Tips for printing.......................................................................................................................................33
Tips for copying.......................................................................................................................................48
Making copies.........................................................................................................................................48
Copying an ID card...................................................................................................................................49
Enlarging or reducing images..................................................................................................................49
Tips for scanning......................................................................................................................................54
Scanning to a local computer..................................................................................................................54
Scanning to a network computer............................................................................................................55
Scanning to a flash drive or memory card...............................................................................................55
Scanning photos for editing.................................................................................................... ................56
Scanning documents for editing..............................................................................................................56
Scanning directly to e‑mail using the printer software...........................................................................57
Scanning to a PDF....................................................................................................................................58
Setting up the printer to fax....................................................................................................................63
Configuring the fax settings.....................................................................................................................74
Creating a contact list..............................................................................................................................76
Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.
Do not place or use this product near water or wet locations.
CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced. There is a
danger of explosion if a lithium battery is incorrectly replaced. Do not recharge, disassemble, or incinerate a
lithium battery. Discard used lithium batteries according to the manufacturer's instructions and local
regulations.
Use only the power supply and power cord provided with this product or the manufacturer's authorized replacements.
CAUTION—POTENTIAL INJURY: To reduce risk of fire, use only the telecommunications (RJ‑11) cord provided
with this product or a UL Listed 26 AWG or larger replacement when connecting this product to the public
switched telephone network.
CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system
connections) are properly installed in their marked plug-in ports.
This product is designed, tested, and approved to meet strict global safety standards with the use of specific
manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not
responsible for the use of other replacement parts.
CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power cord. Do not
subject the power cord to abrasion or stress. Do not pinch the power cord between objects such as furniture
and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect the power cord regularly
for signs of such problems. Remove the power cord from the electrical outlet before inspecting it.
Refer service or repairs, other than those described in the user documentation, to a professional service person.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug
the power cord from the wall outlet and disconnect all cables from the printer before proceeding.
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or
make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning
storm.
SAVE THESE INSTRUCTIONS.
About your printer7
About your printer
Thank you for choosing this printer!
We've worked hard to make sure it will meet your needs.
To start using your new printer right away, use the setup materials that came with the printer, and then skim the User’sGuide to learn how to perform basic tasks. To get the most out of your printer, read the User’s Guide carefully, and
make sure you check the latest updates on our Web site.
We're committed to delivering performance and value with our printers, and we want to make sure you're satisfied. If
you do encounter any problems along the way, one of our knowledgeable support representatives will be delighted to
help you get back on track fast. And if you find something we could do better, please let us know. After all, you are the
reason we do what we do, and your suggestions help us do it better.
Minimizing your printer's environmental impact
We are committed to protecting the environment and are continually improving our printers to reduce their
environmental impact. By selecting certain printer settings or tasks, you may be able to reduce your printer's
environmental impact even further.
Conserving energy
• Activate Eco-Mode. This feature sets the screen brightness to low and sets the printer to change to Sleep mode
after the printer is left idle for 10 minutes.
• Select the lowest Sleep timeout. The Sleep feature puts the printer in a minimum‑power standby mode after the
printer has been idle for a set amount of time (the Sleep timeout).
• Share your printer. Wireless/network printers allow you to share a single printer among multiple computers, thus
conserving energy and other resources.
Conserving paper
• Print more than one page image on one side of the paper. The Pages per Sheet feature allows you to print multiple
pages on one sheet. You can print up to 16 page images on one side of a sheet of paper.
• Print on both sides of the paper. Duplexing lets you print on both sides of the paper manually or automatically
(depending on your printer model).
• Preview print jobs before printing. Use the preview features found in Toolbars, the Print or Print Preview dialog,
or the printer display (depending on your printer model).
• Use recycled paper.
• Reduce the margins of documents to be printed.
• Scan and save. To avoid printing multiple copies, you can scan documents or photographs and save them to a
computer program, application, or flash drive for presentation.
About your printer8
Conserving ink
• Use Quick Print or Draft Mode. These modes can be used to print documents using less ink than normal and are
ideal for printing documents that are mostly text.
