LG 22LB4510 Owner’s Manual

OWNER’S MANUAL

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV and retain it for future reference.

22LB4510 24LB4510 29LB4510 29LB4505

*MFL67162479*

www.lg.com

P/NO : MFL67162479 (1407-REV03)

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

Read these instructions.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of

ENGLISH

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

Keep these instructions. Follow all instructions. Heed all warnings.

• Do not allow the television to become wet.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install

in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

• Do not press strongly upon the panel with a

hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

IMPORTANT SAFETY INSTRUCTIONS

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified

by the manufacturer.

• Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms

or when unused for long periods of time.

• Refer all servicing to qualified service

personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Do not stick metal objects or any other

conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

• Keep the packing anti-moisture material

or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

• CAUTION concerning the Power Cord

(Can differ by country) It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Warning - To reduce the risk of fire or

electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not expose to dripping or splashing and

do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

• Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power Supply

Short-circuit Breaker

• As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

• Do not attempt to modify this product in

any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this

ENGLISH

product.

• Outdoor Antenna Grounding

(Can differ by country) If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Ground Clamp

Electric Service

Equipment

Ground Clamp

NEC: National Electrical Code

Antenna Lead in Wire

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Power Service Grounding Electrode System (NEC Art 250, Part H)

• Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzine.

• Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

• Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

• If you smell smoke or other odors coming

from the TV, unplug the power cord and contact an authorized service center.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during

a lightning storm.

• When mounting a TV on the wall, make sure

not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not allow an impact shock, any objects to

fall into the product, and do not drop anything onto the screen.

• DISCONNECTING DEVICE FROM THE MAIN

POWER

Mains plug is the disconnecting device. The plug must remain readily operable.

• Store the accessories (battery, etc.) in a safe

location out of the reach of children.

• This apparatus uses batteries. In your

community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow

the batteries to overheat.

IMPORTANT SAFETY INSTRUCTIONS

• Dot Defect

The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

• Generated Sound

Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

• Take care not to touch the ventilation

openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

• Do not install this product on a wall if it

could be exposed to oil or oil mist. This may damage the product and cause it to fall.

• If the TV feels cold to the touch, there may

be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Preventing image burn or burn-in on your TV screen

• If a fixed image displays on the TV screen for

a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

• If the aspect ratio of the TV is set to 4:3 for a

long period of time, image burn may occur on the letterboxed area of the screen.

• Avoid displaying a fixed image on the TV

screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

For USA and Canada

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and the receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the

ENGLISH

party responsible for compliance could void the user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

For USA

LG Recycling Policy

LG Electronics offers a customized e-waste take-back and recycling service that meets local needs and requirements in the countries where e-waste regulations are in place, and also provides product and packaging take-back and recycling service voluntarily in some countries. LG Electronics evaluates products’ recyclability at the design step using LG’s recyclability evaluation tool, with the goal of improving recyclability where practicable. Through these activities, LG seeks to contribute to conserving natural resources and protecting the environment. For more information about the LG Recycling Policy, please visit our global site at http://www.lg.com/global/sustainability/environment/take-back-recycling

LICENSES

LICENSES / OPEN SOURCE SOFTWARE NOTICE

Supported licenses may differ by model. For more information about licenses, visit

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

www.lg.com

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

http://opensource.lge.com

ENGLISH

NOTE

Image shown may differ from your TV.

Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

The available menus and options may differ from the input source or product model that you

are using. New features may be added to this TV in the future.

The TV can be placed in standby mode in order to reduce the power consumption. And the

TV should be turned off if it will not be watched for some time, as this will reduce energy consumption. The energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

Remote Control, Batteries (AAA)

Owner's Manual Stand Base

(For 22/24LB4510)

ENGLISH

(Depending upon model)

Power Cord AC/DC Adapter AC/DC Adapter

(Depending upon model)

CAUTION

• Do not use any unapproved items to ensure the safety and product’s lifespan.

• Any damages or injuries by using unapproved items are not covered by the warranty.

• Some models appear to have a thin film on the screen. It is actually part of the screen; do not

remove it.

NOTE

• The items supplied with your product may vary depending upon the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.

• Use an extension cable that supports USB 2.0 if the USB cable or

USB flash drive does not fit into your TV’s USB port.

*A 10 mm (0.39 inches)

*B 18 mm (0.7 inches)

Stand Base (For 29LB4510/4505)

ASSEMBLING AND PREPARING

Parts and buttons

(For 22/24LB4510)

Screen

NOTE

• Joystick button is located

below the screen of TV.

Joystick Button

Speakers

Using the joystick button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic functions

Power On

Power Off

Volume Control

Channels Control

When the TV is turned off, place your finger on the joystick button, press it once and release it.

When the TV is turned on, place your finger on the joystick button, press it once for a few seconds and release it.

(However, if the Menu button is on the screen, pressing and holing the joystick button will let you exit the Menu.)

If you place your finger over the joystick button, move it left or right, you can adjust the volume level you want.

If you place your finger over the joystick button, move it up or down, you can scroll through the saved channels you want.

Remote Control Sensor Power Indicator

- Red When the power is turned off Off When the power is turned on

- Amber When the power is in power saving mode

ENGLISH

NOTE

• With your finger over the joystick button, move it up, down, left, or right, be careful not to press the

joystick button. If you press the joystick button first, you can not adjust the volume level and/or scroll through saved channels.

Adjusting the menu

When the TV is turned on, press the joystick button one time. You can adjust the menu items ( , , , ) moving the joystick button up, down, left, or right.

