LG 21FD1RG, 21FJ4AB Owner’s Manual

Colour Television

OWNER’S MANUAL

Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.

Model number : Serial number :

Contents

Installation.........................................................2

Connection of external equipment..................3

Location and function of controls...................4

Basic operation.................................................8

On screen menus..............................................8

Setting up TV stations......................................9

Picture adjustment..........................................12

Sound adjustment...........................................13

Time setting.....................................................14

Other functions...............................................15

Troubleshooting check list............................17

Power

This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.

Warning

To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not place anything containing liquid on top of the set, this may cause a fire or could give an electric shock.

Service

Never remove the back cover of the set as this can expose you to very high voltage and other hazards. If the set does not operate properly, unplug it and call your dealer.

Aerial

Connect the aerial cable to the socket marked

+75 Ω on the back cover. For the best reception

an outdoor aerial should be used.

Location

Position your set so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.

Installation

You can connect additional equipment, such as VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set.

Aerial socket

1. Connect the RF out socket of the VCR to the aerial socket on the back of the set.

2. Connect the aerial cable to the RF aerial in socket of the VCR.

3. Store the VCR channel on the programme number 0 using the ‘Manual programme tuning’ section.

4. Select the programme number where the VCR channel is stored.

5. Press the PLAY button on the VCR.

Audio/Video in/out sockets (option)

1. Connect the audio/video out sockets of the VCR to audio/video in sockets of the set and in sockets of the VCR to out sockets of the set.

2. If the VCR is connected to the AV sockets on the set, press the TV/AV button to select

(or AV 1 )

AV 2.

3. Press the PLAY button on the VCR. The VCR playback picture appears on the screen.

You can also record programmes received by the TV on video tape via audio/video out sockets.

Note : If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO socket of the set.

Euro scart socket (option)

1. Connect the Euro scart socket of the VCR to the Euro scart socket of the set.

2. Press the PLAY button on the VCR. If your VCR outputs a switching voltage when connected to Euro scart socket, the set will switch to

AV (or AV 1 )

mode automatically. But if you want to keep on watching TV mode, press the

DD / EE

or NUMBER buttons.

Otherwise press the TV/AV button on the remote control handset to select

AV (or AV 1 )

. The VCR playback picture appears on the screen.

You can also record programmes received by the TV on video tape.

Note : Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo CD unit, etc.

S-video / Audio in sockets (S-AV) (option)

When connecting the S-video socket of the VCR to the S-VIDEO socket of the set, the picture quality will be further improved.

1. Connect the S-video socket of the VCR to the S-VIDEO socket of the set.

2. Connect the audio cable from the VCR to the AUDIO sockets of the set.

3. Select

AV 3 by pressing the TV/AV button

repeatedly.

4. Press the PLAY button on the VCR. The VCR playback picture appears on the screen.

Note : If both S-VIDEO and VIDEO sockets have been connected to the VCR simultaneously, only the S-VIDEO can be received.

Component in sockets (option)

1. Connect the COMPONENT video output sockets (Y Cb Cr, Y Pb Pr or Y B-Y R-Y) of the DVD player to the COMPONENT INPUT sockets (Y PB PR) on the set.

2. Connect the audio cable from the DVD player to AUDIO IN sockets of

AV (or AV1 )

3. Press the TV/AV button to select COMPO-

NENT

4. Press the PLAY button on the DVD player. The COMPONENT playback picture appears on the screen.

Headphone socket (option)

Only models which have a headphone socket can perform this function. Insert the headphone plug to the headphone socket of the set. You can listen to the sound through the headphones. To adjust the headphone volume, press the F / G button.

If you press the MUTE button, the sound from the headphone’s is switched off.

Connection of external equipment

All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set.

Remote control handset

Before you use the remote control handset, please install the batteries. See the next page.

1. POWER

switches the set on from standby or off to standby.

2. NUMBER BUTTONS

switches the set on from standby or directly select a number.

3. MENU

selects a menu.

4. EYE/

(option)

switches the eye function on or off.

(Programme Up/Down)

selects a programme or a menu item. switches the set on from standby. scans programmes automatically.

FF / GG

(Volume Up/Down)

adjusts the volume. adjusts menu settings.

accepts your selection or displays the current mode.

6. Q.VIEW

returns to the previously viewed programme.

7. PSM (Picture Status Memory)

recalls your preferred picture setting.

8. FAVOURITE

selects a favorite programme.

9. TURBO PICTURE / SOUND BUTTON (option)

selects Turbo picture and sound.

Location and function of controls

( )

POWER MUTE

123

456

789

TV/AV

EYE/

Q.VIEW

LIST

I / II /

( )

VOLVOL

PSM SSM/ SLEEP

PICTURE SOUND

TURBO/

FAVOURITE

Location and function of controls

10. MUTE

switches the sound on or off.

11. TV/AV

selects TV or AV mode. switches the set on from standby.

12. I/II/*(option)

selects the language during dual language broadcast. (option) selects the sound output.

13. LIST

displays the programme table.

14. SLEEP

sets the sleep timer.

15. SSM/*(Sound Status Memory) (option)

recalls your preferred sound setting.

16. SURROUND (ºº/*) (option)

selects surround sound.

: No function

COLOURED BUTTONS : These buttons are used for teletext (only

TELETEXT models) or programme edit.

Battery installation

The remote control handset is powered by two AAA type batteries. To load the batteries, turn the remote control handset over and open the battery compartment. Install two batteries as indicated by the polarity symbols ( and ) marked inside the compartment.

Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time.

POWER MUTE

123

456

789

TV/AV

EYE/

Q.VIEW

LIST

I / II /

( )

VOLVOL

PSM SSM/ SLEEP

PICTURE SOUND

TURBO/

FAVOURITE

Location and function of controls

Front panel

VIDEO

L/MONO

AUDIO

AV2

VIDEO

L/MONO

AUDIO

21FB3 series

1 2 3 4 7 765 6

1 2 3 4 85

21FX4 series

21FD1/4 series

MENU OK

VOL

1 2 3 4 5

VIDEO AUDIO

17/21FB7 series

2 3 4 5

VIDEO

L/MONO

AUDIO

AV2

ON/OFF

VOL PR

VIDEO

AUDIO

21FB5 series

2 3 4 75

17/21FX5 series

2 3 54

21FB2 series

VIDEO

L/MONO

RAUDIO

AV2

21FX6 series

1 4 5

3 8

15/21FC2 series

4 53

VOL

ON/OFF

VOL

21FC9/21FD6

series

21FG1 series

4 53

21FJ4 series

ON/OFF

MENUOKVOL

VIDEO AUDIO

L/MONO

ON/OFF

MENU OK

VOL PR

VIDEO AUDIO

AV3

ON/OFF

OK VOL

+ 12 hidden pages