• Use font types and font settings that requires less ink. Most programs or applications let you adjust the darkness
of the colors.
• Use high yield cartridges. Inks in high yield cartridges allow you to print more pages.
Recycling
• Return ink cartridges for reuse or recycling through the Lexmark Cartridge Collection Program. To return an ink
cartridge, go to www.lexmark.com/recycle. Follow the instructions to request a postage‑paid bag.
• Recycle the product packaging.
• Recycle your old printer instead of throwing it away.
• Recycle paper from discarded print jobs.
• Use recycled paper.
To read the Lexmark Environmental Sustainability Report, see www.lexmark.com/environment.
Note: Your printer may not come with some of these programs or some of the functions of these programs,
depending on the features of the printer that you purchased.
Finding information about the printer
Publications
What are you looking for?Find it here
Initial setup instructions:
• Connecting the printer
• Installing the printer software
Setup documentation
The setup documentation came with the printer and is
also available on the Lexmark Web site at
http://support.lexmark.com.
About your printer9
What are you looking for?Find it here
Additional setup and instructions for using the printer:
• Selecting and storing paper and specialty media
• Loading paper
User's Guide
The User's Guide is available on the installation software
CD.
• Performing printing, copying, scanning, and faxing tasks,
depending on your printer model
• Configuring printer settings
• Viewing and printing documents and photos
• Setting up and using printer software
• Setting up and configuring the printer on a network,
depending on your printer model
For updates, check our Web site at
http://support.lexmark.com.
• Caring for and maintaining the printer
• Troubleshooting and solving problems
Creating and customizing printer solutions, depending on your
printer model
Help using the printer softwareWindows or Mac Help
SmartSolutions User's Guide and Help
Go to http://smartsolutions.lexmark.com. Click HELP to
view basic SmartSolutions information.
Open a printer software program or application, and
then click Help.
?
Click
to view context‑sensitive information.
The latest supplemental information, updates, and online
technical support:
• Troubleshooting hints and tips
• Frequently asked questions
• Documentation
• Driver downloads
• Live chat support
• E‑mail support
Notes:
• The Help installs automatically with the printer
software.
• The printer software is located in the printer
program folder or on the desktop, depending on
your operating system.
Lexmark Support Web site—
http://support.lexmark.com
Note: Select your region, and then select your product
to view the appropriate support site.
Record the following information (located on the store
receipt and on the label inside the printer), and have it
ready when you contact customer support so that they
may serve you faster:
• MAC address number
• Serial number
• Date purchased
• Store where purchased
Note: Lift the scanner cover to see the customer
support label.
Support telephone numbers and hours of operation for
your region or country can be found on the Support Web
site (http://support.lexmark.com) or on the printed
warranty that came with your printer.
Warranty information
• In the US—See the Statement of Limited Warranty
included with this printer, or at
http://support.lexmark.com.
• In other countries or regions—See the printed
warranty that came with your printer.
Note: Your printer may not come with some of these programs or some of the functions of these programs,
depending on the features of the printer that you purchased.
Understanding the parts of the printer
3
4
2
1
5
13
12
11
Use theTo
1Automatic Document Feeder
(ADF)
2Paper feed guardPrevent items from falling into the paper slot.
Scan, copy, or fax multiple‑page letter‑, legal‑, and A4‑size documents.
10
9
6
7
8
About your printer11
Use theTo
3Paper guidesKeep paper straight when feeding.
4Paper supportLoad paper.
5Paper guide adjustment lever Adjust the paper guides.
6ADF exit trayHold documents as they exit from the ADF.
7ADF exit tray extensionCatch legal‑size paper as it exits from the ADF.
8ADF trayLoad original documents into the ADF.
Notes:
• Use the ADF for scanning, copying, or faxing multiple‑page documents.
• Do not load postcards, photos, small items, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
9Printer control panelOperate the printer.
10Paper exit trayHold paper as it exits.
11Tray extensionKeep paper in place as it exits.
12PictBridge and USB portConnect a PictBridge-enabled digital camera or a flash drive to the printer.
