away from you to prevent it being scratched.
yyWhen moving the monitor, avoid any strong shock or vibrations to the product.
yyWhen moving the monitor, keep it upright, never turn the monitor on its side or tilt it sideways.
CAUTION
yyAs far as possible, avoid touching the monitor screen. This may result in damage to the screen or some of the pixels used to create images.
ASSEMBLING AND PREPARING 9
1Place the Monitor set with the screen side down on a flat and cushioned surface.
CAUTION
Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.
21 Attach the Stand Body to the monitor set.
2 Attach the Stand Base to Stand Body.
3 Tighten the screw to the right.
Stand Body
Stand Base
1Place the Monitor set with the screen side down on a flat and cushioned surface.
21 Pull out the Stand Body and Stand Base from the monitor set.
2Turn the screw to the left.
3Pull out the Stand Base.
Stand Body
Stand Base
Stand Body
Stand Base
CAUTION
yyIllustrations in this document represent typical procedures, so they may look different from the actual product.
yyDo not carry the monitor upside down by just holding the stand base. This may cause the monitor to fall off the stand and could result in personal injury. yyWhen lifting or moving the monitor, do not touch the monitor screen. The force applied to the moni-
tor screen may cause damage to it.
yyIf you use the monitor panel without the stand base, its joystick button may cause the moni-tor to become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick button to malfunction.
<![endif]>ENGLISH
<![endif]>ENGLISH
10 ASSEMBLING AND PREPARING
1Lift and tilt the Monitor set into its upright position on a table.
Leave a 100 mm (3.94 inches) (minimum) space from the wall for proper ventilation.
100 mm |
100 mm |
(3.94 inches) |
|
|
(3.94 inches) |
100 mm |
|
(3.94 inches) |
100 mm |
|
|
|
(3.94 inches) |
3Press the joystick button on the bottom of the monitor to turn on the monitor.
CAUTION
Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.
2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
Cable holder
or
|
ASSEMBLING AND PREPARING 11 |
|||||
WARNING |
NOTE |
|
||||
When you adjust the angle, do not hold the |
Tilt from +20 to -5 degrees up or down to adjust |
|||||
the angle of the Monitor set to suit your view. |
||||||
bottom of the Monitor set frame as shown on |
||||||
the following illustration, as may injure your |
|
|
|
|
|
|
fingers. |
|
|
|
|
|
|
|
|
|
|
|
|
<![endif]>ENGLISH
When adjusting the angle, may cause damage or abnormality over excessive force.
Do not touch or press the screen when adjusting the angle of the monitor.
Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.
Front |
Rear |
Using the Kensington security system
The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.
Connect the Kensington security system cable between the Monitor set and a table.
NOTE
The Kensington security system is optional. You can obtain it from most electronics stores.
<![endif]>ENGLISH
12 ASSEMBLING AND PREPARING
For proper ventilation, allow a clearance of 100 mm (3.94 inches) on each side and from the wall. Detailed instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
|
100 mm |
|
(3.94 inches) |
100 mm |
|
(3.94 inches) |
100 mm |
|
(3.94 inches) |
|
100 mm |
|
(3.94 inches) |
If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.
When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.
1If you use screw longer than standard, the monitor might be damaged internally.
2If you use improper screw, the product might be damaged and drop from mounted position.
In this case, LG Electronics is not responsible for it.
Model |
22M47D |
23M47D |
24M47D |
|
22M47VQ |
23M47VQ |
24M47VQ |
|
22M47H |
23M47H |
24M47H |
|
22M47HQ |
|
24M47HQ |
Wall Mount |
|
75 x 75 |
|
(A x B) |
|
|
|
Standard |
|
M4 x L10 |
|
screw |
|
||
|
|
|
|
Number of |
|
4 |
|
screws |
|
|
|
|
|
|
|
Wall Mount |
|
LSW 149 |
|
Plate |
|
|
|
(Optional) |
|
|
|
yyVESA (A x B)
A |
B |
|
CAUTION
yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.
yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.
yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel.
yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.
yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper
accessory are not covered by the warranty. yyScrew length from outer surface of back
cover should be under 8mm. Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
Max.8mm
NOTE
yyUse the screws that are listed on the VESA standard screw specifications.
yyThe wall mount kit will include an installation manual and necessary parts.
yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.
yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.
yyFor more information, refer to the instructions supplied with the wall mount.