LG Electronics 19LD350C, 22LD350C User Manual

Download

OWNER’S MANUAL

LCD TV

Please read this manual carefully before operating your set and retain it for future reference.

19LD350 22LD350 26LD350 32LD350 19LD350C 22LD350C 32LD320

P/NO : SAC34134202 (1004-REV02)

Downloaded From TV-Manual.com Manuals

www.lg.com

WARNING / CAUTION

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

WARNING / CAUTION

To prevent fire or shock hazards, do not expose this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device).

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

Downloaded From TV-Manual.com Manuals

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Unplug this apparatus during lighting storms or when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Downloaded From TV-Manual.com Manuals

SAFETY INSTRUCTIONS

Never touch this apparatus or antenna during a thunder or lighting storm.

When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV.

Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.

CAUTION concerning the Power Cord: It is recommend that appliances be placed

upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning.

Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

GGRROOUUNN DD IINN GG

Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS

Mains plug is the disconnecting device. The plug must remain readily operable.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

Power Supply

Short-circuit

Breaker

Downloaded From TV-Manual.com Manuals

AANN TT EENN NNAASS OOuuttddoo oorr aanntteennnn aa gg rroouunn ddii nngg

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.

Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

AAnntteennnnaa ggrroouunnddiinngg aaccccoorrddiinngg ttoo tthhee NNaattiioonnaall EElleeccttrriiccaall CCooddee,, AANNSSII//NNFFPPAA 7700

CC llee aannii nn gg

When cleaning, unplug the power cord and rub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene.

MMoovv iinngg

Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV.

VVeennttiill aattiioonn

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in excessively dusty places.

Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center.

Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it.

Keep the product away from direct sunlight.

FF oorr LLCCDD TT VV

If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.

Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.

Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Antenna Lead in Wire

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductor (NEC Section 810-21)

Ground Clamps

Power Service Grounding Electrode System (NEC Art 250, Part H)

Ground Clamp

Electric Service

Equipment

NEC: National Electrical Code

ON DISPOSAL

(Only Hg lamp used LCD TV)

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.

Downloaded From TV-Manual.com Manuals

WARNING / CAUTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SAFETY INSTRUCTIONS

. . . . . . . . . . . . . . . . . . . . . . . . . . 3

FEATURE OF THIS TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PREPARATION

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Stand Instructions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Cable Management

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Desktop Pedestal Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Swivel Stand

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Positioning your Display

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Attaching the TV to a Desk

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Kensington Security System

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Securing the TV to the wall to prevent falling when the TV is used on a stand

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 23

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

DVD Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

VCR Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Other A/V Source Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

USB Connection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Audio out Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Headphone Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

WATCHING TV / CHANNEL CONTROL

Remote Control Functions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Turning On the TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Channel Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Initial Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

On-Screen Menus Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Quick Menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Channel Setup

- Auto Scan (Auto Tuning)

. . . . . . . . . . . . . . . . . . . . . . . . . . . 45

- Add / Delete Channel (Manual Tuning)

. . . . . .

- Channel Editing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Favorite Channel Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Favorite Channel List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Brief Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Input List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

AV Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Simple Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Key Lock

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SIMPLINK

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

USB

Entry Modes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Photo List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Music List

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

PICTURE CONTROL

Picture Size (Aspect Ratio) Control

. . . . . . . . . . . . . . . . . .

Picture Wizard

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Preset Picture Settings (Picture Mode)

. . . . . . . . . . . . .

Manual Picture Adjustment - User Mode

. . . . . . . . . . 71

Picture Improvement Technology

. . . . . . . . . . . . . . . . . . . . . 72

Expert Picture Control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Energy Saving

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Picture Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Power Indicator

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Demo Mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 79

Clear Voice II

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Preset Sound Setting (Sound Mode)

. . . . . . . . . . . . . . . . 81

Sound Setting Adjustment - User Mode

. . . . . . . . . . .82

Infinite Sound

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Balance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

TV Speakers On/Off Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Audio Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Stereo/SAP Broadcasts Setup

. . . . . . . . . . . . . . . . . . . . . . . . . .

Audio Language

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

On-Screen Menus Language Selection

. . . . . . . . . . . . . 89

Caption Mode

- Analog Broadcasting System Captions

. . . . . . . 90

- Digital Broadcasting System Captions

. . . . . . . . 91

- Caption Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TIME SETTING

Clock Setting

- Auto Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Auto On/Off Time Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sleep Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PARENTAL CONTROL / RATINGS

Set Password & Lock System

. . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Channel Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 0

Movie & TV Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

101

Downloadable Rating

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 6

External Input Blocking

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 7

APPENDIX

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 8

Maintenance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

111

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

112

IR Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

External Control Through RS-232C

. . . . . . . . . . . . . . . . .114

Open Source License

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12 0

Downloaded From TV-Manual.com Manuals

FEATURE OF THIS TV

The AV Mode optimizes the picture into Cinema, Sports, and game Mode according to the video and audio content. The viewer has the ability to quickly choose the correct mode for the picture they are viewing.

Automatically enhances and amplifies the sound of human voice frequency range to help keep dialogue audible when background noise swells.

LG TV include a unique invisible speaker system, tuned by renowned audio expert, Mr. Mark Levinson. Speakers are embedded in strategic spots behind the front cabinet and use minute vibrations to turn the entire front bezel into the speaker system. The result is a clean, polished look, and enhanced audio by increasing the “sweet spot”, giving a wider and richer sound field.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

Manufactured under license from Dolby Laboratories. “

Dolby

“and the double-D symbol are trademarks of

Dolby Laboratories.

This TV contains the detailed calibrations necessary for professional certification by the Imaging Science Foundation. The resulting ISF “day” and “night” modes will then be accessible by the user to experience the best their LG HDTV has to offer. CALIBRATE LIKE A PRO: Sophisticated and detailed calibrations can be made through the ISFccc mode. Detailed calibration requires a licensed technician. Please contact your local dealer to inquire about an ISF certified technician.

High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080p, 1080i, and 720p resolutions.

■

When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV

for an extended period, it can become permanently imprinted on the screen. This phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.

■

In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period

(2 or more hours for LCD, 1 or more hours for Plasma).

■

Image burn can also occur on the letterboxed

areas of your TV if you use the 4:3 aspect ratio setting for an extended period.

IMPORTANT INFORMATION TO PREVENT “IMAGE BURN / BURN-IN” ON YOUR TV SCREEN

Downloaded From TV-Manual.com Manuals

PREPARATION

ACCESSORIES

PREPARATION

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

The accessories included may differ from the images below.

1.5V 1.5V

Owner’s Manual Power Cord

Remote Control,

Batteries (AAA)

E N

E R

G Y

123

789

P A

A V

I N G

A V

O D E

I N

P U

A V

A T

I O

U T

T E

A R

L IS

L A

S H

B K

N U

I N F

Q . M

N U

B A

C K

E X

I T

CD Manual

FFoorr 1199//2222LLDD335500,, 1199//2222LLDD335500CC

Cable Holder

(Refer to P.19)

FFoorr 2266//3322LLDD335500

(M4x20)

Screws for stand

assembly(Refer to P.16)

Screw for stand fixing

(Refer to P.21)

Protection Cover

(Refer to P.17)

Protection Cover

(Refer to P.14)

x 8

OOppttiioonn EExxttrraass

* Wipe spots on the exterior only with

the polishing cloth.

* Do not wipe roughly when removing

stains. Excessive pressure may cause scratches or discoloration.

Polishing Cloth

Not included with all models

D-sub 15 pin Cable

When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain standards compliance.

FFoorr 3322LLDD332200

(M4x24)

Screws for stand assembly

(Refer to P.15)

Screw for stand fixing

(Refer to P.21)

Protection Cover

(Refer to P.15)

x 4

Downloaded From TV-Manual.com Manuals

PREPARATION

FRONT PANEL INFORMATION

PREPARATION

■

Image shown may differ from your TV.

CHANNEL ( , ) Buttons

VOLUME (-, +) Buttons

ENTER Button

19/22LD350, 19/22LD350C

MENU Button

POWER Button

INPUT Button

SPEAKER

Power/Standby Indicator

Illuminates red in standby mode. Illuminates blue when the TV is switched on.

Remote Control Sensor

CHANNEL ( , ) Buttons

VOLUME (+, -) Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

26/32LD350

INPUT

ENTER

VOL

Downloaded From TV-Manual.com Manuals

ENTER

INPUT

32LD320

CHANNEL (DD,EE) Buttons

VOLUME (+, -) Buttons

ENTER Button

MENU Button

INPUT Button

POWER Button

SPEAKER

Remote Control Sensor, Power/Standby Indicator

Illuminates red in standby mode. Illuminates blue when the TV is switched on.

VOL

ENTER

INPUT

Downloaded From TV-Manual.com Manuals

PREPARATION

BACK PANEL INFORMATION

PREPARATION

AC-IN

RS-232C IN

(

CONTROL&SERVICE)

ANTENNA/

CABLE IN

VIDEO

YPB PR

L R

AUDIO

RGB IN (PC)

/DVI IN

AV IN

VIDEO

AUDIO

L/MONO

COMPONENT IN

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN (RGB/DVI)

1 4

19/22LD350, 19/22LD350C

7 6

■

Image shown may differ from your TV.

USB IN

SERVICE ONLY

H/P

2 3 5

IN 2

VIDEO

AUDIO

L/MONO

H/P

USB IN

SERVICE ONLY

AV IN 2

/DVI IN

RS-232C IN

(

CONTROL&SERVICE)

ANTENNA /CABLE IN

VIDEO

YPB PR

L R

AUDIO

RGB IN (PC)

VIDEO

AUDIO

L/MONO

COMPONENT IN

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN (RGB/DVI)

AV IN 1

1 4

26LD350

7 6

2 3 5

Downloaded From TV-Manual.com Manuals

PREPARATION

■

Image shown may differ from your TV.

AC IN

/DVI IN

RS-232C IN

(

CONTROL&SERVICE)

ANTENNA /CABLE IN

VIDEO

YPB PR

L R

AUDIO

RGB IN (PC)

VIDEO

AUDIO

L/MONO

COMPONENT IN

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN (RGB/DVI)

AV IN 1

1 4

32LD350, 32LD320

7 6

2 3 5

HDMI/DVI IN, HDMI IN

Digital Connection. Supports HD video and Digital audio. Doesn’t

support 480i. Accepts DVI video using an adapter or HDMI to

DVI cable (not included).

RGB IN (PC)

Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable).

AUDIO IN (RGB/DVI)

1/8" (0.32 cm) headphone jack for analog PC audio input.

OPTICAL DIGITAL AUDIO OUT

Digital optical audio output for use with amps and home theater systems.

Note: In standby mode, this port doesn’t work.

RS-232C IN (CONTROL & SERVICE) PORT

Used by third party devices. This port is used for Service or Hotel mode.

AV (Audio/Video) IN

Analog composite connection. Supports standard definition video only (480i).

ANTENNA/CABLE IN

Connect over-the air signals to this jack. Connect cable signals to this jack.

COMPONENT IN

Analog Connection. Supports HD. Uses a red, green, and blue cable for video & red

and white for audio.

USB IN SERVICE ONLY

Used for software updates.

HEADPHONE INPUT

0.32 cm (1/8 inch) headphone jack impedance 16

Ω, Maximum audio out 15 mW

USB IN

Used for viewing photos and listening to MP3s.

Power Cord Socket

For operation with AC power. Caution: Never attempt to operate the TV on DC

power.

Downloaded From TV-Manual.com Manuals

IN 2

H/P USB IN

AUDIO

L/MONO

VIDEO

AV IN 2

PREPARATION

STAND INSTRUCTIONS (For 19/22LD350, 19/22LD350C)

PREPARATION

■

Image shown may differ from your TV.