13ADF paper guideKeep paper straight when feeding it into the ADF.
Note: Adjust the paper guide on the ADF tray to the width of the original
document.
14
15
24
23
22
21
16
19
20
17
18
Use theTo
14Scanner coverAccess the scanner glass.
15Scanner glassScan or copy photos and documents.
16EXT port
Connect additional devices (telephone or answering machine) to the printer and the
telephone line. Use this port if you do not have a dedicated fax line for the printer, and
if this connection method is supported in your country or region.
Note: Remove the plug to access the port.
About your printer12
Use theTo
17USB portConnect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable or installation cable.
18LINE port
19Power supply with portConnect the printer to the power cord.
20Duplex unit
Connect the printer to an active telephone line through a standard wall jack (RJ‑11), DSL
filter, or VoIP adapter, or any other adapter that allows you to access the phone line to
send and receive faxes.
• Print on both sides of a sheet of paper.
• Clear paper jams.
21Printhead access areaInstall the printhead.
Note: The carrier moves to the printhead access area when no printhead is installed in
the printer.
22Jam clearance coverAccess and clear paper jams.
23Ink cartridge access area Install, replace, or remove ink cartridges.
24Scanner unit
• Access the ink cartridges and printhead.
• Clear paper jams.
Ordering and replacing supplies13
Ordering and replacing supplies
Ordering ink cartridges
Lexmark S410 Series models (except Lexmark S419)
Item
Black cartridge150Not available
High‑yield black cartridge150XL150XLA
Yellow color cartridge150Not available
High‑yield yellow color cartridge150XL150XLA
Cyan color cartridge150Not available
High‑yield cyan color cartridge150XL150XLA
Magenta color cartridge150Not available
High‑yield magenta color cartridge150XL150XLA
1
Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling.
2
Available only on the Lexmark Web site at www.lexmark.com.
Return Program cartridge
1
Regular cartridge
2
Lexmark S419 models
Item
Black cartridge160Not available
High‑yield black cartridge160XL160XLA
Return Program cartridge
1
Regular cartridge
2
Yellow color cartridge160Not available
High‑yield yellow color cartridge160XL160XLA
Cyan color cartridge160Not available
High‑yield cyan color cartridge160XL160XLA
Magenta color cartridge160Not available
High‑yield magenta color cartridge160XL160XLA
1
Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or recycling.
2
Available only on the Lexmark Web site at www.lexmark.com.
Notes:
• To get more ink, order high‑yield ink cartridges.
• Depending on your country or region, you may get the ink cartridges individually or in multiple packs.
• You can order a mix of standard ink cartridges and high‑yield ink cartridges, depending on your needs.
• For page yield information, visit www.lexmark.com/yields.
• The cartridges used for printing documents can also be used for printing photos.
Ordering and replacing supplies14
• For best results, use only genuine Lexmark ink cartridges.
Using genuine Lexmark ink cartridges
Lexmark printers, ink cartridges, and photo paper are designed to perform together for superior print quality, and our
inks are formulated to work with your printer and help extend the life of your product. We recommend that you use
only genuine Lexmark ink cartridges.
Lexmark's warranty does not cover damage caused by non-Lexmark ink or ink cartridges.
Replacing ink cartridges
Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately
after removing the old ones, or the ink remaining in the printhead nozzles may dry out.
Removing ink cartridges
1 Turn on your printer.
2 Open the printer.
Note: The printhead moves to the cartridge installation position.
3 Press the release tab, and then remove the used ink cartridge or cartridges.
1
2
Ordering and replacing supplies15
Installing ink cartridges
1 Remove the ink cartridge from the pack, and then remove the protective cap from the ink cartridge.
If your ink cartridge comes with a twist cap, then remove the cap.
123
2 Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place.
3
1
2
Notes:
• Insert the color cartridges first, and then the black cartridge.
• Insert the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air.
3 Close the printer.
Ordering paper and other supplies
To order supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.
ItemPart Number
USB cable1021294
For more information, go to www.lexmark.com.
