Order Number : GETEC-C1-09-260 FCC Class B CertificationTest Report Number : GETEC-E3-09-154 Page 1 / 1
APPENDIX G
: USER’S MANUAL
EUT Type: LED LCD TV/Monitor
FCC ID.: BEJ22LE5300UE
LED LCD TV
OWNER’S MANUAL
LED LCD TV MODELS
19LE5300
22LE5300
26LE5300
32LE5300
37LE5300
42LE5300
47LE5300
55LE5300
42LE7300
47LE7300
55LE7300
LCD TV
OWNER’S MANUAL
LCD TV MODELS
32LD320
32LD420
42LD420
47LD420
32LD450
37LD450
42LD450
47LD450
32LD520
42LD520
47LD520
55LD520
42LD630
47LD630
55LD630
For 29/22/26/32/37/42/47/55LE5300,
42/47/55LE7300
This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting.
Changing the factory default settings or enabling
other features may increase power consumption that
could exceed the limits necessary to quality for
ENERGY STAR.
Please read this manual carefully before operating
your set and retain it for future reference.
The model and serial number of the TV is located
on the back and one side of the TV.
Record it below should you ever need service.
Model:
Serial:
1-800-243-0000
1-888-865-3026
1-888-542-2623
LG Customer Information Center
P/NO : SAC34134204 (0911-REV00)
USA, Consumer User
USA, Commercial User
CANADA
www.lge.com
WARNING / CAUTION
WARNING / CAUTION
To prevent fire or shock hazards, do not expose
this product to rain or moisture.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equi-
lateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING/CAUTION
TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the
point of the cable entry as practical.
FCC Notice
Class B digital device
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two conditions: (1) This device may not cause (harmful)
interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation (of the
device).
Any changes or modifications in construction of
this device which are not expressly approved by
the party responsible for compliance could void
the user’s authority to operate the equipment.
CAUTION
Do not attempt to modify this product in any
way without written authorization from LG
Electronics. Unauthorized modification could
void the user’s authority to operate this product.
2
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
1
Clean only with dry cloth.
2
Do not block any ventilation openings. Install in
3
accordance with the ma nufacturer’s instructions.
Protect the power cord from being walked
6
on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
Only use attachments/accessories speci-
7
fied by the manufacturer.
Use only with the cart, stand, tripod, bracket,
8
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
Do not install near any heat sources such as
4
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized
5
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong, The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Unplug this apparatus during lighting
9
storms or when unused for long periods
of time.
Refer all servicing to qualified service per-
10
sonnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been
dropped.
3
SAFETY INSTRUCTIONS
Never touch this apparatus or antenna during
11
a thunder or lighting storm.
When mounting a TV on the wall, make sure
12
not to install the TV by the hanging power
and signal cables on the back of the TV.
Do not allow an impact shock or any objects
13
to fall into the product, and do not drop onto
the screen with something.
CAUTION concerning the Power Cord:
14
It is recommend that appliances be placed
upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner's manual to be certain.
Do not connect too many appliances to the
same AC power outlet as this could result in
fire or electric shock.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged
or cracked wire insulation are dangerous . Any
of these conditions could result in electric
shock or fire. Periodically examine the cord of
your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by
an authorized servicer. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the
cord exits the appliance.
Do not make the TV with the power cord
plugged in. Do not use a damaged or loose
power cord. Be sure do grasp the plug when
unplugging the power cord. Do not pull on
the power cord to unplug the TV.
WARNING - To reduce the risk of fire or elec-
15
trical shock, do not expose this product to
rain, moisture or other liquids. Do not touch
the TV with wet hands. Do not install this
product near flammable objects such as
gasoline or candles or expose the TV to
direct air conditioning.
Do not expose to dripping or splashing and
16
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
GROUNDING
17
Ensure that you connect the earth ground
wire to prevent possible electric shock (i.e. a
TV with a three-prong grounded AC plug
must be connected to a three-prong grounded AC outlet). If grounding methods are not
possible, have a qualified electrician install a
separate circuit breaker.
Do not try to ground the unit by connecting it
to telephone wires, lightening rods, or gas
pipes.
Power
Supply
Short-circuit
Breaker
DISCONNECTING DEVICE FROM MAINS
18
Mains plug is the disconnecting device. The
plug must remain readily operable.