PROTECTION COVER

After removing the stand, install the included pp rrootteeccttiioonn ccoo vv eerr

over the hole for the stand. After removing the protection paper from the protection cover, adhere it to the TV as shown.

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the TV as shown until you hear it click.

INSTALLATION

DETACHMENT

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Remove the screws from the TV.

Detach the stand from TV.

PPRROOTTEECCTTIIOONN CC OO VV EERR

Downloaded From TV-Manual.com Manuals

PREPARATION

STAND INSTRUCTIONS (For 32LD320)

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the TV as shown.

Fix the 4 screws securely using the holes in the back of the TV.

INSTALLATION

When assembling the desk type stand, make sure the screw is fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten.

NOTE

DETACHMENT

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Loose the screws from TV.

Detach the stand from TV.

After removing the stand, install the included

pp rroottee cc--

ttiioonn cc oovvee rr

over the hole for the stand.

Press the

PPRROOTT EECC TTIIOONN CC OOVVEERR

into the TV until

you hear it click.

PROTECTION COVER

(M4x24)

Downloaded From TV-Manual.com Manuals

PREPARATION

STAND INSTRUCTIONS (For 26/32LD350)

PREPARATION

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the parts of the

SS TT AANNDD BBOODDYY

with

CCOOVVEERR BBAASSEE

of the TV by using the 4

screws supplied.

Fix the 4 screws securely using the holes in the back of the TV.

Assemble the TV as shown.

INSTALLATION

When assembling the desk type stand, make sure the screws are fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten.

NOTE

■

Image shown may differ from your TV.

CCOOVVEERR BBAASSEE

SS TT AANNDD BB OO DD YY

(M4x20)

Downloaded From TV-Manual.com Manuals

PREPARATION

DETACHMENT

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Remove the screws from the TV.

Detach the stand from TV.

After removing the stand, install the included pp rrootteeccttiioonn cc oovveerr

over the hole for the stand.

Press the

PPRROOTT EECC TTIIOONN CCOOVVEE RR

into the TV

until you hear it click.

PROTECTION COVER

Downloaded From TV-Manual.com Manuals

PREPARATION

VESA WALL MOUNTING

PREPARATION

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.

Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.

CAUTION

Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount.

Standard dimensions for wall mount kits are shown in the table.

When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

Do not use screws longer then the standard dimension, as they may cause damage to the inside to the TV.

For wall mounts that do not comply with the VESA

standard screw specifications, the length of the screws may differ depending on their specifications.

Do not use screws that do not comply with the VESA standard screw specifications.

Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents.

LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installation instructions.

NOTE

Model

VESA (A *B)

Standard Screw Quantity

Wall Mounting Bracket

(sold separately)

19LD350,

19LD350C,

22LD350,

22LD350C

26LD350, 32LD350,

32LD320

10 0* 10 0 M 4 4

200* 10 0 M 4 4

LSW100B, LSW100BG

Downloaded From TV-Manual.com Manuals

PREPARATION

CABLE MANAGEMENT

For 19/22LD350, 19/22LD350C

After connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.

AC-IN

■

Image shown may differ from your TV.

For 26/32LD350, 32LD320

AC IN

Connect the cables as necessary. To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

Open the CABLE MANAGEMENT CLIP as shown.

CABLE MANAGEMENT CLIP

Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.

Downloaded From TV-Manual.com Manuals

PREPARATION

DESKTOP PEDESTAL INSTALLATION

PREPARATION

For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.

■

Image shown may differ from your TV.

4 inches

Ensure adequate ventilation by following the clearance recommendations.

Do not mount near or above any type of heat source.

CAUTION

4 inches

SWIVEL STAND (Except 19/22LD350, 19/22LD350C)

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

POSITIONING YOUR DISPLAY (For 19/22LD350, 19/22LD350C)

■

Here shown may be somewhat different from your TV.

■

Adjust the position of the panel in various ways for maximum comfort.

• Tilt range

Downloaded From TV-Manual.com Manuals

PREPARATION

ATTACHING THE TV TO A DESK (Except 19/22LD350, 19/22LD350C)

The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

WARNING

1-Screw

(provided as parts of the product)

Desk

Stand

KENSINGTON SECURITY SYSTEM

■

This feature is not available for all models.

- The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.

- For the detailed installation and use of the Kensington Security

System, refer to the user’s guide provided with the Kensington Security System.

For further information, contact

hhttttpp :://// wwwwww.. kk eenn ssiinn gg tt oonn.. ccoo mm

, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors.

NOTE: The Kensington Security System is an optional accessory.

Downloaded From TV-Manual.com Manuals

PREPARATION

SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND

PREPARATION

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction,

potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV.

■

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

■

Use a sturdy rope (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

■

You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).

■

Image shown may differ from your TV.

Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.

To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.

NOTE

Downloaded From TV-Manual.com Manuals

PREPARATION

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.

For optimum picture quality, adjust antenna direction if needed.

2. Cable

Wa ll Antenna Socket

Outdoor Antenna (VHF, UHF)

Cable TV Wall Jack

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

Be careful not to bend the copper wire when connecting the antenna.

Copper Wire

■

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

■

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

■

If the antenna is not installed properly, contact your dealer for assistance.

ANTENNA /CABLE IN

■

To prevent damage do not connect to the power outlet until all connections are made between the devices.

■

Image shown may differ from your TV.

ANTENNA /CABLE IN

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device.

Component Connection

1. How to connect

Connect the video outputs (Y, P

, PR

)

of the digital set-

top box to the

CC OO MMPP OO NNEENNTT II NN VVII DDEEOO

jacks on

the TV. Match the jack colors (Y = green, P

= blue, and

R = red).

Connect the audio output of the digital set-top box to the

CC OO MMPP OO NNEENNTT IINN AAUUDDIIOO

jacks on the TV.

2. How to use

■

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box operation.

)

■

Select the

CC oomm ppoonnee nn tt

input source on the TV using the

II NNPPUUTT

button on the remote control.

■

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

■

This part of EXTERNAL EQUIPMENT SETUP mainly use picture for

3322LLDD3355 00

RS-232C IN

(

CONTROL&SERVICE)

ANTENNA /CABLE IN

VIDEO

AUDIO

L/MONO

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN (RGB/DVI)

AV IN 1

VIDEO

YPB PR

L R

AUDIO

COMPONENT IN

Y L RPB PR

Y, C

, C

R/P

Supported Resolutions

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

15.73 59.94

15.73 60.00

31.47 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.94

67.50 60.00

Resolution

720x480i

720x480p

1280x720p

1920x1080i

1920x1080p

Signal

480i

480p

720p

10 8 0 i

10 8 0 p

Component

Yes

HDMI

Yes

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

HDMI Connection

Connect the digital set-top box to the

HHDDMMII// DD VV II

II NN

HHDDMMII// DDVVII II NN 11//22

* jack on the TV.

No separate audio connection is necessary. HDMI supports both audio and video.

1. How to connect

2. How to use

■

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box.

)

■

Select the

HHDDMMIIorHHDDMMII11//22

* input source on the TV

using the

IINNPPUUTT

button on the remote control.

RS-232C IN

(

CONTROL&SERV

VIDEO

YPB PR

AUDIO

RGB IN (PC)

VIDEO

AUD

L/MONO

COMPONENT IN

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN

(RGB/DVI)

/DVI IN

HDMI OUTPUT

HDMI-DTV

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.47 59.94

31.50 60.00

44.96 59.94

45.00 60.00

33.72 59.94

33.75 60.00

26.97 23.976

27.00 24.00

33.71 29.97

33.75 30.00

67.432 59.94

67.50 60.00

Resolution

720x480p

1280x720p

1920x1080i

1920x1080p

* HDMI 2: For 26/32LD350, 32LD320

If an HDMI cables doesn’t support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.

HDMI Audio Supported Format: AC3 (32 KHz, 44.1 KHz, 48 KHz), Linear PCM (32 KHz, 44.1 KHz, 48 KHz)

NOTE

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

DVI to HDMI Connection

RS-232C IN

(

CONTROL&SERVICE)

VIDEO

YPB PR

L R

AUDIO

RGB IN (PC)

VIDEO

AUDIO

L/MONO

COMPONENT IN

OPTICAL DIGITAL

AUDIO OUT

AV IN 1

/DVI IN

AUDIO IN (RGB/DVI)

L R

DVI OUTPUT

AUDIO

A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio connection is necessary.

NOTE

Connect the DVI output of the digital set-top box to the

HHDDMMII// DD VV II IINN

HHDDMMII// DDVVII IINN 11

jack on the

TV.

Connect the digital set-top box audio output to the AAUUDDIIOO IINN ((RRGGBB// DDVVII ))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the digital set-top box. (

Refer to the owner’s manual for the digital set-top box.

)

■

Select the

HHDDMMIIorHHDDMMII11

input source on the TV using

the

IINNPPUUTT

button on the remote control.

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

DVD SETUP

Component Connection

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

YPB PR

Video output ports

on DVD player

B-Y

R-Y

1 2

Connect the video outputs (Y, PB

, P

)

of the DVD to

the

CCOOMMPPOONNEENN TT IINN VVIIDDEEOO

jacks on the TV. Match

the jack colors (Y = green, P

= blue, and PR = red

)

Connect the audio outputs of the DVD to the CC OO MMPP OO NNEENNTT II NN AA UU DDII OO

jacks on the TV.

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select the

CC oomm ppoonnee nn tt

input source on the TV using the

II NNPPUUTT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

Y L RPB PR

RS-232C IN

(

CONTROL&SERVICE)

OPTICAL DIGITAL

(PC)

AUDIO IN (RGB/DVI)

YPB PR

AUDIO OUT

VIDEO

COMPONENT IN

L/MONO

AUDIO

L R

AUDIO

AV IN 1

ANTENNA /CABLE IN

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

Composite (RCA) Connection

RS-232C IN

(

CONTROL&SERVICE)

ANTENNA /CABLE IN

VIDEO

YPB PR

L R

AUDIO

COMPONENT IN

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN (RGB/DVI)

VIDEO

AUDIO

L/MONO

AV IN 1

L R

VIDEO

AUDIO

HDMI Connection

RS-232C I

(

CONTROL&SER

VIDEO

YPB PR

AUD

RGB IN (PC)

VIDEO

L/MONO

COMPONENT IN

OPTICAL DIGITAL

AUDIO OUT

AUDIO IN (RGB/DVI)

/DVI IN

HDMI OUTPUT

Connect the

AAUUDDII OO/VVII DD EE OO

jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

1. How to connect

2. How to use

■

Turn on the DVD player, insert a DVD.

■

Select the

AA VV

AAVV11// 22

* input source on the TV using the

II NNPPUUTT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

Connect the HDMI output of the DVD to the HHDDMMII// DD VV II II NN

HHDDMMII// DDVVII II NN 11//22

* jack on

the TV.

No separated audio connection is necessary. HDMI supports both audio and video.

1. How to connect

2. How to use

■

Select the

HHDDMMII

HHDDMMII11 // 22

* input source on the TV

using the

IINNPP UU TT

button on the remote control.

■

Refer to the DVD player's manual for operating instructions.

* AV2: For 26/32LD350, 32LD320

* HDMI 2: For 26/32LD350, 32LD320

If an HDMI cables doesn’t support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.

HDMI Audio Supported Format: AC3 (32KHz, 44.1KHz, 48KHz), Linear PCM (32KHz, 44.1KHz, 48KHz)

NOTE

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

VCR SETUP

Antenna Connection

Connect the RF antenna out socket of the VCR to the

AANN TT EE NNNNAA// CCAABBLL EE IINN

sock-

et on the TV.

Connect the antenna cable to the RF antenna in socket of the VCR.

1. How to connect

■

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

■

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.