Ordering and replacing supplies16
PaperPaper size
Lexmark Photo Paper
• Letter
• A4
• 4 x 6 in.
• L
Lexmark PerfectFinish Photo Paper
• Letter
• A4
• 4 x 6 in.
• L
Notes:
• Availability may vary by country or region.
• For best results when printing photos or other high-quality images, use Lexmark Photo Paper or Lexmark
PerfectFinish
TM
Photo Paper.
• For more information, go to www.lexmark.com
Recycling Lexmark products
To return Lexmark products for recycling:
1 Visit our Web site at www.lexmark.com/recycle.
2 Find the product type you want to recycle, and then select your country or region from the list.
3 Follow the instructions on the computer screen.
Note: Printer supplies and hardware not listed in a Lexmark collection program may be recycled through your local
recycling center. Contact your local recycling center to determine the items they accept.
Using the printer control panel buttons and menus17
Using the printer control panel buttons and menus
Replacing the language sheet
A language sheet is used to label buttons on the printer control panel. Language sheets can be replaced anytime,
depending on which language you want to use. Some languages are available only in select printer models.
Note: Your printer comes with a preinstalled English language sheet, depending on your country or region.
1 Remove the language sheet from the documentation folder that came with the printer.
2 If necessary, insert the paper exit tray into the printer.
3 Press the latch under the printer control panel to release it, and then push the panel back to its shipping position.
1
2
4 Open the printer.
5 Remove the language sheet holder from the printer control panel.
1
xxxx xx
xxxxxxxx
xxxx xx xxxxx
xxxxxxxx
xxxx xx
xxxxxxxx
xxxx xx xxxxx
xxxxxxxx
2
6 Insert the preferred language sheet into the language sheet holder, and then attach the language sheet holder to
the printer control panel.
xxxx xx
xxxxxxxx
xxxx xx xxxxx
xxxxxxxx
xxxx xx
xxxxxxxx
xxxx xx xxxxx
xxxxxxxx
1
2
Using the printer control panel buttons and menus18
7 Raise the printer control panel until it clicks into place.
8 Close the printer, and then fully extend the paper exit tray.
Using the printer control panel
UseTo
1Power
2Display
Note: The display is
turned off in Sleep
mode.
1
2
• Turn the printer on and off.
• Switch to Sleep mode.
Note: When the printer is on, press
for three seconds to turn off the printer.
View:
• Printer status
• Messages
• Menus
3
7
to switch to Sleep mode. Press and hold
4
6
5
3Arrow buttonsNavigate through menu items that appear on the display.
4Home
Return to the home screen.
Using the printer control panel buttons and menus19
UseTo
5KeypadIn Copy mode or Photo mode:
Enter the number of copies or prints you want to make.
In Fax mode:
• Enter fax numbers.
• Operate an automated answering system.
• Select letters when creating a Speed Dial list.
• Type numbers to enter or edit the date and time shown on the display.
6Back
7Select
OK
11
10
• Return to the previous screen.
• Exit from one menu level to a higher one.
• Select menu options.
• Save settings.
12
9
8
13
14
UseTo
8Redial
9Pause
10Dial Tone
17
15
16
Display the last number dialed. Press the left or right arrow button to view the last five numbers
dialed.
Insert a three-second pause in a fax number to wait for an outside line or get through an automated
answering system. Enter a pause only when you have already begun entering the number.
Dial the telephone number manually using the keypad before sending the fax.
Using the printer control panel buttons and menus20
UseTo
11Address Book
12Color
13Black
14Start
15Cancel
16Wi‑Fi indicator
17Eco‑Mode
Access fax numbers from a saved list of numbers.
Switch to color mode.
Switch to black‑and‑white mode.
Start a job, depending on which mode is selected.
• Cancel a print, copy, scan, or fax job in progress.
• Clear current settings or error messages, and return to previous settings.
Check the wireless status of your printer.
• Change to Sleep mode after the printer is left idle for 10 minutes.
• Reduce the screen brightness.
