For more information about the following items, see the “Owner’s Manual”.
Air conditioning
Energy monitor (NX300h only)
Fuel consumption
Vehicle customization settings
Intuitive parking assist
11
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
Introduction
NAVIGATION SYSTEM OWNER’S MANUAL
This manual explains the operation of the Navigation System. Please read this manual
carefully to ensure proper use. Keep this manual in your vehicle at all times.
The screen shots in this document and the actual screens of the navigation system differ depending on whether the functions and/or a contract existed and the map data
available at the time of producing this document.
Please be aware that the content of this manual may be different from the navigation
system in some cases, such as when the system’s software is updated.
NAVIGATION SYSTEM
The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global Positioning
System (GPS) operated by the U.S. Department of Defense. Using these signals and
other vehicle sensors, the system indicates your present position and assists in locating
a desired destination.
The navigation system is designed to select efficient routes from your present starting
location to your destination. The system is also designed to direct you to a destination
that is unfamiliar to you in an efficient manner. The system uses DENSO maps. The calculated routes may not be the shortest nor the least traffic congested. Your own personal local knowledge or “short cut” may at times be faster than the calculated routes.
The navigation system’s database includes Point of Interest categories to allow you to
easily select destinations such as restaurants and hotels. If a destination is not in the database, you can enter the street address or a major intersection close to it and the system will guide you there.
The system will provide both a visual map and audio instructions. The audio instructions
will announce the distance remaining and the direction to turn in when approaching an
intersection. These voice instructions will help you keep your eyes on the road and are
timed to provide enough time to allow you to maneuver, change lanes or slow down.
Please be aware that all current vehicle navigation systems have certain limitations that
may affect their ability to perform properly. The accuracy of the vehicle’s position depends on satellite conditions, road configuration, vehicle condition or other circumstances. For more information on the limitations of the system, refer to page 159.
2
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
IMPORTANT INFORMATION ABOUT THIS MANUAL
WARNING
NOTICE
For safety reasons, this manual indicates items requiring particular attention with the
following marks.
● This is a warning against anything which may cause injury to people if the warning is
ignored. You are informed about what you must or must not do in order to reduce the risk of
injury to yourself and others.
● This is a warning against anything which may cause damage to the vehicle or its equipment
if the warning is ignored. You are informed about what you must or must not do in order to
avoid or reduce the risk of damage to your vehicle and its equipment.
SYMBOLS USED IN ILLUSTRATIONS
Safety symbol
The symbol of a circle with a slash through it means “Do not”, “Do not do
this” or “Do not let this happen”.
Arrows indicating operations
Indicates the action (pushing, turning, etc.)
used to operate switches and other devices.
3
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
HOW TO READ THIS MANUAL
No.NameDescription
Operational
Outlines
Main OperationsThe steps of an operation are explained.
Related OperationsA main operation’s supplementary operations are described.
InformationUseful information for the user is described.
An outline of the operation is explained.
■ INFORMATION FOR HYBRID VEHICLES IS WRITTEN IN BRACKETS
NEXT TO THE INFORMATION FOR GASOLINE VEHICLES
Different writing styles for gasoline and hybrid vehicles
Example
When the engine
*1 <power>*2 switch is in ACCESSORY or IGNITION ON*
<ON>*2 mode, the initial screen will be displayed and the system will begin
operating.
1
: Vehicles with gasoline engine
*
2
: Vehicles with hybrid system
*
1
4
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
SAFETY INSTRUCTION
WARNING
To use this system in the safest possible
manner, follow all the safety tips shown below.
This system is intended to assist in reaching
the destination and, if used properly, can do
so. The driver is solely responsible for the
safe operation of your vehicle and the safety
of your passengers.
Do not use any feature of this system to the
extent it becomes a distraction and prevents safe driving. The first priority while
driving should always be the safe operation
of the vehicle. While driving, be sure to observe all traffic regulations.
Prior to the actual use of this system, learn
how to use it and become thoroughly familiar with it. Read the entire Navigation System Owner’s Manual to make sure you
understand the system. Do not allow other
people to use this system until they have
read and understood the instructions in this
manual.
For your safety, some functions may become inoperable when driving. Unavailable
screen buttons are dimmed. Only when the
vehicle is not moving, can the destination
and route selection be done.
● For safety, the driver should not operate
the navigation system while he/she is
driving. Insufficient attention to the road
and traffic may cause an accident.