)

2. How to use

AV IN 1

ANTENNA /CABLE IN

L R

S-VIDEO VIDEO

OUTPUT

SWITCH

ANT IN

ANT OUT

AUDIO

Wall Jack

Antenna

Composite (RCA) Connection

If you have a mono VCR, connect the audio cable from the VCR to the

AAUUDDIIOO LL // MMOONN OO

jack of the TV.

NOTE

L R

S-VIDEO VIDEO

AUDIO

OUTPUT SWITCH

ANT IN

ANT OUT

RS-232C IN

(

CONTROL&SERVICE)

ANTENNA /CABLE IN

VIDEO

YPB PR

L R

AUDIO

COMPONENT IN

OPTICAL

DIGITAL

AUDIO OUT

AUDIO IN (RGB/DVI)

VIDEO

AUDIO

L/MONO

AV IN 1

Connect the

AAUUDDII OO/VVII DD EE OO

jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

1. How to connect

2. How to use

■

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.

)

■

Select the

AA VV

AAVV11// 22

* input source on the TV using

the

II NNPPUUTT

button on the remote control.

* AV2: For 26/32LD350, 32LD320

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

OTHER A/V SOURCE SETUP

VIDEO

AUDIO

L/MONO

USB IN

AV IN 2

IN 2

H/P

L R

VIDEO

Camcorder

Video Game Set

Connect the

AAUUDDIIOO/VVIIDDEEOO

jacks between TV and external equipment. Match the jack colors

(

Video = yellow, Audio Left = white, and

Audio Right = red

)

1. How to connect

2. How to use

■

Select the

AAVV22

* input source on the TV using

the

II NNPPUUTT

button on the remote control.

■

If connected to

AA VV

AAVV IINN 11

input, select

the

AA VV

AAVV11

input source on the TV.

■

Operate the corresponding external equipment.

* AV2: For 26/32LD350, 32LD320

USB CONNECTION (For 32LD350, 32LD320)

IN 2

VIDEO

AUDIO

L/MONO

H/P USB IN

AV IN 2

Memory Key

Connect the USB device to the

UUSSBB II NN

jack on the side

of TV.

1. How to connect

2. How to use

■

After connecting the

UUSSBB II NN

jack, you use the USB

function. (

pp..5588

)

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

AUDIO OUT CONNECTION

Send the TV’s audio to external audio equipment via the Audio Output port.

If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).

/DVI IN

RS-232C IN

(

CONTROL&SERVICE)

VIDEO

YPB PR

L R

AUDIO

RGB IN (PC)

VIDEO

AUDIO

L/MONO

COMPONENT IN

AUDIO IN (RGB/DVI)

AV IN 1

OPTICAL

DIGITAL

AUDIO OUT

When connecting with external audio equipments, such as amplifiers or speakers, you can turn the TV speakers off in the menu (

pp..8855

NOTE

Do not look into the optical output port. Looking at the laser beam may damage your vision.

Audio with ACP (Audio Copy Protection) function may block digital audio output.

CAUTION

Connect one end of the optical cable to the TV port of

OOPPTTIICCAALL DDIIGGIITTAALL AAUUDDIIOO OOUUTT

Connect the other end of the optical cable to the digital audio input on the audio equipment.

Set the “TV Speaker option - Off” in the AUDIO menu. (

pp ..8855

). See the external audio equipment

instruction manual for operation.

1. How to connect

HEADPHONE SETUP

You can listen to the sound through the headphone.

Plug the headphone into the headphone socket.

To adjust the headphone volume, press the

VVOOLL

+ or

- button. If you press the

MMUUTTEE

button, the sound

from the headphone is switched off.

1. How to connect

IN 2

VIDEO

AUDIO

L/MONO

AV IN 2

H/P

USB IN

Downloaded From TV-Manual.com Manuals

PC SETUP

EXTERNAL EQUIPMENT SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

VGA (D-Sub 15 pin) Connection

/DVI IN

RS-232C I

(

CONTROL&SERV

VIDEO

YPB PR

AUDI

VIDEO

L/MONO

COMPONENT IN

OPTICAL

DIGITAL

AUDIO OUT

RGB IN (PC)

AUDIO IN (RGB/DVI)

RGB OUTPUT

AUDIO

Connect the VGA output of the PC to the

RRGGBB II NN

((

PP CC

))

jack on the TV.

Connect the PC audio output to the

AAUUDDIIOO IINN

((

RRGGBB// DDVVII

))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select the

RRGGBB--PPCC

input source on the TV using the

II NNPPUUTT

button on the remote control.

DVI to HDMI Connection

RS-232C IN

(

CONTROL&SERVICE)

VIDEO

YPB PR

L R

AUDIO

RGB IN (PC)

VIDEO

AUDIO

L/MONO

COMPONENT IN

OPTICAL

DIGITAL

AUDIO OUT

AV IN 1

/DVI IN

AUDIO IN (RGB/DVI)

DVI OUTPUT

AUDIO

Connect the DVI output of the PC to the

HHDDMMII// DD VV II

II NN

HHDDMMII// DDVVII II NN 11

jack on the TV.

Connect the PC audio output to the

AAUUDDIIOO IINN

((RRGGBB// DD VV II ))

jack on the TV.

1. How to connect

2. How to use

■

Turn on the PC and the TV.

■

Select the

HHDDMMII

HHDDMMII11

input source on the TV using

the

IINNPP UU TT

button on the remote control.

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

NOTES

Horizontal Vertical

Frequency(KHz)Frequency(Hz

)

31.469 70.08

31.469 59.94

37.879 60.31

48.363 60.00

47.776 59.87

47.720 59.799

Resolution

720x400

1360x768

640x480

800x600

1024x768

640x350

1280x768

Supported Display Specifications (RGB-PC, HDMI-PC)

To get the the best picture quality, adjust the PC graphics card to 1360x768.

Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.

In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen.

The synchronization input form for Horizontal and Vertical frequencies is separate.

Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

When selecting HDMI-PC, set the “Input Label PC” in the OPTION menu.

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

Screen Setup for PC mode

Selecting Resolution

You can choose the resolution in RGB-PC mode. The

PP ooss iittii oonn, PP hhaassee

, and

SSiizzee

can also be adjusted.

You can use this function only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.

Select

PPIICC TT UU RR EE

Select

SS cc rreeeenn (( RR GG BB -- PPCC ))

Select

RRee ssoolluuttiioonn

Select the desired resolution.

ENTER

Auto Config.

Resolution

Position

Size

Phase

Reset

SCREEN

Move

Prev.

1024 x 768

1280 x 768

1360 x 768

Enter

Move

PICTURE

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

Auto Configure

Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC.

Select

SS cc rreeeenn (( RR GG BB -- PPCC ))

Select

AAuu ttoo CC oo nn ff iigg..

Auto Config.

Resolution

Position

Size

Phase

Reset

SCREEN

Move

Prev.

To Set

ENTER

Select

YYee ss

ENTER

Start Auto Configuration.

ENTER

Select

PPIICC TT UU RR EE

■

If the position of the image is still not correct, try Auto adjustment again.

■

If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the

PPoo ss ii tt ii oo nn, SS ii zz ee

PPhhaa ssee

Yes No

Enter

Move

PICTURE

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

Adjustment for screen Position, Size, and Phase

If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.

This feature operates only in RGB-PC mode.

Select

PPooss ii tt iioo nn, SS ii zz ee

, or

PPhhaa ssee

Make appropriate adjustments.

Auto Config.

Resolution

Position

Size

Phase

Reset

SCREEN

Move

Prev.

ENTER

■

PPooss ii tt iioo nn

: This function is to adjust picture to left/right and up/down as you prefer.

■

SS ii zz ee

: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.

■

PPhh aa ssee

: This function allows you to remove any horizontal noise and clear or sharpen the image of characters.

Select

PPIICC TT UU RR EE

Select

SS cc rreeeenn (( RR GG BB -- PPCC ))

ENTER

Enter

Move

PICTURE

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

Screen Reset (Reset to original factory values)

Returns

PP ooss iitt iioo nn, SS iizz ee

, and

PP hh aass ee

to the default factory settings.

This feature operates only in RGB-PC mode.

Auto Config.

Position

Resolution

Size

Phase

Reset

SCREEN

Move

Prev.

To Set

Select

RRee ssee tt

ENTER

Select

PPIICC TT UU RR EE

Select

SS cc rreeeenn (( RR GG BB -- PPCC ))

ENTER

Select

YYee ss

ENTER

Yes No

Enter

Move

PICTURE

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

REMOTE CONTROL FUNCTIONS

WATCHING TV / CHANNEL CONTROL

When using the remote control, aim it at the remote control sensor on the TV.

ENERGY

CHVOL

123

4506

789

P A G E

SAVING

AV MODE

INPUT

FAV

RATIO

MUTE

ENTER

MARK

LIST

FLASHBK

INFO

Q.MENU

BACK

EXIT

POWER

ENERGY SAVING

AV MODE

INPUT

VOLUME UP

/DOWN

MARK

FAV

RATIO

MUTE

CHANNEL

UP/DOWN

PAGE

UP/DOWN

COLOR BUTTON

Turns the TV on from standby or off to standby.

Adjusts the Energy Saving.

pp..7766

Toggles through preset Video and Audio modes.

pp..5544

Rotates through inputs. Also switches the TV on from standby.

pp..5522

Returns to the last TV channel.

Adjusts the volume.

Select the input to apply the Picture Wizard settings.

pp..6699

Use to mark or unmark a photo/music.

pp..6600,, 6644

Scroll through the programmed Favorite channels.

pp..5500

Changes the aspect ratio.

pp..6666

Switches the sound on or off.

pp..4400

Changes the channel.

Moves from one full set of screen information to the next one.

Access special functions in some memus.

Controls USB menu (Photo List and Music List.) Controls the SIMPLINK compatible devices.

USB,

SIMPLINK

Control buttons

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

■

Open the battery compartment cover on the back side and install the batteries matching correct polarity.

■

Install two 1.5V AAA batteries. Don’t mix old or used batteries with new ones.

■

Close cover.

Installing Batteries

ENERGY

CHVOL

123

4506

789

P A G E

SAVING

AV MODE

INPUT

FAV

RATIO

MUTE

ENTER

MARK

LIST

FLASHBK

INFO

Q.MENU

BACK

EXIT

— (DASH)

LIST

FLASHBK

INFO

Q.MENU

THUMBSTICK

(Up/Down/Left

Right/ENTER)

BACK

SIMPLINK

EXIT

Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.

Displays the channel table.

pp..4488

Tunes to the last channel viewed.

Displays the main menu or clears all on-screen displays and return to TV viewing.

Displays channel information at the top of the screen.

pp..5511

Opens the list of Quick Menu options.

pp..4444

Navigates the on-screen menus and adjusts the system settings to your preference.

Allows the user to move return one step in an interactive application or other user interaction function.

See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears

at the screen.

pp..5566--5577

Clears all on-screen displays and return to TV viewing.

NUMBER button

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

TURNING ON THE TV

WATCHING TV / CHANNEL CONTROL

NOTE

If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

If you do not complete the

IInniitt iiaall ssee tt tt iinngg

, it will appear whenever the TV is switched on until the

IInniittii aall

ss eettttii nn gg

procedure is completed.

First, connect power cord correctly.

At this moment, the TV switches to standby mode.

■

In standby mode to turn TV on, press the ,

II NNPPUUTT,CC HH (( ))

button on the TV or press the

PPOOWWEERR, II NNPPUUTT, CC HH ((

or )),

NNuu mmbb eerr ((00~99))

button on the remote control.

Select the viewing source by using the

II NNPPUUTT

button on the remote control.

■

This TV is programmed to remember which power state it was last set to, even if the power cord is out.

When finished using the TV, press the

PPOOWWEERR

button on the remote control. The TV reverts to standby

mode.

Press the

CCHH ((

))

NNUUMMBBEERR

buttons to select a channel number.