TV off

Settings

Input List

Turns the power off. Accesses the main menu. Clears on-screen displays and returns to TV viewing. Changes the input source.

ASSEMBLING AND PREPARING

INPUT

SETTINGS

(For 29LB4510/4505)

ENGLISH

Screen

Speakers

Touch Buttons

Touch Button Description

Scrolls through the saved channels. Adjusts the volume level.

OK Selects the highlighted menu option or confirms an input. SETTINGS Accesses the main menus, or saves your input and exits the menus. INPUT Changes the input source.

Turns the power on or off.

NOTE

All of the buttons are touch sensitive and can be operated through simply touching with your

finger.

Setting up the TV

Image shown may differ from your TV.

ASSEMBLING AND PREPARING

Attaching the stand

Stand Base

Detaching the stand

Stand Base

NOTE

Lift up the latch at the bottom of the

stand base and detach the stand base from the TV.

ENGLISH

CAUTION

When attaching the stand to the TV

set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

ASSEMBLING AND PREPARING

Do not carry the TV upside-down by

holding the stand body (or stand base) as this may cause it to fall off, resulting in damage or injury. The illustration shows a general example

of installation and may look different from the actual product.

ENGLISH

CAUTION

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

• Avoid touching the screen at all times, as

this may result in damage to the screen.

• Do not place the product on the floor with its

front facing down without padding. Failure to do so may result in damage to the screen.

• It is recommended to move the TV in the

box or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect

the power cord and all cables.

• When holding the TV, the

screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

• When transporting the TV, do not expose the

TV to jolts or excessive vibration.

• When transporting the TV, keep the TV

upright; never turn the TV on its side or tilt towards the left or right.

CAUTION

• When handling the TV, be careful not to

damage the protruding joystick button. (Depending upon model)

ASSEMBLING AND PREPARING

(4 inches)

Mounting on a table

Lift and tilt the TV into its upright position on

a table.

- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

10 cm

2 Connect the AC/DC Adapter and Power

Cord to a wall outlet.

DC-IN

(19V )

CAUTION

• Do not place the TV near or on sources

of heat, as this may result in fire or other damage.

• Please be sure to connect the TV to the

AC/DC power adapter before connecting the TV’s power plug to a wall power outlet.

ENGLISH

AC-DC Adapter

DC-IN

(19V )

AC-DC Adapter

ASSEMBLING AND PREPARING

Using the Kensington security system(optional)

(Depending upon model)

The Kensington security system connector is located at the back of the TV. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit

Connect the Kensington security system cable between the TV and a table.

http://www.kensington.com.

ENGLISH

NOTE

The Kensington security system is optional.

You can obtain additional accessories from

most electronics stores.

ASSEMBLING AND PREPARING

(4 inches)

Mounting on a wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.

10 cm

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model

VESA (A x B)

Standard screw M4 x L10 Number of screws 4 Wall mount bracket

(optional)

10 cm

22LB4510 24LB4510

75 x 75 100 x 100

RW120

29LB4510 29LB4505

CAUTION

• Disconnect the power before moving or

installing the TV. Otherwise electric shock may occur.

• If you install the TV on a ceiling or slanted

wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. When using a third-party wall mount, it is not covered by the warranty.

• Do not over tighten the screws as this may

cause damage to the TV and void your warranty.

• Use the screws and wall mounts that meet

the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

• Screw length from outer surface of back

cover should be under 8 mm (0.3 inches).

Wall Mount Pad

Back Cover

Wall Mount Pad

Back Cover

Standard screw

: M4 x L10

Max. 8 mm

(0.3 inches)

NOTE

Use the screws that are listed on the

VESA standard screw specifications. The wall mount kit includes an

installation manual and necessary parts. The wall mount bracket is optional. You

can obtain additional accessories from your local dealer. The length of screws may differ

depending upon the wall mount. Be sure to use the proper length. For more information, refer to the

instructions supplied with the wall mount.

ENGLISH

MAKING CONNECTIONS

ANTENNA /CABLE IN

MAKING CONNECTIONS

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

NOTE

• If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input

cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

• The external device connections shown may differ slightly from illustrations in this manual.

• Connect external devices to the TV regardless about the order of the TV port.

• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• Refer to the external equipment’s manual for operating instructions.

Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV. The illustrations may differ from the actual items and an RF cable is optional.

ENGLISH

CAUTION

• Make sure not to bend the copper wire of

the RF cable.

Copper wire

• Complete all connections between devices,

and then connect the power cord to the power outlet to prevent damage to your TV.

VHF Antenna

UHF Antenna

Antenna

R/F Cable (75Ω)

(*Not provided)

Terminal

NOTE

• Use a signal splitter to use 2 TVs or more.

• DTV Audio Supported Codec: MPEG, Dolby

Digital

MAKING CONNECTIONS

VIDEO

AUDIO

(MONO)

AV IN

COMPONENT IN

HDMI IN

RGB IN (PC)

DC-I

(19 V )

USB IN

5 V 0.5 A

ERVI

NIY

VIDEO

AUDIO

(MONO)

AV IN

COMPONENT IN

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable as shown. Depending upon the model, a cable may be provided.

Blu-Ray / HD Cable Box

/ HD STB / DVD / PC

DVD / Blu-Ray / HD Cable Box / VCR

The USB port provides 0.5A electric current. If you need more electric current in the case of an HDD,

use a separate power adaptor.

DVD / Blu-Ray / HD Cable Box

USB / HDD

ENGLISH

+ 39 hidden pages