LG 21SA1AG, 21SB6RD-T4 Manual book

OWNER’S MANUAL

Colour Television

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this infor-

mation to your dealer when you require service.

Model number :

Serial number :

P/NO :MFL67020329-EN (CW81A/B/F/G)(1301-REV00)

www.lg.com

Power

This set operates on an AC mains supply, the volt-

age is as indicated on the label on the back cover.

Never apply DC power to the set. In the event of

thunderstorms or powercuts, please pull out the

aerial and mains plugs.

Press the POWER button on the front panel or side panel

to turn off the TV when the TV set is not being used for a

long time.It is recommended to remove the plug from the

wall outlet(Power point).

Disconnecting device from mains

Mains plug is the disconnecting device. The plug

must remain readily operable

Warning

To prevent fire or shock hazard, do not expose the set

to rain or moisture.Do not place anything containing liq-

uid on top of the set, this may cause a fire or could give

an electric shock.

Service

Never remove the back cover of the set as this can

expose you to very high voltage and other hazards. If

the set does not operate properly, unplug it and call

your dealer.

Aerial

Connect the aerial cable to the socket on the back

cover. For the best reception an outdoor aerial

should be used.

Location

Position your set so that no bright light or sunlight

falls directly onto the screen. Care should be

taken not to expose the set to any unnecessary

vibration, moisture, dust or heat. Also ensure that

the set is placed in a position to allow a free flow

of air. Do not cover the ventilation openings on the

back cover.

Installation

Connection of external equipment

Aerial socket

1. Connect the RF out socket of the VCR to the

aerial socket on the back of the set.

2. Connect the aerial cable to the RF aerial in

socket of the VCR.

3. Store the VCR channel on a desired pro-

gramme number using the ‘Manual pro-

gramme tuning’ section.

4. Select the programme number where the

VCR channel is stored.

5. Press the PLAY button on the VCR.

Audio/Video in/out sockets (option)

1. Connect the audio/video out sockets of the VCR

to audio/video in sockets of the set and in sock-

ets of the VCR to RF OUT sockets of the set.

2. If the VCR is connected to the AV sockets on the

set, press the TV/AVbutton to select AV1 or AV2.

3. Press the PLAY button on the VCR.The VCR

playback picture appears on the screen.

You can also record programmes received by the

TV on video tape via audio/video out sockets.

Note : If you have a mono VCR, connect the

audio cable from the VCR to the AUDIO L/MONO

socket of the set.

Euro scart socket (option)

1. Connect the Euro scart socket of the VCR to

the Euro scart socket of the set.

2. Press the PLAY button on the VCR.

If your VCR outputs a switching voltage when

connected to Euro scart socket, the set will

switch to AV 1 mode automatically. But if you

want to keep on watching TV mode, press the

or NUMBER buttons.Otherwise press

the TV/AV button on the remote control

handset to select AV 1 The VCR playback pic-

ture appears on the screen.

You can also record programmes received by the

TV on video tape.

Note : Signal type RGB, i.e. the signals red, green

and blue can only be selected for the Euro scart

socket. These signals are transmitted, for exam-

ple, by a pay TV decoder, game machine or photo

CD unit, etc.

Component in sockets (option)

1. Connect the COMPONENT video output

sockets (Y Cb Cr, Y Pb Pr or YB-Y R-Y) of the

COMPONENT (480i) to the COMPONENT

INPUT sockets (Y PB PR) on the set.

2. Connect the audio cable from the COMPO-

NENT to AUDIO IN sockets of AV IN2.

3. Press the TV/AVbutton to select COMPONENT.

4. Press the PLAY button on the COMPONENT.

The COMPONENT playback picture appears

on the screen.

Headphone socket (option)

You can listen to the sound through the head-

phones. To adjust the headphone volume, press

the F / G button.

If you press the MUTE button, the sound from the

headphone’s is switched off.

Location and function of controls

Battery installation

The remote control handset is powered by AAA

type batteries.Install batteries as indicated by the

polarity symbols ( and ) marked inside the

compartment.

Note : To avoid damage from possible battery

leakage, remove the batteries if you do not plan to

use the remote control handset for an extended

period of time

Remote control handset

Before you use the remote control handset,

please install the batteries.

1. POWER

switches the set on from standby or off to

standby.

2. NUMBER BUTTONS

Switches the set on from standby or directly

select a number.

3. MENU

selects a menu.

(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

(Volume Up/Down)

adjusts the volume.

adjusts menu settings.

accepts your selection or displays the current

mode.