4
As long as this unit is connected to the AC
19
wall outlet, it is not disconnected from the
AC power source even if you turn off this
unit by SWITCH.
ANTENNAS
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductor
(NEC Section 810-21)
Ground Clamps
Power Service Grounding
Electrode System (NEC
Art 250, Part H)
Ground Clamp
Electric Service
Equipment
20
Outdoor antenna grounding
If an outdoor antenna is installed, follow the
precautions below. An outdoor antenna system should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can come in contact
with such power lines or circuits as death or
serious injury can occur.
Be sure the antenna system is grounded so as
to provide some protection against voltage
surges and built-up static charges.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of
grounding conductors, location of antenna
discharge unit, connection to grounding electrodes and requirements for the grounding
electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Ventilation
23
Install your TV where there is proper ventilation. Do not install in a confined space such
as a bookcase. Do not cover the product
with cloth or other materials (e.g.) plastic
while plugged in. Do not install in excessively dusty places.
Take care not to touch the ventilation open-
24
ings. When watching the TV for a long
period, the ventilation openings may
become hot.
If you smell smoke or other odors coming
25
from the TV or hear strange sounds, unplug
the power cord contact an authorized service
center.
Do not press strongly upon the panel with
26
hand or sharp object such as nail, pencil or
pen, or make a scratch on it.
21
22
NEC: National Electrical Code
Cleaning
When cleaning, unplug the power cord and
scrub gently with a soft cloth to prevent
scratching. Do not spray water or other liquids
directly on the TV as electric shock may occur.
Do not clean with chemicals such as alcohol,
thinners or benzene.
Moving
Make sure the product is turned off, unplugged
and all cables have been removed. It may take
2 or more people to carry larger TVs. Do not
press against or put stress on the front panel
of the TV.
27
Keep the product away from direct sunlight.
For LCD TV
28
If the TV feels cold to the touch, there may be
a small “flicker” when it is turned on. This is
normal, there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the monitor's performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods of
time. Doing so may produce some temporary distortion effects on the screen.
Some of these features are not available on all models.
High-definition television. Highresolution digital television broadcast
and playback system composed of
roughly a million or more pixels, 16:9
aspect-ratio screens, and AC3 digital
audio. A subset of digital television,
HDTV formats include 1080i and 720p
resolutions.
AV Mode is three preset picture and
audio settings. It allows the viewer to
quickly switch between common settings. It includes Cinema, Sports, and
Game Modes.
A unique invisible speaker system
tuned by renowned audio expert, Mr.
Mark Levinson. Speakers are embedded in strategic spots behind the front
cabinet and use minute vibrations to
turn the entire front bezel into the
speaker system. The result s a clean,
polished look, and enhanced audio by
increasing the “sweet spot”, giving a
wider and richer sound field.
Automatically enhances and amplifies
the sound of human voice frequency
range to help keep dialogue audible
when background noise swells.
Unlike other sensors which can only
sense brightness of ambient light, LG’s
“Intelligent Sensor” uses 4,096 sensing steps to evaluate its surroundings.
Using a sophisticated algorithm, the LG
processes picture quality elements
including brightness, contrast, color,
sharpness and white balance. The result
is a picture optimized for it’s surroundings, more pleasing to watch and which
can also save up to 50% in power consumption.
Manufactured under license from Dolby
Laboratories. “Dolby “and the double-D
symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI logo and HighDefinition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC."
Displays HDTV programs in full 1920 x
1080p resolution for a more detailed
picture.
Advance 120Hz panel provides clearer,
smoother images, even during fast
action scenes creating a more stable
structure for a crisper picture.
View videos and photos and listen to
music on your TV through USB 2.0
(‘videos’ dependent on model).
ABOUT DIVX VIDEO: DivX® is a digital
video format created by DivX,Inc. This is
an official DivX Certified device that
plays DivX video. Visit www.divx.com for
more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be
registered in order to play DivX Videoon-Demand (VOD) content. To generate the registration code, locate the
DivX VOD section in the device setup
menu. Go to vod.divx.com with this
code to complete the registration process and learn more about DivX VOD.
“DivX Certified to play DivX video up to
HD 1080p, including premium content”
“Pat. 7,295,673; 7,460,688;7,519,274”
8
IMPORTANT INFORMATION TO PREVENT “IMAGE
BURN / BURN-IN” ON YOUR TV SCREEN
When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed
on the TV for an extended period, it can become permanently imprinted on the screen. This
phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.