● While driving, be sure to obey the traffic
regulations and maintain awareness of
the road conditions. If a traffic sign on the
road has been changed, route guidance
may not have the updated information
such as the direction of a one way street.
While driving, listen to the voice instructions
as much as possible and glance at the
screen briefly and only when it is safe. However, do not totally rely on voice guidance.
Use it just for reference. If the system cannot determine the current position correctly, there is a possibility of incorrect, late, or
non-voice guidance.
The data in the system may occasionally be
incomplete. Road conditions, including
driving restrictions (no left turns, street closures, etc.) frequently change. Therefore,
before following any instructions from the
system, look to see whether the instruction
can be done safely and legally.
This system cannot warn about such things
as the safety of an area, condition of streets,
and availability of emergency services. If unsure about the safety of an area, do not drive
into it. Under no circumstances is this system a substitute for the driver’s personal
judgement.
Use this system only in locations where it is
legal to do so. Some states/provinces may
have laws prohibiting the use of video and
navigation screens next to the driver.
1. FUNCTION INDEX .................................. 30
5
6
7
8
9
9
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
1. BASIC FUNCTION
1. Remote Touch
10
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
1. BASIC FUNCTION
No.NameFunctionPage
“HOME” buttonPress to display the home screen.14, 39
“MENU” buttonPress to display the “Menu” screen.12
Back buttonPress to display the previous screen.36
Slide your finger on the touchpad and move the
pointer to select a function, letter and screen button.
Touchpad
Press the touchpad to enter the selected function,
letter or screen button.
36
Certain finger movements on the touchpad can
perform functions, such as changing map scalings
and scrolling list screens.
1
QUICK GUIDE
11
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
1. BASIC FUNCTION
2. “Menu” SCREEN
Press the “MENU” button on the Remote Touch to display the “Menu” screen.
12
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
1. BASIC FUNCTION
No.FunctionPage
Select to display the air conditioning control screen.
“Own er’s
Manual”
Select to display the map screen.82
Select to display the “LEXUS App Suite” screen.352
Select to display the “Information” screen.20
Select to display the radio control screen.
166
Select to display the media control screen.
Select to display the hands-free operation screen.296
Select to display the “Setup” screen.18
Select to adjust the contrast and brightness of the screens, turn the
screen off, etc.
45
1
QUICK GUIDE
13
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
1. BASIC FUNCTION
3. HOME SCREEN
Press the “HOME” button on the Remote Touch to display the home screen.
The home screen can display multiple information screens, such as the navigation sys-
tem screen, audio system screen and fuel consumption screen, simultaneously. When
a screen is selected, the selected screen is switched to a full-screen display. The home
screen can be set to either a three-way split screen or a two-way split screen.
For details about setting the home screen: P.39
Three-way split screen
14
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
1. BASIC FUNCTION
Two-way split screen
No.FunctionPage
Displays the condition of the Bluetooth® connection16
Select to change the display items/area and the home screen layout.39
1
QUICK GUIDE
15
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
1. BASIC FUNCTION
STATUS DISPLAY
The condition of the Bluetooth® connection, as well as the level of reception and the
amount of cellular phone battery charge left, are displayed on the status bar. This status
bar is always shown on all modes.
No.IndicatorsConditions
(Gray) (Blue)
No connection Poor Good
®
connection is built into the instru-
The condition of
the Bluetooth
connection
An antenna for the Bluetooth
ment panel. The condition of the Bluetooth
deteriorate and the system may not function when a Bluetooth
®
phone is used in the following conditions and/or places:
The cellular phone is obstructed by certain objects (such as when
it is behind the seat or in the glove box or console box).
The cellular phone is touching or is covered with metal materials.
®
Leave the Bluetooth
Bluetooth
16
®
connection is good.
phone in a place where the condition of the
®
connection may
®
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
1. BASIC FUNCTION
No.IndicatorsConditions
Poor Excellent
The level of reception does not always correspond with the level
displayed on the cellular phone. The level of reception may not be
The level of
reception
displayed depending on the phone you have.
When the cellular phone is out of the service area or in a place
inaccessible by radio waves, “No Service” is displayed.
“Rm” is displayed when receiving in a roaming area. While roam-
ing, display “Rm” top-left on the icon.
The receiving area may not be displayed depending on the type of
phone you have.
The amount of
battery charge
left
Empty Full
The amount displayed does not always correspond with the
amount displayed on the Bluetooth
®
The amount of battery charge left may not be displayed depending
®
on the type of the Bluetooth
device connected.
This system does not have a charging function.