SLEEP

sets the sleep timer.

6. FAVOURITE

or FAVOURITE/

(option)

selects a favorite programme.

EYE/

(option)

switches the eye function on or off.

MUTE( )

switches the sound on or off.

TV/AV( )

selects TV or AV mode.

switches the set on from standby.

exits the Teletext mode.

I/II/

(option)

selects the language during dual language

broadcast.

selects the sound output (option).

. Q.VIEW (or YELLOW)

returns to the previously viewed programme.

LIST or LIST/ (or BLUE)(option)

displays the programme table.

: No function

COLOURED BUTTONS : These buttons are

used for teletext (only TELETEXT models) or pro-

gramme edit.

Location and function of controls

Front panel

MAIN POWER (ON/OFF)

switches the set on or off.

POWER/STANDBY INDICATOR

illuminates brightly when the set is in standby

mode.dims when the set is switched on.

REMOTE CONTROL SENSOR

Note : Only use the supplied remote control

handset. (When you use others, they will not

be able to function.)

selects a menu.

accepts your selection or displays the current

mode.

(Volume Down/Up)

adjusts the volume.

adjusts menu settings.

(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

EYE (option)

adjusts picture according to the surrounding

conditions.

Note :

What is shown here may be somewhat dif-

ferent from your set or can not be supplied

on your area.

MUTE

TV/AV

EYE /

POWER

123

FAVOURITE

Q.VIEW LIST

SLEEP

VOL

I/II/

Basic operation

On and off

1. Press the main power button to switch the set on.

2. If the set is in standby mode, press the

POWER,

, TV/AVor NUMBER buttons on

the remote control handset to switch it on fully.

3. Press the POWER button on the remote con-

trol handset.

The set reverts to standby mode.

4. Press the main power button again to switch

the set off.

Note : If, while the set is switched on, the mains

plug is disconnected the set will switch to standby

or power on when the mains plug is replaced in

the mains power socket.

Mute function

Press the MUTE button. The sound is switched off

and the display

appears.

You can cancel it by pressing the MUTE,

I/II/

(option), button.

On screen language selection

The menu can be displayed on the screen in

desired language. First select your language.

1. Press the MENU button and then

but-

ton to select the Special menu.

2. Press the

button to select Language.

3. Press the

button and then

button to

select your desired language.

All the on screen displays will appear in the

selected language.Press the OK or

button

to select the Special menu.

4. Repeatedly press the MENU button to return

to normal TV viewing.

TV and AV modes

AV mode is used when a video cassette recorder

(VCR), or other equipment is connected to the set.

Note : When a VCR is connected via the aerial

socket the set is used in TV mode. See the

‘Connection of external equipment’ section.

AV1 : VCR connected to the Euro scart socket

or AV IN 1 sockets on the set

AV2 : VCR connected to the AV IN 2 sockets

on the set.(option)

COMPONENT : DVD Player connected to the

COMPONENT sockets on the set (option)

Alternatively you can select the TV or AV mode by

pressing the TV/AV button.

In AV mode, to return to TV mode, press the

or NUMBER buttons.

Monitor Out

Note: If you connect VIDEO IN jack to the TV

that is displayed COMPONENT mode, the

second TV or the monitor displays AV IN mode.

Auto AV switching (option)

If your VCR outputs switching voltage when it is

switched to playback with the VCR connected to the

Euro scart socket. The set is automatically switched

AV(or AV1) mode when an AV signal is input. But

if you want to keep on watching TV mode, press the

or NUMBER buttons. Press the TV/AV button

to return to AV modes.

Child lock

The TV can be set so that the remote control hand-

set is needed to control it. This feature can be used

to prevent unauthorized viewing.

With the lock on, the display

Child lock on

appears on the screen if any button on the front

panel is pressed while viewing the TV.

Degaussing

Due to the super large Tube in the set. The colour

purity of the picture may be affected by other mag-

netic influences such as speakers. Stripes may

appear on the screen or there may be colour

patches.

Note : If you cannot adjust the screen condition by

degaussing, try it again after about 4 minutes.

Games (option)

Game is an optional function, only a set with game can

perform this function by using the remote control handset.

You can enjoy the game by using the GAME

owner’s manual.

Note :

a. Press the TV/AV or MENU button to return to

the normal TV viewing.

b. If you want a new game, press the RED button

to start during the game.

Sleep timer

You don’t have to remember to switch the set off

before you go to sleep. The sleep timer automati-

cally switches the set to standby after the preset

time elapses.