Changing the Sleep timeout
The Sleep timeout is the time it takes for the printer to switch to Sleep mode when the printer is left idle. The Sleep
feature optimizes energy efficiency by reducing the printer power consumption. To save the most energy, select the
lowest Sleep timeout.
1 From the printer control panel, navigate to:
> Setup > OK > Device Setup > OK > Sleep >
OK
2 Press the up or down arrow button to select or use the keypad to enter the value of the Sleep timeout, and then
OK
press
.
Saving paper and energy
To significantly cut paper usage and reduce paper waste, activate duplex printing:
1 From the printer control panel, navigate to:
OK
OK
.
> Setup > OK > Print Mode Setup > OK > 2‑Sided Copy, Standalone >
2 Press the up or down arrow button to scroll to On, and then press
Using the printer control panel buttons and menus21
To optimize energy efficiency, reduce the Sleep timeout and Screen Brightness:
1 From the printer control panel, navigate to:
> Setup > OK > Device Setup > OK > Sleep >
OK
2 Press the up or down arrow button to select or use the keypad to enter the Sleep timeout value, and then press
OK
.
3 From the printer control panel, navigate to:
> Setup > OK > Device Setup > OK > Screen Brightness >
OK
4 Press the up or down arrow button to scroll to Dim, and then press
OK
.
Note: If you select 2‑Sided Copy, Standalone, then the printer prints on both sides of the paper (duplex) for
copy and fax jobs, and for printing in Windows and Macintosh, depending on your printer model.
Restoring factory default settings
Resetting to factory default settings will delete all the printer settings you have previously selected.
1 From the printer control panel, navigate to:
> Setup > OK > Restore Factory Defaults >
2 Press the up or down arrow button to scroll to Restore All Printer Settings, and then press
3 Press the left or right arrow button to scroll to Yes, and then press
The printer restarts automatically after resetting to factory default settings.
4 When prompted to set the initial settings of your printer, make your selections using the printer control panel
buttons.
Initial Setup Complete appears on the display.
OK
OK
OK
.
.
Using the printer software22
Using the printer software
Minimum system requirements
The printer software requires up to 500MB of free disk space.
Supported operating systems
• Microsoft Windows 7 (SP1)
• Microsoft Windows Server 2008 (R2 SP1)
• Microsoft Windows Server 2008 (SP1)
• Microsoft Windows Server 2003 (SP2)
• Microsoft Windows Vista (SP1)
• Microsoft Windows XP (SP3)
• Macintosh Intel OS X version 10.7.0 or later
• Macintosh Intel OS X version 10.6.0 or later
• Macintosh Intel OS X version 10.5.0 or later
• Macintosh Intel OS X version 10.4.4 or later
• Macintosh PowerPC OS X version 10.5.0 or later
• Macintosh PowerPC OS X version 10.4.0 or later
• Ubuntu Linux 11.04, 10.10, 10.04, and 9.04 LTS
• Red Hat Enterprise Linux WS 6, WS 5, and WS 4
• Red Flag Linux Desktop 6.0
• SUSE Linux Enterprise Server 11 and 10
*
*
• SUSE Linux Enterprise Desktop 11 and 10
• Linux openSUSE 11.4, 11.3, and 11.2
• Linpus Linux Desktop 9.6
• Fedora 14
*
*
• Debian GNU/Linux 6.0 and 5.0
• Mint 10 and 9
• PCLinux OS 2010
*
The printer driver for this operating system is available only at http://support.lexmark.com.
*
*
*
*
*
*
*
Using the Windows printer software
Software installed during printer installation
When you set up the printer using the installation software CD, all the necessary software was installed. You may have
chosen to install some additional programs. The following table provides an overview of various software programs
and what they can help you do.
Using the printer software23
If you did not install these additional programs during initial installation, then reinsert the installation software CD, run
the installation software, and then click Advanced Options > Install Additional Software.
Printer software
Use theTo
Lexmark
(referred to as Printer Home)
TM
Printer Home
• Launch applications or programs.
• Scan or e‑mail a photo or document.
• Edit scanned documents.
• Scan documents to PDF.