1
QUICK GUIDE
device.
17
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
2. QUICK REFERENCE
1. “Setup” SCREEN
The items shown on the “Setup” screen can be set. Press the “MENU” button on the
Remote Touch, then select “Setup” to display the “Setup” screen.
18
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
2. QUICK REFERENCE
No.FunctionPage
Select to change the selected language, operation sound, automatic
screen change settings, etc.
66
Select to set the voice guidance settings.73
Select to set Bluetooth® phones and Bluetooth® audio devices.56
Select to set radio and external media settings.237
Select to set traffic information.156
Select to set memory points (home, preset destinations, address book
entries, areas to avoid), navigation details or to delete previous destina-
138, 150
tions.
Select to set vehicle information such as maintenance information.75
Select to set the phone sound, contacts, message settings, etc.318
Select to set LEXUS App Suite settings.372
Select to set data services settings.276
1
QUICK GUIDE
19
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
2. QUICK REFERENCE
2. “Information” SCREEN
This screen can be used to display traffic information, fuel consumption, etc. Press the
“MENU” button on the Remote Touch, then select “Info” to display the “Information”
screen.
20
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
2. QUICK REFERENCE
No.FunctionPage
Select to display the fuel consumption screen.
“Own er’s
Manual”
Select to display traffic information.100
Select to display weather information.274
Select to display the “LEXUS Insider” screen.368
1
QUICK GUIDE
21
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
3. NAVIGATION OPERATION
1
2
345
6
1. REGISTERING HOME
Press the “MENU” button on the
Remote Touch.
Select “Nav”.
Select “Dest.”.
Select “Go Home”.
Select “Yes”.
There are different kinds of methods to search for your home.
(P.105)
22
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
3. NAVIGATION OPERATION
7
8
Select “Enter”.
Select “OK”.
Registration of home is complete.
Registering home in a different way
P.139
Editing the name, location, phone num-
ber and icon
P.140
Setting home as the destination
P.109
1
QUICK GUIDE
23
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
3. NAVIGATION OPERATION
1
2
345
6
2. REGISTERING PRESET DESTINATIONS
Press the “MENU” button on the
Remote Touch.
Select “Nav”.
Select “Dest.”.
Select one of the preset destination
buttons.
Select “Yes”.
There are different kinds of methods to search for a destination.
(P.105)
24
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
3. NAVIGATION OPERATION
7
8
Select “Enter”.
Select “OK”.
Registration of preset destinations is complete.
Registering preset destinations in a dif-
ferent way
P.141
Editing the name, location, phone num-
ber and icon
P.142
Setting preset destinations as the desti-
nation
P.109
1
QUICK GUIDE
25
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
3. NAVIGATION OPERATION
1
2
3
4
5
3. OPERATION FLOW: GUIDING THE ROUTE
Press the “MENU” button on the
Remote Touch.
Select “Nav”.
Select “Dest.”.
There are different kinds of methods to search for a destination.
(P.105)
Select “Go”.
26
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
3. NAVIGATION OPERATION
6
Select “OK”.
Selecting routes other than the one recommended (P.121)
Guidance to the destination is displayed
on the screen and can be heard via voice
guidance.
1
QUICK GUIDE
27
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
3. NAVIGATION OPERATION
123
4
4. SETTING HOME AS THE DESTINATION
Press the “MENU” button on the
Remote Touch.
Select “Nav”.
Select “Dest.”.
Select “Go Home”.
28
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
3. NAVIGATION OPERATION
5
Select “OK”.
Selecting routes other than the one recommended (P.121)
Guidance to the destination is displayed
on the screen and can be heard via voice
guidance.
1
QUICK GUIDE
29
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
4. FUNCTION INDEX
1. FUNCTION INDEX
Map
Displaying mapsPage
Viewing the map screen82
Displaying the current position85
Viewing the current position vicinity map91
Changing the scale86
Changing the map orientation88
Displaying map Information93
Displaying the estimated travel/arrival time to the destination126
Selecting the map mode89
Displaying traffic information100
Searching for destinationsPage
Searching for the destination107
Changing the search area108
Route guidance
Before starting or during route guidancePage
Starting route guidance121
Editing the route133
Viewing the entire route map127
Pausing guidance124
Adjusting route guidance volume73
Deleting the destination135
Address bookPage
Registering address book entries143
Marking icons on the map144
30
NX300h/NX200t_Navi_OM78025U_(U)
14.09.10 09:52
Loading...
+ 366 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.