Repeatedly press the SLEEP button to select the

number of minutes. The display - - - will appear

on the screen, followed by 10, 20, 30, 60, 90, 120,

180 and 240.The timer begins to count down from

the number of minutes selected.

Note :

a. To view the remaining sleep time, press the

SLEEP button once.

b. To cancel the sleep time, repeatedly press the

SLEEP button until the display

- - -

appears.

c. When you switch the set off, the set releases

the preset sleep time.

On screen menus

The dialogue between you and your set takes

place on screen with an operator menu. The but-

tons required for the operating steps are also dis-

played.

Menu selection

1. Press the MENU button and then

but-

ton to display each menu.

2. Press the

button and then

button to

select a menu item.

3. Press the

button to display the sub menu or

the pull-down menu.

4. Change the setting of an item in the sub or

pull-down menu with the

You can move to the higher level menu with

the OK or

button and to move to the lower

level menu press the

button.

Note :

a. In the teletext mode, menus are not displayed.

b. In some models,

Turbo Snd.

AVL

Balance

X-WAVE

Treble

Bass

will not display in the

Sound menu.

c. In some models,

Language

Game, SSM

will not display in the Special menu.

Auto programme tuning

All stations that can be received are stored by this

method. It is recommended that you use auto pro-

gramme during installation of this set.

System :

BG :(Asia/NewZealand/ M.East/Africa/Australia)

I :(Hong Kong/South Africa)

DK :(East Europe/China/Africa/CIS)

L :(SECAM L/L’ (France) (option)

M : (USA/Korea/Philippines) (option)

Note : a.

Turbo search

is faster than

Normal

and in some models, these searches will

automatically store all receivable sttions.

b.If the programmed station has poor quality and

sound, select the system again in the

Manual

programme

menu.

Manual programme tuning

Manual programme lets you manually tune and

arrange the stations in whatever order you desire.

Also you can assign a station name with five char-

acters to each programme number.

Booster (option)

If the reception is poor at the fringe area of the TV

signal, select Booster to On.

Fine tuning

Normally fine tuning is only necessary if reception

is poor.The finely tuned programme will be indi

cated by yellow number during programme selection.

Programme edit

Deleting a programme

1. Select a programme to be deleted with the

button.

2. Press the RED button twice.

The selected programme is deleted, and all the

following programmes are shifted up one position.

Copying a programme

1. Select a programme to be copied with the

button.

2. Press the GREEN button.

All the following programmes are shifted down

one position.

Moving a programme

1. Select a programme to be moved with the

button.

2. Press the YELLOW button.

3. Move the programme to the desired pro-

gramme number with the

button.

4. Press the YELLOW button again to release

this function.

Skipping a programme number

1. Select a programme number to be skipped with

the

button.

2. Press the BLUE button. The skipped pro-

gramme turns to blue.

3. Press the BLUE button again to release the

skipped programme. When a programme

number is skipped it means that you will be

unable to select it using the

button dur-

ing normal TV viewing. If you want to select

the skipped programme, directly enter the pro-

gramme number with the NUMBER buttons or

select it in the programme edit or table menu.

Repeatedly press the MENU button to return to

normal TV viewing.

Calling the programme table

You can check the programmes stored in the

memory by displaying the programme table.

Note :a.You may find some blue programmes.

They have been set up to be skipped by auto pro-

gramming or in the programme edit mode.

b.Some programmes with the channel number

shown in the programme table indicate there is no

station name assigned.

Setting up TV stations

TV programme

Picture menu

Delete Copy

Move Skip

)

}{ OK MENU

(

O C 1D 5 S 69

1 C 03 6 S 17

2 C 12 7 S 22

3 S 66 8 C 09

4 S

67 9 C 11

Prog. edit

Station

Auto prog. {

Manual {

Prog. edit {

Favourite

{

)

}{ OK MENU

Station menu

(

Auto prog.

System {

Storage {

Normal {

Turbo {

System {

)

}{ OK MENU

(

Picture

PSM {

XD {

CSM {

Contrast {

Brightness {

Colour

{

Sharpness

{

)

}{ OK MENU

(

Sound

SSM {

Turbo Snd. {

AVL {

Balance {

Treble {

Bass {

X-WAVE

{

)

} { OK MENU

(

Time

Clock {

Off time {

On time {

Auto off {

)

}{ OK MENU

(

Sound menu

Special

Language {

Input {

Child lock {

)

}{ OK MENU

(

Time menu

Special menu

+ 11 hidden pages