LG 23ET83, 23ET83V-W User Manual

ENGLISH

OWNER’S MANUAL

LED MONITOR

(LED TOUCH MONITOR)

Please read this manual carefully before operating your set and retain it for future reference.

LED MONITOR(LED TOUCH MONITOR) MODEL LIST

23ET83V

www.lg.com

ENGLISH

2 TABLE OF CONTENTS

CONTENTS

	3	LICENSE	20		TROUBLESHOOTING
	4	ASSEMBLING AND PREPAR-
			23		SPECIFICATIONS
		ING
	4	Unpacking	24		Preset Modes (Resolution)
	5	Parts and buttons	24		HDMI TIMING
	6	Moving and Lifting the Monitor	24		Indicator
	6	Setting up the Monitor	25
	6	- Mounting on a table			PROPER POSTURE
	8	- Tidying cables
			25		Proper Posture for Using the Monitor
	9	USING THE MONITOR

9 Connecting to a PC

9 - D-SUB connection

9 - HDMI connection

11- USB cable-PC connection

11- Headphone port connection

12CUSTOMIZING SETTINGS

13Customizing Settings

13- Menu Settings

14-PICTURE

15-COLOR

16-DISPLAY

16-VOLUME

17-OTHERS

18SUPER ENERGY SAVING

19Picture Mode

LICENSE 3

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ENGLISH

ENGLISH

4 ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

	D-SUB Cable	A-B Type USB 2.0 Cable
CD(Owner's Manual) /	(This cable is not included in
Card	all countries.)

	or
Power Cord	AC-DC Adapter

( Depending on the country )		AC-DC Adapter
		( Depending on the country )

Cable Tie

CAUTION

yyDo not use any unapproved accessories to ensure the safety and product life span.

yyAny damages or injuries by using unapproved accessories are not covered by the warranty.

NOTE

yyThe accessories supplied with your product may vary depending on the model.

yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

ASSEMBLING AND PREPARING 5

Parts and buttons

ENGLISH

Power Indicator

yyLighting On: Turned on (Red) yyLighting Off: Turned off

(Power Button)

SES MODE

Button

H/P

USB UP

HDMI 2

DC-IN (19 V		)	HDMI 1	D-SUB IN

Connection panel

ENGLISH

6 ASSEMBLING AND PREPARING

Moving and Lifting the Monitor

When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or damaged and to ensure safe transportation regardless of its shape or size.

CAUTION

yyAs much as possible, avoid touching the monitor screen. This may result in damage to the screen or some of the pixels used to create images.

yyIt is advisable to place the monitor in the original box or packing material before attempting to move it.

yyBefore moving or lifting the monitor, disconnect the power cord and all cables.

yyHold the top and bottom of the monitor frame firmly. Do not hold the panel itself.

Setting up the Monitor

Mounting on a table

1Lift and tilt the Monitor set into its upright position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

10 cm

10 cm

10 cm

yyWhen holding the monitor, the screen should face away from you to prevent it being scratched.

2Connect the AC-DC Adapter and Power Cord to a wall outlet.

DC-IN (19 V )

or

yyWhen moving the monitor, avoid any strong shock or vibrations to the product.

yyWhen moving the monitor, keep it upright, never turn the monitor on its side or tilt it sideways.

DC-IN (19 V )

ASSEMBLING AND PREPARING 7

3Press the (Power) button on the front panel to turn the power on.

CAUTION

Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.

NOTE

25

WARNING

To avoid injury to the fingers when adjusting the screen, do not hold the upper part of the stand as shown below.

Do not touch or press the screen when adjusting the angle of the monitor.

Front Rear

yyTilt from +25 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

yyAvoid using the product in a high temperature and high humidity area. Moving the monitor from a environment like this to an air conditioned area may cause moisture formation inside the glass. This moisture will be dissipate over time, which may vary depending on the operating environment.

Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.

ENGLISH

ENGLISH

8 USING THE MONITOR

Tidying cables

Using the Kensington security system

Gather and bind the cables with the supplied cable tie.

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the Monitor set and a

NOTE

The Kensington security system is optional. You can obtain it from most electronics stores.