• Adjust settings for the printer.
• Order supplies.
• Maintain ink cartridges.
• Register the printer.
• Contact technical support.
• Access the User's Guide.
Lexmark Phone Book
(referred to as Phone Book)
Abbyy Sprint OCRScan a document and produce text that you can edit with a word‑processing
Lexmark Wireless Setup Utility
(referred to as Wireless Setup Utility)
Lexmark Tools for Office
(referred to as Tools for Office)
Printer Setup UtilityConfigure the fax and e‑mail settings of your printer.
Status MessengerLearn more about the printing problems encountered.
Status Monitor Center
Manage your fax contacts.
program.
• Set up the wireless printer on a wireless network.
• Change the wireless settings of the printer.
Note: This program is installed automatically with the printer software if the
printer has wireless capability.
Access your favorite settings in Microsoft Office 2007.
• Check the supplies status of your printer.
• Order supplies online.
Product UpdateReceive automatic notifications of updates to your printer software when new
updates are available.
Using the printer software24
Use theTo
Printing PreferencesWhen you click File > Print > Properties with a document open, a Printing
Preferences dialog appears. The dialog lets you select options for the print job,
such as the following:
• Select the number of copies to print.
• Print two‑sided copies.
• Select the paper type.
• Add a watermark.
• Enhance images.
• Save settings.
Note: Printing Preferences is installed automatically with the printer software.
Note: Your printer may not come with some of these programs or some of the functions of these programs,
depending on the features of the printer that you purchased.
Using the Macintosh printer software
Launching the Print dialog
Use the Print dialog to adjust the print settings and schedule print jobs.
With a document or photo open, choose File > Print.
Launching an application
1 From the Finder, navigate to:
Applications > select your printer folder
2 Double‑click the application that you want to use.
Use theTo
Printer Settings
ShortcutsSpeed up usual tasks with your printer.
Wireless Setup
Assistant
• Customize settings for fax jobs.
• Create and edit the Contacts list.
• Configure e‑mail connectivity settings.
• Configure the language, country, date, and time.
Set up the printer on a wireless network.
Note: This application is automatically installed with the printer software if the printer has
wireless capability.
UninstallerRemove the printer software from your computer.
Notes:
• Your printer may not come with these applications, depending on the features of the printer that you purchased
or the installation type (standard or custom) chosen when you installed the printer.
Using the printer software25
• To take advantage of the full features of your printer, select the custom install option during installation, and
then select all packages listed.
Accessing Web links
Web links are links to predefined Web pages that are saved in the printer folder.
1 From the Finder, navigate to:
Applications > select your printer folder > Web Links
2 Double‑click the Web link that you want to visit.
UseTo
Customer SupportContact customer support.
Lexmark Software UpdatesDownload and install the latest printer software.
Lexmark OnlineVisit the Lexmark Web site.
Order Supplies OnlineOrder ink or supplies.
Printer RegistrationRegister your printer.
Visit Lexmark SmartSolutions
Note: Your printer may not come with these Web links, depending on the features of the printer that you purchased.
• Visit the SmartSolutions Web site.
• Choose your custom solutions.
Finding and installing optional software
For Windows users
1 Click or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Navigate to:
Printer Home > select your printer > Support > Online support
4 From the Web site, select your printer and then download the driver.
5 Install additional or optional software.
For Macintosh users
1 From the Finder, navigate to:
Applications > select your printer folder > Web Links > Lexmark Software Updates
2 From the Web site, select your printer and then download the driver.
3 Install additional or optional software.
Using the printer software26
Updating the printer software
For Windows users
1 Click or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Select your printer, and then click Product Update.
4 Follow the instructions on the computer screen.
For Macintosh users
1 From the Finder, navigate to:
Applications > select your printer folder > Web Links > Lexmark Software Updates
2 From the Web site, select your printer and then download the driver.
Downloading PCL and PS drivers (Windows only)
Universal Print Drivers (PCL 5 emulation, PCL XL emulation, and PS emulation) can be downloaded from our Web site.
You need to search for your printer model to view compatible drivers.