In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged
period (2 or more hours for LCD, 1 or more
hours for Plasma).
Image burn can also occur on the letterboxed areas of your TV if you use the 4:3
aspect ratio setting for an extended period.
ON DISPOSAL
(Only Hg lamp used LCD TV)
The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this
product with general household waste. Disposal of this product must be carried out in accordance to
the re
ulations of your local authority.
PREPARATION
ENERGY
CHVOL
12
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
0
9
WXYZ
P
A
G
E
SAVING
TV
AV MODE
INPUT
LIGHT
FAV
RATIO
MUTE
BACK
EXIT
ENTER
MARK
DELETE
CHAR/NUM
LIST
FLASHBK
MENU
FREEZE
Q.MENU
INFO
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
The accessories included may differ from the images below.
1.5V 1.5V
PREPARATION
Owner’s ManualCD Manual
Not included with all models
* Wipe spots on the exterior only
with the polishing cloth.
* Do not wipe roughly when remov-
Polishing Cloth
ing stain. Excessive pressure may
cause scratch or discoloration.
32LD320, 32/42/47LD420
x 4
(M4 x 20)???
Screws for stand assembly
Screw for stand fixing
(Refer to P.16)
(Except 47LD420)
(Refer to P.22)
Remote Control,
Batteries (AAA)
Option Extras
D-sub 15 pin Cable
Protection Cover
(Refer to P.17)
When using the VGA (D-sub 15
pin cable) PC connection, the
user must use shielded signal
interface cables with ferrite cores
to maintain standards compliance.
Power Cord
32/42/47/55LD520
(Except 47/55LD520)(Except 55LD520)
x 4
(M4 x 20)???
Screws for stand assembly
(Refer to P.16)
Screw for stand fixing
(Refer to P.22)
Protection Cover
(Refer to P.17)
Power Cord
9
PREPARATION
19/22/26LE5300
(For 26LE5300)
PREPARATION
x 4x 4
(M4 x 14)(M4 x 20)
x 4
Screws for stand assembly
(Refer to P.16)
32/37/42/47/55LE5300, 42/47/55LE7300
x 8
(M4 x 20)
Screws for stand assembly
(Refer to P.16)
32/37/42/47LD450, 42/47/55LD630
x 8
(M4 x 20)
Screws for stand assembly
(Refer to P.16)
Cable Holder
(Refer to p.19)
(Except 55LE5300,
Screw for stand fixing
(Refer to P.22)
(For 32/37/42LD450,
42LD630)
Screw for stand fixing
(Refer to P.22)
55LE7300)
AC AdaptorRing spacers
Cable Holder
(Refer to p.19)
Protection Cover
(Refer to P.17)
x 2
Component/Audio Cable
(Refer to p.19)
Power Cord
10
OPTIONAL EXTRAS
Optional extras can be changed or modified for quality improvement without any notification new
optioal extras can be added.
Contact your dealer for buying these items.
Wireless Media Box
(AN-WL100W)
(For 42/47/55LE7300)
FRONT PANEL INFORMATION
VOLENTERCHMENUINPUT
Image shown may differ from your TV.
19/22/26/32/37/42/47/55LE5300,
42/47/55LE7300
SPEAKER
19/22LE5300
Remote Control Sensor
Power/Standby Indicator
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
(Can be adjusted using the Power Indicator
in the OPTION menu.
Źp.141)
26/32/37/42/47/55LE5300, 42/47/55LE7300
Remote Control Sensor
PREPARATION
Intelligent Sensor
Adjusts picture according to
the surrounding conditions
Power/Standby Indicator
Illuminates red in standby mode.
Turn off red smoothly when the TV is
switchced on.
Touch Button
Light the button by touching first. At this time, you can use the desired button.
CHANNEL
(
ᬨ,ᬧ)
Buttons
VOLUME
(-, +)
Buttons
ENTER
Button
MENU
Button
INPUT
Button
POWER
Button
䭞㲂䩍㮞
11
PREPARATION
H/PUSB IN
H/PUSB IN
IN 3
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/DVI
(DVI)
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
VIDEO
AUDIO
L(MONO)
R
VIDEO
AUDIO
YPBP
R
LR
COMPONENT IN
AV IN
RS-232C IN
(
CONTROL&SERVICE)
12
DC INDC IN
BACK PANEL INFORMATION
Image shown may differ from your TV.
