LG 21MT47A-PT Manual book

Drawn Approved

Signature

Jiyoung.choi Jongok.Kim

MMM/DD/YYYY

Jan/02/2015 Jan/02/2015

24MT48A-PTP LG MFL68783002 FL 24MT48A (1506-REV02)

:LGEAK :LGEKR :LGERS :LGEAZ :LGEMA :LGESY :LGEEG :LGEMX :LGETH :LGEIL :LGEND :LGEIN :LGERA :LGEAS :LGEWR

Signature

Change Contents

ECO Number

N O T E

“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,

Details should be followed Eco-SCM management standard[LG(56)-A-2524].

Especially, Part should be followed and controlled the following specification.

(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.

(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

Printed in China

Printed in Thailand

Printed in Vietnam

Printed in Poland

Adding the model (21MT47A)

EKMF400001

Jun/15/2015

Jiyoung.choi

EKMF600355

Added the model (24MT57AC)

Jiyoung.choi

Apr/01/2015

4. Changes

Printed in Mexico

Printed in Egypt

Printed in India

Printed in Algeria

3. Stock (Paper)

: • Cover

Printed in Indonesia

Printed in Russia

Made by LG Electronics (Only TW Suffix)

: • Cover

: • Inside

Printed in Korea

: • Inside

:4. Bindery

(Revision number)

2. Printing Specification

Rev. Number

MM/DD/YYYY

148 mm x 210 mm (A5)

1 Color (Black)

Uncoated, wood-free paper 60 g/㎡

Saddle stitching

ENG (1)

3. Origin Notification

:LGEVN

Checked

Jan/02/2015

Seounggeun.Kim

:Part number

1. Model Description

Printing specification

Printed in Mexico

Printed in Poland

Printed in Kazakhstan

Printed in Brazil

:5. Language

:6. Number of pages

:Model name

:Suffix

:Brand name

:Product name

:1. Trim size (Format)

2. Printing colors

4 3 2

Front Back (Eng)

P/No. … … … … … 23

Pagination sheet

OWNER’S MANUAL

Safety and Reference

LED TV*

*Disclaimer

LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

MT47* MT48* MT57*

*MFL68783002*

www.lg.com

P/NO : MFL68783002(1506-REV02)

Printed in Indonesia

India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.)

ATTENTION:

This product is qualified for the BEE Star rating in the ‘Home’ Mode. The Objectives of Star Labeling Program is designed to promote energy efficient products and prac tices. When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.

• Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.

• Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the

stated energy consumption.

To reset the television to Star rating qualified settings, select ‘Home’ mode from the initial set-up procedure in ‘factory settings’ under the ‘Set-up’ menu.

ENGENGLISH

Table of contents

4 Safety precautions

6 Licenses

6 Open source software notice information

6 Preparing

7 Lifting and moving the TV

7 Setting up the TV

7 Using the joystick button

7 Basic functions 7 Adjusting the menu

8 Using the buttons

8 Mounting on a table

8 Using the kensington security system

8 Mounting on a wall

9 Connections (Notifications)

9 Antenna connection 9 Other connections

10 Remote control

10 Watching TV

12 Entertainment

17 Customizing TV setting

19 Teletext

20 Maintenance

20 Cleaning your TV 20 Preventing “Image burn” or “Burn-in” on your TV screen

20 Troubleshooting

21 Specifications

23 Environmental information

Service

Unplug the monitor from the wall outlet and refer servicing to qualified service personnel when :

• The power cord or plug is damaged or frayed.

• Liquid has been spilled into the monitor.

• The monitor has been exposed to rain or water.

• The monitor does not operate normally following the operating

instructions. Adjust only those controls that are covered in the operating instructions. An improper adjustment of other controls may result in damage and often requires extensive work by a qualified technician to restore the monitor to normal operation.

• The monitor has been dropped or the cabinet has been damaged.

• The monitor exhibits a distinct change in performance.

• Snapping or popping from the monitor is continuous or frequent

while the monitor is operating. It is normal for some monitors to make occasional sounds when being turned on or off, or when changing video modes.

Do not attempt to service the monitor yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

ENG

ENGLISH

Safety precautions

Please read these safety precautions carefully before using the product.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

Precautions in installing the Product

WARNING

• Keep away from heat sources like elec trical heaters.

Electrical shock, fire, malfunction or deformation may occur.

►

• Keep the packing anti-moisture material or vinyl packing out of the

reach of children.

Anti-moisture material is harmful if swallowed. If swallowed by

►

mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

• Do not put heavy objects on the product or sit upon it.