Reinstalling the printer software
When you set up the printer using the installation software CD, all the necessary software was installed. If you
encountered problems while installing, or if your printer does not appear in the printers folder or as a printer option
when you send a print job, then try uninstalling and reinstalling the printer software.
Uninstalling the printer software
For Windows users
1
Click or Start.
2 Click All Programs or Programs, and then select the printer program folder from the list.
3 Click the uninstaller.
4 Follow the instructions on the computer screen.
5 Once the uninstall process is complete, restart your computer.
For Macintosh users
1
Close all open applications.
2 From the Finder, navigate to:
Applications > select your printer folder
Using the printer software27
3 Double‑click Uninstaller.
4 Follow the instructions on the computer screen.
Installing the printer software
Note: If you installed the printer software on this computer before but need to reinstall the software, then uninstall
the current software first.
For Windows users
1
Close all open software programs.
2 Insert the installation software CD.
If the installation dialog screen does not appear after a minute, then launch the CD manually:
a Click , or click Start and then click Run.
b In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
c Press Enter, or click OK.
3 Click Install, and then follow the instructions on the computer screen.
For Macintosh users
Note: To take advantage of the full features of your printer, select the custom install option, and then select all
packages listed.
1 Close all open applications.
2 Insert the installation software CD.
If the installation dialog does not appear after a minute, then click the CD icon on the desktop.
3 Double-click the software installer package, and then follow the instructions on the computer screen.
Using the Internet
1
Go to the Lexmark Web site at http://support.lexmark.com.
2 Navigate to:
SUPPORT & DOWNLOADS > select your printer > select your operating system
3 Download the driver, and then install the printer software.
Loading paper and original documents28
Loading paper and original documents
Loading paper
1 Flex the sheets back and forth to loosen them.
Do not fold or crease the paper. Straighten the edges of the stack on a level surface.
2 Open the paper feed guard.
3 Place the paper at the center of the paper support.
Note: Use the indicators on the paper support when loading smaller‑size paper.
Loading paper and original documents29
4 Adjust the paper guides so they rest against the edges of the paper.
Note: Do not force paper into the printer. The paper should be flat against the paper support, and the edges
should be flush against both paper guides.
5 Close the paper feed guard.
6 From the printer control panel, select or confirm your paper settings.
Paper and specialty media guidelines
Load up toMake sure that
100 sheets of plain paper
• The paper guides rest against the edges of the paper.
• You load letterhead paper with the printable side faceup
and the top of the letterhead going into the printer first.
Loading paper and original documents30
Load up toMake sure that
25 sheets of heavyweight matte paper
10 envelopes
• The printable side of the paper is faceup.
• The paper guides rest against the edges of the paper.
Note: Draft mode is available but is not recommended for
use with expensive paper such as heavyweight matte,
labels, photo cards, and glossy paper.
• The printable side of the envelope is faceup and the flap
is on the left.
• The paper guides rest against the edges of the envelopes.
• You load the envelope in the center of the paper support.
• You select the correct envelope size. Select the next
biggest size if the exact envelope size is not listed.
• You print the envelopes in landscape orientation.
Warning—Potential Damage: Do not use envelopes that
have metal clasps, string ties, or metal folding bars.
25 sheets of labels
25 greeting cards, index cards, postcards, or photo cards
Notes:
– Do not load envelopes with holes, perforations,
cutouts, or deep embossing.
– Do not use envelopes that have exposed flap adhesive.
• The printable side of the label is faceup.
• The paper guides rest against the edges of the paper.
Note: Draft mode is available but is not recommended for
use with expensive paper such as heavyweight matte,
labels, photo cards, and glossy paper.
• The printable side of the card is faceup.
• You load the photo paper in the center of the tray.
• The paper guides rest against the edges of the cards.
Notes:
– For best results, allow photos to dry at least 24 hours
before stacking, displaying, or storing.
– Draft mode is available but is not recommended for use
with expensive paper such as heavyweight matte,
labels, photo cards, and glossy paper.
Loading...
+ 153 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.