PREPARATION
19/22/26LE5300
111324
19/22LE530026LE5300
8
5
9
67
8
1
9
16
Power Connection
1
Connect the AC adapter plug to the power
input jack on the TV.
2
Connect the power cord to the AC adapter
first, then plug the power cord into the wall
power outlet.
AC Adaptor
CAUTION
Ź Please be sure to connect the TV to the AC power adapter before connecting the TV’s
power plug to a wall power outlet.
32/37/42/47/55LE5300, 42/47/55LE7300
ANTENNA/
CABLE IN
RGB IN (PC)
AUDIO IN
(RGB/DVI)
RS-232C IN
(CONTROL &
SERVICE)
OPTICAL
DIGITAL
AUDIO OUT
/DVI IN
VIDEO
AUDIO
L(MONO)
R
VIDEO
AUDIO
COMPONENT IN
AV IN 1
YPBP
R
LR
1
COMPONENT IN3
AUDIO / Y P
B
P
R
IN 4
H/P
USB IN 1USB IN 2
AV IN2
VIDEO / AUDIO
10
PREPARATION
1
234
10
8
5
11
6
2
76
CAUTION
For HDMI IN 4 and USB IN
1/2
Ź For an optimal connection,
HDMI cables and USB
devices should have bezels
less than 0.39 inches (10
mm) thick.
*A0.39 inches (10 mm)
17
PREPARATION
1
HDMI/DVI IN, HDMI IN
Digital Connection.
Supports HD video and Digital audio. Doesn’t
support 480i.
Accepts DVI video using an adapter or HDMI
to DVI cable (not included).
2
RGB IN (PC)
Analog PC Connection. Uses a D-sub 15 pin
cable (VGA cable).
AUDIO IN (RGB/DVI)
1/8” (0.32 cm) headphone jack for analog PC
audio input.
3
OPTICAL DIGITAL AUDIO OUT
Digital optical audio output for use with amps
and home theater systems.
Note: In standby mode, this port doesn’t work.
4
RS-232C IN (CONTROL & SERVICE) PORT
Used by third party devices.
This port is used for service or Hotel mode.
7
COMPONENT IN
Analog Connection.
Supports HD.
Uses a red, green, and blue cable for video &
red and white for audio.
8
USB INPUT
Used for viewing photos and listening to
MP3s.
9
HEADPHONE INPUT
Plug the headphone into the headphone
socket.
10
Power Cord Socket
For operation with AC power.
Caution: Never attempt to operate the TV on
DC power.
11
DC-IN
5
AV (Audio/Video) IN
Analog composite connection. Supports stan-
dard definition video only (480i).
6
ANTENNA/CABLE IN
Connect over-the air signals to this jack.
Connect cable signals to this jack.
19
PREPARATION
!
PREPARATION
STAND INSTRUCTIONS
Image shown may differ from your TV.
(For 19/22LE5300)
INSTALLATION
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
Assemble the parts of the STAND BODY
2
with the STAND BASE of the TV.
STAND BODY
Assemble the TV as shown.
3
Fix the 4 screws securely using the holes in
4
the back of the TV.
NOTE
Ź When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
STAND BASE
M4 x 14
20
DETACHMENT
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
Remove the screws from the TV.
2
PREPARATION
Detach the stand from TV.
3
Grip the knob in your fingers and push it.
4
STAND BASE
21
PREPARATION
!
PREPARATION
STAND INSTRUCTIONS
Image shown may differ from your TV.
(For 26/32/37/42/47/55LE5300, 42/47/55LE7300)
INSTALLATION
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Assemble the parts of the STAND BODY
2
with the STAND BASE of the TV.
STAND BODY
M4 x 20
STAND BASE
Assemble the TV as shown.
3
Assemble the part of the STAND
4
REAR COVER with the TV.
Fix the 4 screws securely using the holes in
5
the back of the TV.
NOTE
Ź When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
STAND REAR
COVER
M4 x 20
22
DETACHMENT
Carefully place the TV screen side down on
1
a cushioned surface to protect the screen
from damage.
Remove the screws from the TV.
2
PREPARATION
Detach the STAND REAR COVER from TV.