If the product collapses or is dropped, you may be injured. Children

►

must pay particular attention.

• Do not leave the power or signal cable unattended on the pathway.

The passerby can falter, which can cause electrical shock, fire, product

►

breakdown or injury.

• Install the product in a neat and dry place.

Dust or moisture can cause electrical shock, fire or product damage.

►

• If you can smell smoke or other odors or hear a strange sound unplug

the power cord and contact the service center.

If you continue to use without taking proper measures, electrical

►

shock or fire can occur.

• If you dropped the product or the case is broken, turn off the product

and unplug the power cord.

► If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.

• Do not drop an object on or apply impact to the product. Do not throw

any toys or objects on the product screen.

It can cause injury to human, problem to product and damage the

►

display.

• Do not let the product fall or drop when connecting it with an external

device.

This may cause injury and/or damage to the product.

►

• When connecting it with a game device, keep a distance of four times as

long as the diagonal measurement of the screen from the device.

If the product falls because of the short cable, this may cause injury

►

and/or damage to the product.

• Leaving a fixed image on the screen for a long time may cause damage

to the screen and cause image burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize the residual image prevention function on the product, and when the product is not used, turn off the power. Burn-in and related problems are not covered by the warranty on this product.

• Do NOT install this product on a wall where there is high risk of

exposure to oil fumes or mist.

This may damage product and cause is to fail.

►

CAUTION

• Make sure the product ventilation hole is not blocked. Install the

product in a suitably wide place (more than 10 cm from the wall)

If you install the product too close to the wall, it may be deformed

►

or fire can break out due to internal heat.

• Do not block the ventilation hole of the product by a tablecloth or

curtain.

The product can be deformed or fire can break out due to

►

overheating inside the product.

• Install the product on a flat and stable place that has no risk of

dropping the product.

If the product is dropped, you may be injured or the product may

►

be broken.

• Install the product where no EMI occurs.

• Keep the product away from direct sunlight.

The product can be damaged.

►

• If you install the product in a place that does not meet the

recommended conditions, this may cause serious damage to the product’s picture quality, life cycle and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station), failure to do so will invalidate the warranty.

• Do not install the product in an area with poor ventilation (e.g.on a

bookshelf, in a closet) or outside and avoid placing on cushions or carpets.

• In addition, do not install it where there are heating objects such as

lighting equipment.

Precautions to the AC Adapter and Electrical Power

WARNING

• If water or any foreign substance goes inside the product (TV,

monitor, power cord, or AC adapter), disconnect the power cord immediately and contact the service center.

Otherwise, this may cause a fire or electric shock due to damage

►

to the product.

• Do not touch the power plug or AC adapter with wet hands. If the

pins of the plug are wet or dusty, wipe and dry them before use.

Otherwise, this may cause a fire or electric shock.

►

• Make sure to completely insert the power cord into the AC adapter.

If loosely connected, the poor connection may cause a fire or

►

electric shock.

• Be sure to use power cords and AC adapters provided or approved by

LG Electronics, Inc.

The use of non-approved products may cause a fire or electric

►

shock.

ENGENGLISH

• When unplugging the power cord, always pull it by the plug. Do not

bend the power cord with excessive force.

The power line can be damaged, which may cause electric shock

►

or fire.

• Be careful not to step or place heavy objects (electronic appliances,

clothing, etc.) on the power cord or AC adapter. Be careful not to damage the power cord or AC adapter with sharp objects.

Damaged power cords may cause a fire or electric shock.

►

• Never disassemble, repair or modify the power cord or AC adapter.

This may cause a fire or electric shock.

►

• Make sure to connect the power cable to the grounded current.

You may be electrocuted or injured.

►

• Use the rated voltage only.

The product can be damaged, or you may be electrocuted.

►

• In the presence of thunder and lightning, never touch the power cord

and signal cable because it can be very dangerous.

It can cause electric shock.

►

• Do not connect several extension cords, electrical appliances

or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.

A fire can break out due to overheating.

►

• Do not touch the power plug with wet hands. Additionally, if the

cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

►

• If you don’t intend to use the product for a long time, unplug the

power cable from the product.

Covering dust can cause a fire, or insulation deterioration can

►

cause electric leakage, electric shock or fire.

• Fix the power cable completely.

If the power cable is not fixed completely, a fire can break out.

►

• Do not insert a conductor (like a metal chopstick) into one end of the

power cable while the other end is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.

You may be electrocuted.

►

• The appliance coupler is used as the disconnect device.