VOLUME ADJUSTMENT

CHANNEL SELECTION

Press the

VVOOLL ((++

--))

button to adjust the volume.

If you want to switch the sound off, press the

MMUUTTEE

button.

You can cancel the Mute function by pressing the

MMUUTTEE

VVOOLL ((++

--))

button.

Adjust the volume to suit your personal preference.

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

INITIAL SETTING

This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus.

■

Default selection is “

HHoommee UUss ee

”. We recommend setting the TV to “

HHoommee UUss ee

” mode for the best pic-

ture in your home environment.

■

“

SS ttoorree DD eemm oo

” Mode is only intended for use in retail environments. Customers can adjust the “

PPii cc tt uu rree

menu -

PPii cc tt uu rree mmoodd ee

” manually while inspecting the TV, but the TV will automatically return to preset in-

store mode after 5 minutes.

■

“

SS ttoorree DDeemm oo

” Mode is an optimal setting for displaying at stores. “Store Demo” mode initializes the TV

to set the image quality.

■

You can also adjust

IInniittii aall SSee ttttiinngg

in the

OOPPTTIIOONN

menu.

Check your antenna connection and start AAuu ttoo TT uu nniinngg

ENTER

Step3. Time setting

Step4. Auto Tuning

Language

Step1. Selecting Language

English

Español

Français

Selecting the environment.

Choose the setting mode you want.

Select [Home Use] when setting TV up in-home. You can adjust picture quality accordingly through Picture Mode menu option.

Store Demo

Home Use

Mode Setting

Step2. Mode setting

NextPrevious

Select

AAuutt oo

MM aannuu aall

Select desired time option.

ENTER

Month

Current Time Setting

Date

Year

2009

Hour

10 AM

Minute

Time Zone

Eastern

Daylight Saving

Auto

Time Setting

NextPrevious

Before starting, be sure that the

TV antenna is connected.

Auto Tuning

Simple Manual

INFO

Select Menu Language.

ENTER

Select

HHoommee UUssee

ENTER

For 19/22LD350C

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

ON-SCREEN MENUS SELECTION

WATCHING TV / CHANNEL CONTROL

Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

Display each menu.

Select a menu item.

Accept the current selection.

ENTER

Return to TV viewing.

EXIT

Enter

Move

Auto Tuning

Manual Tuning

Channel Edit

CHANNEL

TIME

PICTURE

OPTION

AUDIO

LOCK

Enter

Move

Auto Volume : On

Clear Voice II : On

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

AUDIO

Enter

Move

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

TIME

Enter

Move

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

LOCK

Enter

Move

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

OPTION

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

For USA For Canada

Enter

Move

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

PICTURE

E E

19/22/26LD350, 19/22LD350C

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

Display each menu.

Select a menu item.

Accept the current selection.

ENTER

Return to TV viewing.

EXIT

Enter

Move

Auto Tuning

Manual Tuning

Channel Edit

CHANNEL

OPTION

PICTURE

LOCK

AUDIO

INPUT

TIME

USB

Enter

Move

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

PICTURE

Enter

Move

Auto Volume : On

Clear Voice II : On

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

AUDIO

Enter

Move

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

TIME

Enter

Move

Photo List

Music List

USB

Enter

Move

AV1

AV2

Component

RGB-PC

HDMI1

HDMI2

INPUT

Enter

Move

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

LOCK

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

Enter

Move

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

OPTION

For USA For Canada

32LD350, 32LD320

NOTE

PPoowweerr II nndd ii ccaattoorr

: For 32LD320

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

QUICK MENU

WATCHING TV / CHANNEL CONTROL

Display each menu.

Make appropriate adjustments.

ßßAAsspp eecc tt RR aattiioo

: Selects your desired picture format.

PPii cc tt uu rree MMoo ddee

: Selects the factory preset picture depend on the viewing environment.

SS oouunndd MM oodd ee

: Selects the factory preset sound for type of program.

MMuullttii AAuuddiioo

: Changes the audio language (Digital signal).

SS AA PP

: Selects MTS sound (Analog signal).

SS ll eeeepp TTiimmee rr

: Select the amount of time before your TV turns off automatically.

DDeell//AAdddd//FFaavv

: Select channel you want to add/delete or add the channel to the Favorite List.

CC aapp tt ii oonn

: Select on or off.

EEnneerr gg yy SS aavviinngg

: Select the Energy Saving level to reduce the TV’s power consumption by adjusting back-

light. UUSS BB DD eevvii cc ee

: Select “Eject” in order to eject a USB device.

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently.

Q.MENU

EXIT

Return to TV viewing.

16:9

Aspect Ratio

16:9

Aspect Ratio

19/22/26LD350, 19/22LD350C 32LD350, 32LD320

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

Auto Scan (Auto Tuning)

Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.

Run this function if you change your residence or move the TV. Auto Tuning memorizes only the channels available at the time.

Select

CC HH AANNNNEE LL

Select

AAuu ttoo TT uu nniinngg

Select

YYee ss

Run

AAuu ttoo tt uu nn iinngg

Enter

Move

CHANNEL

Enter

Move

CHANNEL

ENTER

Auto Tuning

Manual Tuning

Channel Edit

Auto Tuning

Manual Tuning

Channel Edit

■

The TV will ask for a password if parental control has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel search.

■

When setting the Auto tuning or Manual tuning, the number of maximum channels you can store is 1000.

It is subject to change depending on the broadcasting signal environment.

■

Memorizes all the available channels in the order of DTV, TV, CADTV and CATV.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Check your antenna connection. The previous channel information will be updated during Auto Tuning.

Yes

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

Select

CC HH AANNNNEE LL

ENTER

When selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received.

Add/Delete Channel (Manual Tuning)

Enter

Move

CHANNEL

Enter

Move

CHANNEL

Channel

Select channel type and RF-channel number.

DTV

Delete

Auto Tuning

Manual Tuning

Channel Edit

DTV 2-1

Bad Normal Good

Select

MM aannuuaa ll TTuu nn iinngg

Select

DDTTVV, TT VV, CC AA DD TTVV

, or

CC AA TT VV

Select channel you want to add or delete.

ENTER

Select

AAdd dd

DDee llee tt ee

ENTER

Auto Tuning

Manual Tuning

Channel Edit

■

The TV will ask for a password if parental control has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel search.

■

When setting the Auto tuning or Manual tuning, the number of maximum channels you can store is 1000.

It is subject to change depending on the broadcasting signal environment.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

Select a channel.

ENTER

The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue.

When a channel number is deleted, it means that you will be unable to select it using

CCHH

button during TV

viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select

it in the

CChhaann nn ee ll EE dd iitt

menu.

Channel Editing

Enter

Move

CHANNEL

Auto Tuning

Manual Tuning

Channel Edit

Select

CC HH AANNNNEE LL

ENTER

Select

CC hhaannnn eell EE ddiitt

Return to the previous menu.

BACK

Return to TV viewing.

EXIT

Ch. Change

Page Change

Navigation

Add/Delete

■

Keep pressing the button and use the

or buttons to move between DTV,

TV, CADTV and CATV.

■

If the channel list is too long, use the

CC HH

or button to move between pages.

Add or delete a channel.

BLUE

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

CHANNEL LIST

WATCHING TV / CHANNEL CONTROL

You can check which channels are stored in the memory by displaying the channel list.

Display the

CC hhaannnn eell LL iiss tt

LIST

Displaying Channel List

Select a channel.

Switch to the chosen channel number.

ENTER

Selecting a channel in the channel list

Turn the pages.

P A G E

Return to TV viewing.

EXIT

Paging through a channel list

Exit

2-1

3-1

4-1

DTV

Channel List

This padlock is displayed when the channel is locked with parental control.

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

FAVORITE CHANNEL SETUP

Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels.

To tune to a favorite channel, press the

FF AA VV

(Favorite) button repeatedly.

Return to TV viewing.

EXIT

Select

FF aa vv oorriittee

Select your desired channel.

P A G E

123

4506

789

Q.MENU

Select

DDeell// AA dddd//FFaa vv

Favorite

Del/Add/Fav

Favorite

Del/Add/Fav

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

FAVORITE CHANNEL LIST

WATCHING TV / CHANNEL CONTROL

Exit

2-1

3-1

4-1

DTV

Favorite List

Select a channel.

Switch to the chosen channel number.

ENTER

Selecting a channel in the favorite channel list

Turn the pages.

P A G E

Return to TV viewing.

EXIT

Paging through a favorite channel list

Display the Favorite channel list.

FAV

MARK

Displaying the favorite channel list

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

BRIEF INFORMATION

INFO

Brief Info shows the present screen information.

Show the Brief Info on the screen.

BACK

Return to TV viewing.

Brief Info Title Test..

Sat, Feb 21, 2009 10:10 AM 11:40 AM

CNN

DOLBY DIGITAL

10:40 AM

Multilingual CaptionD 1080i TV-PG D L S V

Program title

Day, Month, Year

Program start time

Program progress bar

Program finish time

Present time

Banner information

1 2 3 4 5 67

MMuullttiilliinngguuaall

: The program contains two or more audio services. Use

the

QQ..MMEE NNUU

menu to select wanted Audio.

CCaappttiioonn

: The program contains one or more caption services. Use

the

QQ..MMEE NNUU

menu to select wanted Closed caption.

DDoollbbyy DD iiggiittaa ll

: The program contains a Dolby Digital audio signal

in TV and HDMI input source.

The original aspect ratio of the video is 4:3 The original aspect ratio of the video is 16:9 (wide)

The video resolution is 720x480i The video resolution is 720x480p The video resolution is 1280x720p The video resolution is 1920x1080i The video resolution is 1920x1080p

VV--CC hh ii pp

: The program contains V-Chip information. Refer to the LOCK menu: A (Age), D (Dialogue), L (Language), S (Sex), V (Violence), FV (Fantasy Violence)

480i 480p 720p

10 8 0 i

10 8 0 p

4:3

16:9

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

INPUT LIST

WATCHING TV / CHANNEL CONTROL

TV AV Component

HDMI RGB-PC

19/22LD350, 19/22LD350C:

TV AV1 AV2

HDMI2 HDMI1 RGB-PC

Component

26/32LD350, 32LD320:

Select the desired input source.

■

32LD350, 32LD320: You can also select the desired input source in the

IINNPPUUTT

menu.

INPUT

ENTER

TV AV Component RGB-PC HDMI1

Input Label

Exit

Select a desired input source (except

TT VV

Then, you can select your desired

IInn ppuutt

LLaa bbee ll

with using Blue button.

pp .. 55 33

ie)

ie) In case of changing the input label using Blue button

Only these input signals which are connected to a TV can be activated and selected.

■

TT VV

: Select it to watch over-the-air, cable and digi-

tal cable broadcasts.

■

AA VV

: Select them to watch a VCR or other external

equipment.

■

CC oomm ppoonnee nn tt

: Select them to watch DVD or a

Digital set-top box.

■

RRGGBB--PPCC

: Select it to view PC input.

■

HHDD MMII

: Select them to watch high definition

devices.

VCR DVD PC Game

■

When new external device is connected, this popup menu is displayed automatically.

If selecting

YYee ss

, you can select input source that you want to

appreciate.

■

But, when selecting “

SS IIMM PPLLII NNKK- OO nn

”, popup menu for HDMI

input will not be displayed.

Ye s

New external input is connected. Do you want to use this?

AV2

Disconnected inputs are inactive (grayed out)

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

INPUT LABEL

This indicates which device is connected to which input port.

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Component

RGB-PC

HDMI

FF GG

Select

OOPPTTIIOONN

Select

IInnpp uu tt LL aabb eell

Select the label.

ENTER

Select the source.

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

With using OPTION menu

Select the source.

Select the label.