3
Detach the stand from TV.
4
23
PREPARATION
VESA WALL MOUNTING
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer.
PREPARATION
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
We recommend that you use an LG brand wall mount when mounting the TV to a wall.
LG recommends that wall mounting be performed by a qualified professional installer.
mount used. For further information, refer to
the instructions included with the mount.
Ź Standard dimensions for wall mount kits are
shown in the table.
Ź When purchasing our wall mount kit, a detailed
installation manual and all parts necessary for
assembly are provided.
Ź Do not use screws longer then the standard
dimension, as they may cause damage to the
inside to the TV.
Ź For wall mounts that do not comply with the
VESA standard screw specifications, the length
of the screws may differ depending on their
specifications.
Ź Do not use screws that do not comply with the
VESA standard screw specifications.
Do not use fasten the screws too strongly, this
may damage the TV or cause the TV to a fall,
leading to personal injury. LG is not liable for
these kinds of accidents.
Ź LG is not liable for TV damage or personal
injury when a non-VESA or non specified wall
mount is used or the consumer fails to follow
the TV installation instructions.
CAUTION
Ź Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to
electric shock.
PREPARATION
For 19/22/26LE5300
4-RING SPACERS
Place the ring spacers on the set before installing the wall
mounting bracket so that the inclination of the backside
of the set can be adjusted perpendicularly.
To connect additional equipment, see the
EXTERNAL EQUIPMENT SETUP section.
Open the CABLE MANAGEMENT CLIP as
2
shown.
30
CABLE MANAGEMENT CLIP
Put the cables inside the CABLE
3
MANAGEMENT CLIP and snap it closed.
19/22/26LE5300
After connecting the cables as necessary,
1
install the CABLE HOLDER as shown
and bundle the cables.
32/37/42/47/55LE5300, 42/47/55LE7300
Secure the power cord with the CABLE
1
HOLDER on the TV back cover.
It will help prevent the power cable from
being removed by accident.
PREPARATION
AC-IN
K
CABLE HOLDER
After connecting the cables as necessary,
2
install the CABLE HOLDER as shown
and bundle the cables.
CABLE HOLDER
CABLE HOLDER
31
PREPARATION
DESKTOP PEDESTAL INSTALLATION
Image shown may differ from your TV.
PREPARATION
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
4 inches
4 inches
4 inches
4 inches
CAUTION
Ź Ensure adequate ventilation by following the clearance recommendations.
Ź Do not mount near or above any type of heat source.
SWIVEL STAND
After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees
to suit your viewing position.
(Except
19/22/26LE5300
)
32
ATTACHING THE TV TO A DESK
(For 32LD320, 32/42LD420, 32/37/42LD450
42/47LE7500
Image shown may differ from your TV.
The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, poten-
tially causing injury or damaging the product.
1-Screw
( provided as parts of the product)
)
, 32/42LD520, 42LD630, 32/37/42/47LE5300,
Stand
Desk
WARNING
Ź To prevent TV from falling over, the TV should be securely attached to the floor/wall per installa-
tion instructions. Tipping, shaking, or rocking the machine may cause injury.
PREPARATION
KENSINGTON SECURITY SYSTEM
This feature is not available for all models.
- The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security
System cable as shown below.
- For the detailed installation and use of the Kensington Security
System, refer to the user’s guide provided with the Kensington
Security System.
For further information, contact http://www.kensington.com,
the internet homepage of the Kensington company. Kensington
sells security systems for expensive electronic equipment such
as notebook PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.
33
PREPARATION
!
SECURING THE TV TO THE WALL TO PREVENT FALLING
WHEN THE TV IS USED ON A STAND
PREPARATION
You should purchase necessary components to prevent the TV from tipping over (when not using a
wall mount).
Image shown may differ from your TV.
We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward
direction, potentially causing injury or damaging the product.
Caution: Please make sure that children don’t climb on or hang from the TV.
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the
picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the
bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket
that is mounted on the wall to the holes in the product.
Ensure the eye-bolts or brackets are tightened securely.
Use a sturdy rope (sold separately) to tie the product. It is safer to tie the
rope so it becomes horizontal between the wall and the product.
NOTE
Ź Use a platform or cabinet strong enough and large enough to support the size and weight of
the TV.
Ź To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are
the same.