• Please make sure the device is installed near the wall outlet to which

it is connected and that the outlet is easily accessible.

• As long as this unit is connected to the AC wall outlet, it is not

disconnected from the AC power source even if the unit is turned off.

CAUTION

• Be sure to keep the outlet, AC adapter, and pins of the power plug

clean from dust and etc.

This may cause a fire.

►

• Do not unplug the power cord while the product is in use.

Electrical shock can damage the product.

►

• Use only the power cord supplied with the unit. If you use another

power cord, make sure that it is certified by the applicable national standards when not provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.

Precautions in moving the product

WARNING

• Make sure to turn off the product.

You may be electrocuted or the product can be damaged.

►

• Make sure to remove all cables before moving the product.

You may be electrocuted or the product can be damaged.

►

• Make sure the panel faces forward and hold it with both hands to

move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair.

• Make sure the product is turned off, unplugged and all cables

have been removed. It may take 2 or more people to carr y larger apparatus. Do not press against or put stress on the front panel of the apparatus.

CAUTION

• Do not shock the product when moving it.

You may be electrocuted or the product can be damaged.

►

• Do not dispose the product-packing box. Use it when you move.

Precautions in using the product

WARNING

• Do not disassemble, repair or modify the product at your own

discretion.

Fire or electric shock accident can occur.

►

Contact the service center for check, calibration or repair.

►

• When the display is to be left unattended for an extended period of

time, unplug it from the wall outlet.

• Keep the product away from water.

Fire or electric shock accident can occur.

►

• Do not shock or scratch the front and sides of the screen with metallic

objects.

Otherwise, it may cause damage to the screen.

►

• Avoid high temperatures and humidity.

CAUTION

• Do not put or store inflammable substances near the product.

There is a danger of explosion or fire due to careless handling of

►

the inflammable substances.

• When cleaning the product, unplug the power cord and scrub gently

with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol)

• Take a rest from time to time to protect your vision.

• Keep the product clean at all times.

• Take a comfortable and natural position when working with a

product to relax the muscles.

• Take a regular break when working with a product for a long time.

• Do not press strongly upon the panel with a hand or sharp object

such as nail, pencil or pen, or make a scratch on it.

• Keep the proper distance from the product.

Your vision may be impaired if you look at the product too closely.

►

• Set the appropriate resolution and clock by referring to the User’s

Guide.

Your vision can be impaired.

►

ENG

ENGLISH

• Use authorized detergent only when cleaning the product. (Do not

use benzene, thinner or alcohol.)

Product can be deformed.

►

• Do not expose to dripping or splashing and do not place objects

filled with liquids, such as vases, cups, etc. on or over the apparatus(e.g. on shelves above the unit).

• Batteries should not be exposed to excessive heat. For example,

keep away from direct sunlight, open fireplace and electric heaters.

• Do NOT place non-rechargeable batteries in charging device.

• Using headsets (earphones) for a long time or listening loudly can

cause damage to your hearing.

• Spray water onto a soft cloth 2 to 4 times, and use it to clean the

front frame; wipe in one direction only. Too much moisture may cause staining.

• Do not use products using high voltage around the Monitor. (ex.

Electrical Swatter)

Monitor may have malfunction as its electrical shock.

►

Mounting on a wall

• Do not install this product by yourself. Contact the service

technician qualified by the Manufacturer. It may cause injuries.

Licenses

Supported licenses may differ by model. For more information about licenses, visit

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod.divx. com. Find your registration code in the DivX VOD section of your device setup menu. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.

www.lg.com

Open source software notice information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

Preparing

NOTE

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ slightly from that

shown in this manual.

• The available menus and options may differ from the input source

or product model that you are using.

• New features may be added to this TV in the future.

• The TV can be placed in standby mode in order to reduce the

power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.

• The energy consumed during use can be significantly reduced

if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

• The items supplied with your product may vary depending on the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width.

• Use an extension cable that supports USB 2.0 if the USB cable or

USB memory stick does not fit into your TV’s USB port.

*A 10 mm *B 18 mm

• Use a certified cable with the HDMI logo attached. If you do

not use a certified HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI cable types

- High-Speed HDMI®/™ cable

- High-Speed HDMI®/™ cable with Ethernet

CAUTION

• Do not use any unapproved items to ensure the safety and product

lifespan of the product.

• Any damages or injuries by using unapproved items are not

covered by the manufacturer’s warranty.

• Some models have a thin film attached on to the screen and this

must not be removed.

+ 18 hidden pages