INPUT

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

With using INPUT button

19/22LD350,

19/22LD350C

AV1

AV2

Component

RGB-PC

HDMI1

HDMI2

FF GG

26/32LD350,

32LD320

BLUE

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

AV MODE

WATCHING TV / CHANNEL CONTROL

AV Mode toggles through preset Video and Audio settings.

AV MODE

Off Cinema

Game Sport

Press the

AAVV MMOODDEE

button repeatedly to

select the desired source.

ENTER

■

If you select “

CC iinnee mmaa

” in AV mode,

CC iinnee mmaa

will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode” respectively.

■

If you select “

OOff ff

” in AV mode, the

“

PPii cc tt uu rree MM oodd ee

” and “

SS oouunndd MMoo ddee

”

return to previous selected value.

■

OOff ff

: Disables the AV MODE.

■

CC iinnee mmaa

: Optimizes video and audio for

watching movies.

■

SS pp oorr tt

: Optimizes video and audio for

watching sports events.

■

GGaa mmee

: Optimizes video and audio for

playing games.

SIMPLE MANUAL

You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted.

Select

OOPPTTIIOONN

Select

SS ii mmppllee MMaann uu aall

ENTER

Select the part of the manual you want to see.

ENTER

EXIT

Return to TV viewing.

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

KEY LOCK

The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.

Select

OOPPTTIIOONN

Select

KKeeyy LLoocckk

ENTER

Select

OO nn

OOff ff

ENTER

■

KKeeyy LLoo cc kk‘OO nn

’, if the TV is turned off,

press the

/ I, INPUT, CH

(( ))

button

on the TV or POWER, INPUT, CH

((

))

or NUMBER buttons on the remote

control.

■

With the

KKeeyy LLoocckk OOnn

, the display

‘

KKeeyy LL oocckk

’ appears on the screen if any button on the front panel is pressed while viewing the TV.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : On

Simple Manual

Caption : Off

Set ID : 1

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Off

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the

logo are fully supported.

SIMPLINK can be turned on and off in the user menus.

Enter

Move

OPTION

Select

OOPPTTIIOONN

Select

SS IIMM PP LL II NN KK

Select

OOnn orOOff ff

Enter

Move

OPTION

ENTER

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Off

NOTE

Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable.

When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will stop.

When you select a device with home theater functionality, the sound output automatically switches to the home theater speakers and the TV speakers are turned off.

If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with an OPTICAL cable.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Downloaded From TV-Manual.com Manuals

WATCHING TV / CHANNEL CONTROL

■

DDii rreecc tt PPllaayy ::

After connecting AV devices to the TV, you can directly control the devices and play media with-

out additional settings.

■

SS eell eecctt AAVV ddeevviicc ee::

Enables you to select one of the AV devices connected to TV.

■

DDiiss cc pp llaayybb aacc kk::

Control connected AV devices by pressing the ,

ENTER, G, A,

ll ll

, FFand GGbuttons.

■

PPoowweerr ooffff aallll ddeevviicceess::

When you power off the TV, all connected devices are turned off.

■

SS wwii tt cchh aauudd iioo -- oouutt::

Offers an easy way to switch audio-out.

■

SS yynn cc PPoowweerr oo nn::

When the equipment with Simplink function connected HDMI terminal starts to play, The TV

will change automatically to turn on mode.

(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function)

Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics Control).

SIMPLINK Menu

TTVV vviieeww ii nngg

: Switch to the previous TV

channel regardless of the current mode. DDIISSCC ppllaa yy bbaa cckk

: Select and play discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen.

VVCCRR ppll aayybb aacckk

: Control the connected

VCR. HHDDDD RReeccoorr ddii nn ggss ppllaayybbaacckk

: Control

recordings stored in HDD. AAuu ddii oo OOuutt ttoo HHoommee TThheeaa tt eerr ss ppeeaa kk--

eerr //AAuuddiioo OOuutt tt oo TTVV

: Select Home Theater speaker or TV speaker for Audio Out.

SIMPLINK Functions

When no device is connected (displayed in gray)

Selected Device

When a device is connected (displayed in bright color)

Display

SS IIMM PPLL II NNKK

menu.

Select the desired device.

Control connected AV devices.

ENTER

Downloaded From TV-Manual.com Manuals

ENTRY MODES

USB

USB (For 32LD350, 32LD320)

Precautions when using the USB device

Only a USB storage device is recognizable.

If the USB storage device is connected through a USB hub, the device is not recognizable.

A USB storage device using an automatic recognition program may not be recognized.

A USB storage device which uses its own driver may not be recognized.

The recognition speed of a USB storage device may depend on each device.

Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.

Only use a USB storage device which has normal music files or image files.

Please use only a USB storage device which was formatted as a FAT 32 or NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized.

Please connect power to a USB storage device (over 0.5A) which requires an external power supply. If not, the device may not be recognized.

Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized.

Some USB storage devices may not be supported or operate properly.

Please backup important files because data on USB device may be damaged. Data management is consumer's responsibility and as a result, the manufacturer does not cover data damage.

If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices.

In case of USB storage devices formatted as NTFS, deletion is not allowable.

File alignment method of USB storage device is similar to Window XP and file name can recognize up to 100 English characters.

The recommended capacity is 1TB or less for a USB external hard disk and 32 GB or less for USB memory.

If a USB external hard disk with a “Energy Saving” function doesn’t work, turn the hard disk off and on again to make it work properly. Refer to the user manual of the application USB external hard disk.

When removing the USB device

Connect the USB device to the

UUSSBB IINN

jacks on the side of TV.

Select

PPHHOOTTOO LL II SS TTorMM UU SS IICC LLII SS TT

IN 2

USB IN

Memory Key

PHOTO LIST MUSIC LIST

Select

UUSS BB DD eevvii cc ee

Select

EEjjee cc tt

Select the

UUSS BB DD eevvii cc ee

menu before removing the

USB device.

ENTER

Q.MENU

ENTER

■

This TV supports JPG and MP3 files.

When you connect a USB device, this pop up menu is displayed automatically. When the Pop Up menu does not appear, you can select Photo List or Music List in the USB menu. In USB device, you can not add a new folder or delete the existing folder.

Downloaded From TV-Manual.com Manuals

PHOTO LIST

USB

You can view .JPG files from USB storage devices. The On Screen Display on your model may be slightly different.

Screen Components

Moves to upper level folder

Preview: Display the thumbnail/folder name of the photo in the selected folder

Current page/Total pages

Total number of marked photos

Corresponding buttons on the remote control

Supported photo file: *.JPG

■

You can play JPG files only.

■

Only baseline scan is supported among JPG.

■

Available JPG size (width x height, pixel): 64 x 64 - 15360 x 8640

Select

UUSSBB

Select

PPhh oottoo LLiiss tt

ENTER

Navigation Popup Menu Page Change Mark Exit

MARK

Page 2/3

No Marked

Photo List

Up Folder

1366x768, 125KB

KY101

06/10/2008

KY102

04/03/2008

JMJ001

01/01/2000

JMJ002

06/15/2008

JMJ003

04/03/2008

JMJ004

02/18/2008

KY103

03/30/2008

KY104 06/19/2008

KY105

01/31/2008

JMJ005

05/13/2008

JMJ006

05/26/2008

JMJ007

02/18/2008

JMJ008

02/18/2008

Up Folder

Drive1

JMJ001

3 4

Downloaded From TV-Manual.com Manuals

USB

Photo Selection and Popup Menu

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

■

Use the

CC HH

button to navigation in the

photo page.

■

Use the

MMAARRKK

button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show.

Select the desired Popup menu.

ENTER

Page 2/3

No Marked

Photo List

Up Folder

1366x768, 125KB

KY101

06/10/2008

KY102

04/03/2008

JMJ001

01/01/2000

JMJ002

06/15/2008

JMJ003

04/03/2008

JMJ004

02/18/2008

KY103

03/30/2008

KY104

06/19/2008

KY105

01/31/2008

JMJ005

05/13/2008

JMJ006

05/26/2008

JMJ007

02/18/2008

JMJ008

02/18/2008

Up Folder

Page 2/3

No Marked

Photo List

Up Folder

1366x768, 125KB

KY101

06/10/2008

KY102

04/03/2008

JMJ001

01/01/2000

JMJ002 06/15/2008

JMJ003

04/03/2008

JMJ004

02/18/2008

KY103

03/30/2008

KY104

06/19/2008

KY105

01/31/2008

JMJ005

05/13/2008

JMJ006 05/26/2008

JMJ007

02/18/2008

JMJ008

02/18/2008

Up Folder

Drive1

JMJ001

1366x768, 125KB

View

Mark All

Delete

Navigation Page Change Mark Exit

MARK

Popup Menu

Navigation Page Change Mark Exit

MARK

Popup Menu

When you select a file (not folder), this PopUp menu is displayed.

VViieeww

: Display the selected item.

MMaarrkk AAllll

: Mark all photos on the screen.

UUnnmm aarr kk AAllll

: Deselect all marked photos.

DDee llee tt ee

: Delete the selected photo item.

CC lloo ss ee

: Close the pop-up menu.

Downloaded From TV-Manual.com Manuals

USB

Full Screen Menu

You can change the Photo List view so that it fills the screen. More operations are available in full screen mode.

■

Use the

CC HH

button to navigation in the

photo page.

Select the target folder or drive.

Select the desired photos.

Show the Popup menu.

Select

VViiee ww

The selected photo is displayed in full size.

ENTER

Page 2/3

No Marked

Photo List

Up Folder

1366x768, 125KB

KY101

06/10/2008

KY102

04/03/2008

JMJ001 01/01/2000

JMJ002 06/15/2008

JMJ003 04/03/2008

JMJ004

02/18/2008

KY103

03/30/2008

KY104

06/19/2008

KY105

01/31/2008

JMJ005 05/13/2008

JMJ006 05/26/2008

JMJ007 02/18/2008

JMJ008 02/18/2008

Up Folder

Page 2/3

No Marked

Photo List

Up Folder

1366x768, 125KB

KY101

06/10/2008

KY102

04/03/2008

JMJ001

01/01/2000

JMJ002

06/15/2008

JMJ003

04/03/2008

JMJ004

02/18/2008

KY103

03/30/2008

KY104

06/19/2008

KY105

01/31/2008

JMJ005

05/13/2008

JMJ006

05/26/2008

JMJ007

02/18/2008

JMJ008

02/18/2008

Up Folder

Drive1

JMJ001

1366x768, 125KB

View

Mark All

Delete

Navigation Page Change Mark Exit

MARK

Popup Menu

Navigation Page Change Mark Exit

MARK

Popup Menu

The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.

1/17

Slideshow BGM Del ete Op tion Hide

Downloaded From TV-Manual.com Manuals

USB

Select the

SSlliiddeesshhooww, BBGGMM

((RRoottaattee))

DDeelleett ee,OOppttiioonn

, or

HHiiddee..

■

Use button to select the previous or next photo.

■

Use button to select and control the menu on the full-sized screen.

ENTER

NOTE

This TV will not be able to decode most JPG images saved using the Progressive option.

1/17

Slideshow BGM Delete Option Hide

Press

FF GG

to set the time interval between slides.

Slide Speed

Fast

Cancel

...

Music Album

Enter

SS ll iidd eess hh ooww

: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show.

■

Set the time interval of the slide show in

OOpp tt ii oonn

BBGG MM

: Listen to music while viewing photos in full size.

■

Set the BGM device and album in

OOpp tt ii oonn

((RRoott aattee ))

: Rotate photos.

■

Rotates the photo 90°, 18 0 °, 270°, 360° clockwise.

■

Photo cannot be rotated if its width is greater than the available supported resolution height.

DDee llee tt ee

: Delete photos.

OOpp tt ii oonn

: Set values for

SS ll iidd ee SSpp eeee dd

and

MM uu ssiicc

AAll bbuu mm

■

Use button and

EENNTTEERR

button to set

values. Then go to and press

EENNTTEERR

to save

the settings.