34
ANTENNA/
CABLE IN
ANTENNA/
CABLE IN
To prevent damage do not connect to the power outlet until all connections are made between the
devices.
Image shown may differ from your TV.
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box
Connections.
For optimum picture quality, adjust antenna direction if needed.
Wall
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Antenna
Socket
Outdoor
RF Coaxial Wire (75 ohm)
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
2. Cable
PREPARATION
Copper Wire
Be careful not to bend the copper wire
when connecting the antenna.
Cable TV
Wall Jack
RF Coaxial Wire (75 ohm)
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install
properly.
If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.
If the antenna is not installed properly, contact your dealer for assistance.
Refer to http://AntennaWeb.org for more information about antennas and Digital TV.
35
EXTERNAL EQUIPMENT SETUP
ANTENNA/
CABLE IN
AUDIO IN
RGB/DVI
VI)
OPTICAL
DIGITAL
AUDIO OUT
AV I N
RS-232C IN
(
CONTROL&SERVICE)
VIDEO
AUDIO
L(MONO)
R
VIDEO
AUDIO
YPBP
R
LR
COMPONENT IN
YLRPBP
R
EXTERNAL EQUIPMENT SETUP
To prevent the equipment damage, never plug in any power cords until you have finished connecting all
equipment.
I
mage shown may differ from your TV.
HD RECEIVER SETUP
This TV can receive digital over-the-air/digital cable signals without an external digital set-top box.
However, if you do receive digital signals from a digital set-top box or other digital external device.
EXTERNAL EQUIPMENT SETUP
Component Connection
1. How to connect
Connect the video outputs (Y, PB, PR
1
digital set-top box to the COMPONENT IN
VIDEO jacks on the TV. Match the jack colors (Y
= green, P
Connect the audio output of the digital set-top
2
box to the COMPONENT IN AUDIO jacks on
the TV.
2. How to use
Turn on the digital set-top box.
(
Refer to the owner’s manual for the digital set-top
box operation.
Select the Component input source on the TV
using the
Supported ResolutionsY, C
)
of the
B = blue, and PR = red).
)
INPUT button on the remote control.
12
B/PB, CR/PR
SignalComponentHDMI
480iYesNo
480pYesYes
720pYesYes
1080iYesYes
1080pYesYes
Resolution
720x480i
720x480p
1280x720p
1920x1080i
Horizontal
Frequency(KHz
)
15.7359.94
15.7360.00
31.4759.94
31.5060.00
44.9659.94
45.0060.00
33.7259.94
33.7560.00
Vertical
Frequency(KHz
)
26.9723.976
1920x1080p
27.0024.00
33.7129.97
33.7530.00
67.43259.94
67.5060.00
36
HDMI Connection
!
DC-IN
RGB IN (PC)
AUDIO IN
RGB/DVI
OPTICAL
DIGITAL
AUDIO OUT
COMPONENT IN
AV I N
RS-232C IN
(
CONTROL&SERVICE)
VIDEO
AUDIO
L(MONO)
R
VIDEO
AUDIO
YPBP
R
LR
(DVI)
/DVI IN
12
HDMI OUTPUT
1. How to connect
Connect the digital set-top box to HDMI/DVI IN
1
1, 2, or 3* jack on the TV.
No separate audio connection is necessary.
2
HDMI supports both audio and video.
2. How to use
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-
top box.
Select the HDMI1, HDMI2, or HDMI3* input source
on the TV using the INPUT button on the remote
control.
* HDMI 3: For 26LE5300
)
EXTERNAL EQUIPMENT SETUP
1
NOTE
Ź Check HDMI cable over version 1.3.
If the HDMI cables don’t support HDMI version 1.3, it
can cause flickers or no screen display. In this case use
the latest cables that support HDMI version 1.3.
Ź HDMI Audio Supported Format: AC3 (32KHz,
44.1KHz,48KHz), Linear PCM (32KHz, 44.1KHz,48KHz)
HDMI-DTV
Resolution
720x480p
1280x720p
1920x1080i
1920x1080p
Horizontal
Frequency(KHz
31.47 59.94
31.5060.00
44.9659.94
45.0060.00
33.7259.94
33.7560.00
26.9723.976
27.0024.00
33.7129.97
33.7530.00
67.43259.94
67.5060.00
)
Vertical
Frequency(KHz
)
37
Loading...
+ 66 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.