■

You cannot change

MM uu ssiicc AAllbb uu mm

while BGM is

playing.

HHiidd ee

: Hide the menu on the full-sized screen.

■

To see the menu again on the full-sized screen, press EENNTTEERR

button to display.

Downloaded From TV-Manual.com Manuals

MUSIC LIST

USB

You can use the Music List menu to play MP3 files from a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different.

Screen Components

Supported music file: *.MP3

Bit rate range 32 Kbps - 320 Kbps

• Sampling rate (Sampling Frequency) MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz MPEG2 layer 3: 16 kHz, 22.05 kHz, 24 kHz MPEG2.5 layer 3: 8 kHz, 11.025 kHz, 12 kHz

Moves to upper level folder

Preview: If any album jacket for the file exists, this jacket is displayed.

Current page/Total pages

Total number of marked musics

Corresponding buttons on the remote control

Select

UUSSBB

Select

MM uu ssiicc LLiiss tt

ENTER

Music List

Up Folder

Title Duration

3 4

Page 2/3

No Marked

Drive1

Navigation Popup Menu Page Change Mark Exit

MARK

00:00 / 04:16

Up Folder

Downloaded From TV-Manual.com Manuals

USB

Music Selection and Popup Menu

■

Use the

CC HH

button to navigation in

the music page.

■

Use

MM AA RR KK

button to mark or unmark a music file. If no music is marked, all the music in the folder will be played in sequence. When one or more music files are marked, the marked music files will be played in sequence. If you want to listen to only one song repeatedly, just mark that one file and play.

Select the target folder or drive.

Select the desired musics.

Show the Popup menu.

Select the desired Popup menu.

ENTER

EXIT

Return to TV viewing.

Navigation Page Change Mark Exit

MARK

Popup Menu

Navigation Page Change Mark Exit

MARK

Popup Menu

Page 2/3

No Marked

Music List

Up Folder

00:00 / 04:16

Up Folder

Drive1

Title

Duration

Page 2/3

No Marked

Music List

Up Folder

00:00 / 04:16

Up Folder

Drive1

Title

Duration

3945 KB 128 Kbps

Play

Play with Photo

Mark All

Delete

PPll aa yy

(During stop): Play the selected music.

Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the

EENNTTEERR

button, the current

music in playback will stop.

PPll aayy MMaarrkkee dd

: Play the selected musics. Once a music finishes playing, the next selected one will be played automatically.

SS ttoopp PPllaa yy

(During playback): Stop the play-

ing musics.

PPll aayy wwiitthh PPhhoottoo

: Start playing the selected

musics and then move to the Photo List.

MM aarr kk AAllll

: Mark all musics in the folder.

UUnnmm aarr kk AAllll

: Deselect all marked music.

DDee llee tt ee

: Delete the selected music.

CC lloo ss ee

: Close the pop-up menu.

Downloaded From TV-Manual.com Manuals

USB

■

The play information box (as shown below) will automatically move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended period of time.

NOTE

When music is playing, is displayed in front of the music play time.

A damaged or corrupted music file that does not play displays 00:00 as the play time.

Music files with copy-protection will not play.

Press

EENNTTEERR

, AA,

BBAACC KK

, or

EEXXIITT

button to stop the screen saver.

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL

PICTURE CONTROL

This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. You can select a different aspect ratio depending on input source (analog broadcasting, digital broadcasting,

aux).

■

You can also adjust

AAsspp eecctt RR aatt iioo

the

QQ .. MM EENNUU

■

Press the

RRAATTIIOO

button repeatedly to

select the desired picture format.

Enter

Move

PICTURE

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

16:9

Just Scan

Set By Program

4:3

Zoom

Cinema Zoom 1

Select

PPIICC TT UU RR EE

Select

AAsspp eecctt RR aatt iioo

Select the desired picture format.

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

16:9

Adjust the picture horizontally, in a linear proportion to fill the entire screen.

Just Scan

Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video.

Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated.

JJuusstt SS ccaann

operates only in DTV/CADTV/Component/HDMI-DTV/DVI-DTV (720p/1080i/1080p) input source.

Set By Program

Selects the proper picture proportion to match the source’s image.

4:3

Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.

Zoom

Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.

■

When adjusting in Q.MENU menu, a. or button: Adjust proportion of Zoom. b. or button: Move the image on the screen.

Cinema Zoom

Choose Cinema Zoom when you want to enlarge the picture in correct proportion.

This enlarges an image with cinemascope aspect ratio (2.35:1) without distortion.

Note: When enlarging or reducing the picture, the image may become distorted.

■

or button: Adjust proportion of

Cinema Zoom. The adjustment range is 1-16.

■

or button: Move the image on the screen.

Just Scan

(4:3 4:3)

(16:9 16:9)

Set By Program

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

PICTURE WIZARD

PICTURE CONTROL

Select

PPIICC TT UU RR EE

Select

PPii cc tt uu rree

WWii zzaarr dd

ENTER

Adjust

PPii cc tt uu rree WWiizz aarr dd

Adjust

WWhh ii tt ee LL eevvee ll

ENTER

Adjust

BBllaacckk LLeevvee ll

ENTER

Adjust

HHoorr ii zzoo nntt aall

SS hh aarrpp nnee ssss

ENTER

Adjust

CC oolloorr

ENTER

Adjust

TTiinn tt

ENTER

Picture Wizard

With Picture Wizard, you can adjust the picture quality of the original image.

Black Level

Set the screen above identical to the Recommended sample below.

NextPrevious

• Brightness 50

Low HighRecommended

Color

Set the screen above identical to the Recommended sample below.

NextPrevious

• Color 50

Low HighRecommended

White Level

Set the screen above identical to the Recommended sample below.

NextPrevious

Low HighRecommended

• Contrast 90

Tint

Set the screen above identical to the Recommended sample below.

NextPrevious

Low HighRecommended

• Tint 0

Horizontal Sharpness

Set the screen above identical to the Recommended sample below.

NextPrevious

• H Sharpness 50

Low HighRecommended

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

This feature lets you adjust the picture quality of the original image.

Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step.

When you adjust the image to

LL ooww

RReecc oo mm mm ee nndd ee dd

HHii gg hh

, you can see the example

of the changes you made.

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

Select input source to apply the settings.

FAV

MARK

Adjust

VVee rrtt iiccaall

SS hh aarrpp nnee ssss

ENTER

Adjust

BBaa cc kk lliigghhtt

ENTER

Finish the Picture Wizard.

ENTER

Save.

ENTER

Complete

ConfirmMovePrevious

Vertical Sharpness

Set the screen above identical to the Recommended sample below.

NextPrevious

• V Sharpness 50

Low HighRecommended

Backlight

Set the Backlight to your Brightness preference.

NextPrevious

• Backlight 50

Dark BrightRecommended

DTV

AV1

AV2

Component

RGB-PC

HDMI1 HDMI2

Select (an) input(s) to apply the settings.

Warning: The picture quality may vary according to the different types of signal and inputs.

Mark

MARK

■

If you stop the setting before the final step, the changes will not be saved to the TV.

■

Once the

PPii cc tt uu rree WWii zzaarrdd

sets the pic-

ture quality,

EEnneerr gg yy SSaa vv iinngg

is changed

OOffff

automatically.

The current adjustment value is saved to Expert1.

Adjust

CC oolloorr

TTeemmpp ee rraa tt uu rree

ENTER

Color Temperature

Set the Color Temperature as you like. Refer to the samples below.

NextPrevious

• Color Temperature Warm

Warm CoolMedium

Adjust

DDyynnaa mmiicc

CC oonn ttrraa sstt

ENTER

Dynamic Contrast

Set the Dynamic Contrast as you like. Refer to the samples below.

NextPrevious

• Dynamic Contrast Off

Off HighMedium

Adjust

CC ooll oorr GGaa iinn

ENTER

Color Gain

Set the Color Gain as you like. Refer to the samples below.

NextPrevious

• Color Gain Original

Original HighMedium

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

PRESET PICTURE SETTINGS (PICTURE MODE)

PICTURE CONTROL

There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually.

Enter

Move

PICTURE

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

Select

PPIICC TT UU RR EE

Select

PPii cc tt uu rree MMoo ddee

Select

VVii vv iidd,SS tt aannddaa rrdd, NNaattuurraa ll

CCiinn eemmaa, SS ppoorrtt

, or

GGaa mmee

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Vivid

Standard

Natural

Cinema

Sport

Game

Expert1

Expert2

■

VVii vvii dd, SS tt aannddaarrdd, NNaattuurr aall, CCiinneemm aa

SS ppoorrtt

, and

GGaa mmee

Settings are preset for the optimum picture quality at the factory.

■

VViivviidd

: This is the mode to maximize the effect of the video in the retail store. Strengthen the contrast, brightness, color and sharpness for vivid picture.

■

SS ttaanndd aarr dd

: This is the mode to realize optimum viewing condition for the general user.

■

NNaatt uu rraall

: This is the mode to display the

most natural screen status.

■

CC iinnee mmaa

: This mode optimizes video for

watching movies.

■

SS pp oo rr tt

: This is the video mode to emphasize dynamic video and primary color (e.g, white, uniform, grass, sky blue etc.) by realizing the optimal screen for sports.

■

GGaa mmee

: This is the mode to realize fast

response speed in a fast gaming screen.

■

EExx ppee rrtt

: This is the mode to adjust the video in detail for video quality expert and general user.

■

You can also adjust

PPii cc tt uu rree MMoo ddee

the

QQ..MM EE NNUU

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

MANUAL PICTURE ADJUSTMENT - USER MODE

Adjust the picture appearance to suit your preference and viewing situations.

Select

PPIICC TT UU RR EE

Make appropriate adjustments.

Select

BBaa cc kk lliigghhtt, CC oonn ttrraa sstt, BBrr iigghhttnnee ssss

SS hh aarrpp nnee ssss, CC oolloorr

, or

TTiinn tt

Select

PPii cc tt uu rree MMoo ddee

ENTER

Select

VVii vv iidd,SS tt aannddaa rrdd, NNaattuurraa ll

CCiinn eemmaa, SS ppoorrtt

, or

GGaa mmee

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

• Backlight 70

Enter

■

When adjusting Energy Saving,

BBaa cc kk lliigghhtt

function is disabled.

■

BBaa cc kk lliigghhtt

: This function adjusts the brightness of LCD panel, to control the brightness of the screen. Adjusting the backlight is recommended when setting the brightness of the set. When decreasing the backlight, the brightness of the black becomes darker without any loss in video signal and the power consumption is reduced.

■

CC oonn ttrraa sstt

: Increase or decrease the gradient of the video signal. You may use Contrast when the bright part of picture is saturated.

■

BBrr iigghhttnnee ssss

: Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the picture is saturated.

■

SS hh aarrpp nnee ssss

: Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image.

■

CC oolloorr

: Adjusts intensity of all colors.

■

TTiinn tt

: Adjusts the balance between red

and green levels.

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

PICTURE IMPROVEMENT TECHNOLOGY

PICTURE CONTROL

Select

PPIICC TT UU RR EE

Select

AAddvvaann cc eedd CCoo nn tt rrooll

Select your desired options.

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Make appropriate adjustments.

Enter

Move

PICTURE

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

Enter

Move

PICTURE

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

Color Temperature

Medium

Dynamic Contrast

Off

Dynamic Color

Off

Noise Reduction

Off

Gamma

Medium

Black Level

Low

Eye Care

Off

Real Cinema

Off

You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default after making adjustments to each input source, execute the

PP iiccttuu rr ee RR eessee tt

function for each

PP iiccttuu rr ee MM ooddee

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

EXPERT PICTURE CONTROL

Select

PPIICC TT UU RR EE

Select

PPii cc tt uu rree MMoo ddee

Select

EExxppeerr tt CC oonnttrr ooll

Select

EExx ppee rrtt 11

EExx ppee rrtt 22

ENTER

Make appropriate adjustments.

By segmenting categories,

EExxppee rr tt 11

and

EExxppee rr tt 22

provide more categories which users can set as they see

fit, offering the optimal picture quality for users. This may also be used be a professional to help optimize the TV performance in the environment the TV is in.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

PICTURE

• Brightness 50

• H Sharpness 50

• V Sharpness 50

• Color 50

• Tint 0

• Expert Control

• Picture Reset

Screen (RGB-PC)

Dynamic Contrast

Off

Noise Reduction

Low

Gamma

Off

Black Level

Low

Real Cinema

Off

Color Standard

Color Gamut

Standard

Edge Enhancer

High

xvYCC

Auto

Select your desired menu option.

ENTER

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Expert1

• Backlight 80

• Contrast 90

• Brightness 50

• H Sharpness 50

Vivid

Standard

Natural

Cinema

Sport

Game

Expert1

Expert2

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

■

Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish.

■

Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker.

■

Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid.

■

Reduces screen noise without compromising video quality.

Low : Make dark and middle gray level area of the picture brighter. Medium: Express original picture levels. High: Make dark and middle gray level area of the picture darker.

■

You can adjust brightness of dark area and middle gray level area of the picture.

Low: The reflection of the screen gets darker. High: The reflection of the screen gets brighter. Auto: Realizing the black level of the screen and set it to High or Low automatically.

■

Set black level of the screen to proper level.

■

This function enables to select 'Low' or 'High' in the following mode: AV (NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.

*This feature is not available for all models.

■

Adjust the brightness of the screen to prevent the screen from being too bright. Dims extremely bright pictures.

■

This feature is disabled in “

PPii cctt uu rree MM ooddee -- VV iivviidd, CC iinnee mmaa

”.

■

Makes video clips recorded in film look more natural by eliminating judder effect.

Dynamic Contrast

Dynamic Color

Noise Reduction

Gamma

Black Level

Eye Care

Real Cinema

Color Temperature

(Advanced Control)

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

■

Convert the color of a different video to HD color.

■

Adjusts the overall color of the screen by changing the color of white.

a. Method : 2 Points

- Pattern: Inner, Outer

- Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment range is -50 - +50.

b. Method : 10 Point IRE

- Pattern: Inner, Outer

- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal

and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue according to each setting.

- Luminance: This function displays calculated luminance value for 2.2 gamma. You can

input luminance value you want at 100 IRE, than the target luminance value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.

- Red/Green/Blue: The adjustment range is -50 - +50.

■

As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colors but can be used to selectively adjust the 6 color areas (Red/Green/Blue/Cyan/Mgt/Yellow).

Color difference may not be distinctive even when you make the adjustments for the general video.

Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.

- Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is -30 - +30.

- Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30.

- This feature is disable in RGB-PC and HDMI-PC mode.

*This feature is not available for all models.

■

As the technology to reduce the power consumption while keeping the same brightness, this has the effect of reducing power consumption, improvement in contrast.

Color Temperature

(Expert Control)

Color Management System

OPC

Color Standard

Standard: Displays standard set of colors. Wide: Increase number of colors used.

■

Maximize the utilization of color to increase color quality.

Color Gamut

■

Show clearer and distinctive yet natural edges in of the video.

■

This function is enabled in "

PPii cc tt uu rree MMoo ddee- CC iinnee mmaa, EExx ppee rrtt

Edge Enhancer

■

This is the pattern necessary for expert adjustment.

■

This function is enabled in "

PPii cc tt uu rree MMoo ddee- EExx ppee rrtt

" when you watch DTV.

Expert Pattern

■

This is the function to filter the specific colors of the video. You can use the RGB filter to set color saturation and hue accurately.

Color Filter

*This feature is not available for all models.

■

This is the function to express richer color.

■

This feature represents rich color as much as conventional video signal.

■

This function is enabled in "

PPii cc tt uu rree mm oodd ee- CC iinnee mmaa, EExx ppee rrtt

" when xvYCC sig-

nal is inputted through HDMI.

xvYCC

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

ENERGY SAVING

PICTURE CONTROL

It reduces the TV’s power consumption by lowering the backlight level. You can increase the brightness of your screen by adjusting the

EEnn ee rr gg yy SSaa vv iinn gg

level or by setting the

PP iiccttuurree

MM oodd ee

■

When selecting

SS cc rreeeenn oo ffff

, TV turned

off after 3 seconds.

■

If you adjust “

EE nn ee rrgg yy SS aa vvii nn gg --

MM ii nn ii mm uu mm, MM ee dd ii uu mm, MM aa xx ii mm uu mm

”,

BBaa cc kk lliigghhtt

feature will not work.

■

Press the

EENNEE RR GGYY SSAAVVIINNGG

button repeatedly to select the appropriate Energy Saving setup.

Select

PPIICC TT UU RR EE

Select

EEnneerr gg yy SSaavvii nn gg

ENTER

Select

OOff ff, MM iinniimm uu mm, MM eedd ii uu mm

MM aaxx ii mmuu mm

, or

SS cc rreeee nn OOffff

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

PICTURE

Enter

Move

PICTURE

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

Aspect Ratio : 16:9

Picture Wizard

Energy Saving

: Off

Picture Mode : Standard

• Backlight 70

• Contrast 90

• Brightness 50

• Sharpness 70

Off

Minimum

Medium

Maximum

Screen off

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

PICTURE RESET

Settings of the selected picture modes return to the default factory settings.

Select

PPIICC TT UU RR EE

Select

PPii cc tt uu rree RR eess ee tt

ENTER

Enter

Move

PICTURE

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

Enter

Move

PICTURE

• Contrast 50

• Brightness 50

• Sharpness 50

• Color 50

• Tint 0

• Advanced Control

• Picture Reset

Screen (RGB-PC)

Resetting video configuration...

Yes

All picture settings will be resetted. Continue?

Initialize the adjusted value.

Select

YYee ss

ENTER

EXIT

Return to TV viewing.

Select

OOPPTTIIOONN

Select

PPoowweerr II nndd ii ccaattoorr

ENTER

Select your desired options.

Select

SS ttaa nn ddbbyy LLiigghh tt

PPoowweerr LLiigghhtt

ENTER

POWER INDICATOR

For 32LD320

Adjust the power/standby indicator light of TV front.

■

SS tt aann ddbbyy LLii gghhtt

: Determines whether to set the

indicator light on the front of the TV to

OO nn

OO ff ff

in standby mode.

■

PPoowweerr LL ii gg hhtt

: Determines whether to set the

indicator light on the front of the TV to

OO nn

OOffff

when the power turns on.

Enter

Move

OPTION

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Power Indicator

Demo Mode : Off

Initial Setting : Home Use

Enter

Move

OPTION

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Power Indicator

Demo Mode : Off

Initial Setting : Home Use

Power Light

Standby Light

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Downloaded From TV-Manual.com Manuals

PICTURE CONTROL

DEMO MODE

PICTURE CONTROL

Select

OOPPTTIIOONN

Select

DDeemmoo MMoo ddee

ENTER

Select

OO nn

to show the various

feature of the TV.

ENTER

EXIT

Return to TV viewing. After a while,

DDeemmoo MMoo ddee

starts.

If you want to stop the demo, press any button (Except VOL +, - and MUTE button).

Enter

Move

OPTION

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Demo Mode : Off

Initial Setting : Store Demo

Enter

Move

OPTION

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Demo Mode : On

Initial Setting : Store Demo

Off

Displays a slide show to explain the various feature of this TV.

■

This feature is disabled in “

II nn ii ttii aa ll

SS eettttiinngg --HHoomm ee UUssee

”.

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER (AUTO VOLUME)

Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program.

Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.

Select

AAUUDDII OO

Select

AAuu ttoo VV ooll uu mmee

Select

OO nn

OOff ff

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

Enter

Move

AUDIO

Auto Volume : On

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

Off

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

CLEAR VOICE II

By differentiating the human sound range from others, it improves the sound quality of voices.

Select

AAUUDDII OO

Select

CC llee aarr VVoo iiccee IIII

Select

OO nn

OOff ff

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : On

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

Select

LLee vv eell

ENTER

Make appropriate adjustments.

ENTER

Adjustment for Clear Voice Level With selecting

OO nn

Off

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

PRESET SOUND SETTINGS (SOUND MODE)

Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content.

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

Select

AAUUDDII OO

Select

SS oouunndd MM oodd ee

Select

SS ttaanndd aarr dd, MM uu ssiicc

CC iinnee mmaa, SS pp oorr tt

, or

GGaa mmee

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

■

SS ttaanndd aarr dd, MM uu ssiicc, CC iinnee mmaa, SS pp oorr tt

and

GGaamm ee

are preset for optimum

sound quality at the factory.

■

You can also adjust

SS oouunndd MMoodd ee

the

QQ .. MM EENNUU

■

SS tt aa nn dd aa rr dd

: Offers standard-quality

sound.

■

MM uu ssiicc

: Optimizes sound for listening to

music.

■

CC iinnee mmaa

: Optimizes sound for watching

movies.

■

SS pp oorr tt

: Optimizes sound for watching

sports events.

■

GGaa mm ee

: Optimizes sound for playing

games.

Standard

Music

Cinema

Sport

Game

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

SOUND SETTING ADJUSTMENT - USER MODE

SOUND & LANGUAGE CONTROL

Adjust the sound to suit your taste and room situations.

Select

AAUUDDII OO

Select

SS oouunndd MM oodd ee

Select

TTrr eebb llee

BBaass ss

ENTER

Select

SS ttaanndd aarr dd, MM uu ssiicc

CC iinnee mmaa, SS pp oorr tt

, or

GGaa mmee

ENTER

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

• Treble 50

• Bass 50

•

Infinite Sound

Off

Make appropriate adjustments.

ENTER

-+ -+

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

INFINITE SOUND

Select

AAUUDDII OO

Select

IInnffiinn iittee SSoouunndd

Select

OO nn

OOff ff

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Select this option to sound realistic.

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

• Treble 50

• Bass 50

•

Infinite Sound

Off

-+ -+

■

If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amp to cope with different user environments.

■

If you select “

CC llee aarr VVooiicc ee IIII--OOnn

”,

IInnffiinn ii tt ee

SS oouu nn dd

feature will not work.

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

BALANCE

SOUND & LANGUAGE CONTROL

Select

AAUUDDII OO

Select

BBaa ll aannccee

Make appropriate adjustments.

ENTER

Adjust the left/right sound of speaker to suit your taste and room situations.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

Enter

Move

AUDIO

Auto Volume : Off

Clear Voice II : Off

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

Balance 0

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

TV SPEAKERS ON/OFF SETUP

Turn the TV speakers off if using external audio equipment.

Select

AAUUDDII OO

Select

TTVV SSpp eeaa kk eerr

Select

OO nn

OOff ff

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

AUDIO

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

Enter

Move

AUDIO

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

Off

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

AUDIO RESET

SOUND & LANGUAGE CONTROL

Settings of the selected Sound Mode return to the default factory settings.

Select

AAUUDDII OO

Select

RRee ssee tt

ENTER

Initialize the adjusted value.

ENTER

EXIT

Return to TV viewing.

Enter

Move

AUDIO

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

Enter

Move

AUDIO

• Level 3

Balance 0

Sound Mode : Standard

•

Infinite Sound :

Off

• Treble 50

• Bass 50

• Reset

TV Speaker : On

Resetting audio configuration...

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

STEREO/SAP BROADCAST SETUP

For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono.

Select

SS AAPP

Select

MM oonn oo, SS tteerr eeoo

, or

SS AAPP

Return to TV viewing.

Q.MENU

EXIT

Select

MM uu llttii AA uu ddiioo

Select other languages.

Return to TV viewing.

Q.MENU

EXIT

Analog TV Digital TV

English

Multi Audio

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

AUDIO LANGUAGE

SOUND & LANGUAGE CONTROL

Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode.

Select

OOPPTTIIOONN

Select

AAuu ddiioo LLaa nngguuaaggee

Select your desired language.

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

EE EE

English

Spanish

French

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

ON-SCREEN MENUS LANGUAGE SELECTION

The menus can be shown on the screen in the selected language.

Select

OOPPTTIIOONN

Select

MM eennuu LL aanngguuaa gg ee

Select your desired language. From this point on, the on-screen menus

will be shown in the selected language.

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

EE EE

English

Español

Français

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

CAPTION MODE

SOUND & LANGUAGE CONTROL

Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which was last set when you turned the power off. This function is only available when

CCaa ppttii oo nn

Mode is set

OO nn

Select

OOPPTTIIOONN

Select

CC aapp tt ii oonn

Select

OO nn

ENTER

Select

CC CC11-44

TTeexx tt11-44

Analog Broadcasting System Captions

■

When selecting

OO ff ff

, Sub-menus for Analog, DTV, and Digital Option become disabled.

■

CC AAPPTTIIOO NN

The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired.

■

TTEEXXTT

The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : CC1

Set ID : 1

Mode

CC1

Digital Option

EE EE

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

Digital Broadcasting System Captions

Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On.

Select

OOPPTTIIOONN

Select

CC aapp tt ii oonn

Select

OO nn

ENTER

Select

CC CC11-44, TTeexx tt11-44

, or

SS eerr vv ii cc ee 11- 66

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : CC1

Set ID : 1

EE EE

Mode

CC1

Digital Option

Downloaded From TV-Manual.com Manuals

SOUND & LANGUAGE CONTROL

Caption Option

Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On.

Select

OOPPTTIIOONN

Select

CC aapp tt ii oonn

Select

OO nn

ENTER

Select

CC uu ssttoo mm

ENTER

Customize the

SS ii zz ee, FF oo nn tt

, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language.

Select

DDii gg iitt aall OO ppttii oonn

Size

A Standard

Font

Font 1

Text Color

White

Text Opacity

Solid

Edge Type

None

Edge Color

Black

Bg Color

Black

Bg Opacity

Solid

Custom

■

SS ii zz ee

: Set the word size.

■

FF oo nn tt

: Select a typeface for the text.

■

TTeexx tt CC oolloorr

: Choose a color for the

text.

■

TTeexx tt OOpp aacciittyy

: Specify the opacity

for the text color.

■

BBgg (( BB aacckkggrroo uu nndd)) CC ooll oorr

: Select a

background color.

■

BBgg (( BB aacckkggrroo uu nndd)) OOpp aaccii ttyy

: Select

the opacity for the background color.

■

EEdd gg ee TT yy ppee

: Select an edge type.

■

EEdd gg ee CCooll oorr

: Select a color for the

edges.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : Off

Set ID : 1

Enter

Move

OPTION

Menu Language : English

Audio Language : English

Input Label

SIMPLINK : On

Key Lock : Off

Simple Manual

Caption : CC1

Set ID : 1

EE EE

Mode

CC1

Digital Option

Downloaded From TV-Manual.com Manuals

TIME SETTING

CLOCK SETTING

TIME SETTING

Auto Clock Setup

The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.

Select

TTII MMEE

Select

CC lloo cc kk

Select

AAuutt oo

ENTER

Select your viewing area time zone.

• U.S.A:

EE aa sstt ee rrnn, CC ee nn ttrr aa ll, MM oo uu nntt aa ii nn

PPaa cciiffii cc, AAll aass kk aa

, or

HHaa wwaa iiii

• Canada:

EEaa sstt eerr nn, CC eennttrr aall, MM oouunnttaaii nn

PPaa cciiffii cc, NNeeww FF.. llaann dd

, or

AAttll aannttiicc

Select

AAuuttoo, OOff ff

, or

OO nn

(depending on whether or not your viewing area observes Daylight Saving time).

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Month

Date

Year

2009

Hour

10 AM

Minute

Time Zone

Eastern

Daylight Saving

Auto

Downloaded From TV-Manual.com Manuals

TIME SETTING

Manual Clock Setup

If the current time setting is wrong, reset the clock manually.

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Select

TTII MMEE

Select

CC lloo cc kk

Select

MM aannuu aall

ENTER

Select the Year, Month, Date, Hour, or Minutes option.

Set the Year, Month, Date, Hour, or Minutes option.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Month

Date

Year

2009

Hour

10 AM

Minute

Time Zone

Eastern

Daylight Saving

Auto

Manual

Downloaded From TV-Manual.com Manuals

TIME SETTING

AUTO ON/OFF TIME SETTING

This function operates only if the current time has been set. The

OOff ff TTiimmee

function overrides the

OOnn TTii mm ee

function if they are both set to the same time.

The TV must be in standby mode for the

OOnn TTii mm ee

to work.

If you do not press any button within 2 hours after the TV turns on with the

OOnn TTiimmee

function, the TV will

automatically revert to standby mode.

■

To cancel

OOnn// OO ff ff TTii mmee

function, select

OOff ff

■

Only for On Time function

Select

II nn ppuutt

Select the desired input source.

Select

TTII MMEE

Select

OOffff TT iimmee

OOnn TT ii mmee

Select

RRee ppee aatt

ENTER

Select

OOff ff, OOnnccee, DDaa ii llyy, MM oonn ..~FF rrii..

MM oonn ..~SS aa tt.., SS aa tt..~ SS uunn..

, or

SS uunn..

Select and set

HHoo uu rr

MM iinnuuttee

ENTER

When Selecting

TT VV

set the channel at turn-on.

Adjust to sound level at turn-on.

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Enter

Move

TIME

Clock

Off Time : Off

On Time : 6:30 AM (Once)

Sleep Timer : Off

Repeat

Once

Hour

6 AM

Minute

Input

Channel

TV 2-0

Volume

Feb. 21, 2009 10:10 AM

Downloaded From TV-Manual.com Manuals

TIME SETTING

SLEEP TIMER SETTING

TIME SETTING

The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.

■

To cancel the

SS ll eeeepp TT ii mmeerr

, select

OOff ff

■

You can also adjust

SS ll eeeepp TTiimmee rr

the

QQ .. MM EENNUU

Select

TTII MMEE

Select

SS ll eeeepp TTiimmee rr

Make appropriate adjustments.

ENTER

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Enter

Move

TIME

Clock

Off Time : Off

On Time : Off

Sleep Timer : Off

Off

10 min.

20 min.

30 min.

60 min.

90 min.

120 min.

180 min.

240 min.

Downloaded From TV-Manual.com Manuals

PARENTAL CONTROL / RATING

PARENTAL CONTROL / RATINGS

Parental Control can be used to block specific channels, ratings and other viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done :

1. Set ratings and categories to be blocked.

2. Specify a password

3. Enable the lock

V-Chip rating and categories

Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-tovideo movies use the Movie Rating System (MPAA)only.

Ratings for Television programs including made-for-TV movies:

■

TV-G(General audience

)

■

TV-PG(Parental guidance suggested

)

■

TV-14(Parents strongly cautioned

)

■

TV-MA (Mature audience only

)

■

TV-Y(All children

)

■

TV-Y7(Children 7 years older

)

Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu.

Setting up Your Password

For USA For Canada

Enter Password

* * * *

Select

LLOO CCKK

ENTER

Input the password.

123

4506

789

■

Enter the password as requested.

■

The TV is set up with the initial password “0-0-0-0”.

SET PASSWORD & LOCK SYSTEM

Enter

Move

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

LOCK

Enter

Move

Lock System : Off

Set Password

Block Channel

TV Rating-English

TV Rating-French

Downloadable Rating

Input Block

LOCK

Downloaded From TV-Manual.com Manuals

PARENTAL CONTROL / RATING

PARENTAL CONTROL / RATINGS

Enables or disables the blocking scheme you set up previously.

Lock System

Select

LLoo cckk SS yysstt ee mm

Select

OO nn

OOff ff

ENTER

■

When you select

OO nn

, the Lock System

is enable.

Select

LLOO CCKK

ENTER

Input the password.

123

4506

789

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : On

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Off

Downloaded From TV-Manual.com Manuals

PARENTAL CONTROL / RATING

Change the password by inputting a new password twice.

Set Password

Select

SS eett PP aasssswwoo rrdd

Choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter

the same 4 digits on the

CC oonn ff iirr mm

ENTER

123

4506

789

Select

LLOO CCKK

ENTER

Input the password.

123

4506

789

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

New

* * * *

Confirm

* * * *

Downloaded From TV-Manual.com Manuals

PARENTAL CONTROL / RATING

100

CHANNEL BLOCKING

PARENTAL CONTROL / RATINGS

Blocks any channels that you do not want to watch or that you do not want your children to watch.

Select

BBll oocckk CChh aannnneell

Select a channel to block or unblock.

ENTER

Select

LLOO CCKK

ENTER

Input the password.

123

4506

789

BACK

Return to the previous menu.

EXIT

Return to TV viewing.

Enter

Move

LOCK

Lock System : Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Downloadable Rating

Input Block

Ch. Change

Page Change

Navigation

Block/Unblock

■

If a channel is locked, enter the password to unlocked it temporarily.

Block or unblock a channel.

GREEN

Downloaded From TV-Manual.com Manuals

LG Electronics 19LD350C, 22LD350C User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

WARNING / CAUTION

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

CONTENTS

FEATURE OF THIS TV

PREPARATION

ACCESSORIES

FRONT PANEL INFORMATION

BACK PANEL INFORMATION

STAND INSTRUCTIONS (For 19/22LD350, 19/22LD350C)

STAND INSTRUCTIONS (For 32LD320)

VESA WALL MOUNTING

CABLE MANAGEMENT

DESKTOP PEDESTAL INSTALLATION

SWIVEL STAND (Except 19/22LD350, 19/22LD350C)

POSITIONING YOUR DISPLAY (For 19/22LD350, 19/22LD350C)

ATTACHING THE TV TO A DESK (Except 19/22LD350, 19/22LD350C)

KENSINGTON SECURITY SYSTEM

SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND

ANTENNA OR CABLE CONNECTION

EXTERNAL EQUIPMENT SETUP

HD RECEIVER SETUP

Component Connection

HDMI Connection

DVI to HDMI Connection

DVD SETUP

Component Connection

Composite (RCA) Connection

HDMI Connection

VCR SETUP

Antenna Connection

Composite (RCA) Connection

OTHER A/V SOURCE SETUP

USB CONNECTION (For 32LD350, 32LD320)

AUDIO OUT CONNECTION

HEADPHONE SETUP

PC SETUP

VGA (D-Sub 15 pin) Connection

DVI to HDMI Connection

Screen Setup for PC mode

WATCHING TV / CHANNEL CONTROL

REMOTE CONTROL FUNCTIONS

Installing Batteries

TURNING ON THE TV

VOLUME ADJUSTMENT

CHANNEL SELECTION

INITIAL SETTING

ON-SCREEN MENUS SELECTION

QUICK MENU

CHANNEL SETUP

Auto Scan (Auto Tuning)

Add/Delete Channel (Manual Tuning)

Channel Editing

CHANNEL LIST

FAVORITE CHANNEL SETUP

FAVORITE CHANNEL LIST

BRIEF INFORMATION

INPUT LIST

INPUT LABEL

AV MODE

SIMPLE MANUAL

KEY LOCK

SIMPLINK : On

SIMPLINK Menu

SIMPLINK Functions

ENTRY MODES

USB (For 32LD350, 32LD320)

PHOTO LIST

Screen Components

Photo Selection and Popup Menu

Full Screen Menu

MUSIC LIST

Screen Components

Music Selection and Popup Menu

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL