Extracted From Service Manual
4048–00x
Edition: September 2002
The following paragraph does not apply to any country where suc h provisions are
inconsiste nt with local law: LEXMARK INTERNATIONAL, IN C. PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRE SS OR
IMPLIED , INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do
not allow disclaimer of express or implied warranties in certain transactions; therefore, this
statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in later
editions. Improvements or changes in the products or the programs described may be
made at any time.
Comments may be addressed to Lexmark International, Inc., Department D22A/032-2,
740 West New Circle Road, Lexington, Kentucky 40550, U.S.A or e-mail at
ServiceInfoAndTraining@Lexmark.com. Lexmark may use or distribute any of the
information you supply in any way it believes appropriate without incurring any obligation
to you. You can purchase additional copies of publications related to this product by
calling 1-800-553-9727. In other countries, contact your point of purchase.
Lexmark, Lexmark with diamond design, MarkNet, MarkVision, Optra, and Prebate are
trademarks of Lexmark International, Inc., registered in the United States and/or other
countries.
Optra Forms and PictureGrade are trademarks of Lexmark International, Inc.
Other trademarks are the property of their respective owners.
© 2002 Lexmark International, Inc.
All rights reserved.
UNITED STA TES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use,
duplication or disclosure by the Government is subject to restrictions as set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
DF ARS 252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.
U.S.A. P/N 12G9119
4048–00x
7. Parts Catalog
How to Use This Parts Catalog
• SIMILAR ASSEMBLIES: If two assemblies contain a majority of
identical parts, they are shown on the same list. Common parts
are shown by one index number. Parts peculiar to one or the
other of the assemblies are listed separately and identified by
description.
• AR: (As Required) in the Units column indicates that the
quantity is not the same for all machines.
• NS: (Not Shown) in the Asm-Index column indicates that the
part is procurable but is not pictured in the illustration.
• PP: (Parts Packet) in the parts description column indicates the
part is contained in a parts packet.
Parts Catalog 7-1
4048–00x
Assembly 1: Covers
AsmIndex
1–1 56P0608 1 Cover Assembly, Rear
2 56P0607 1 Door Assembly, Rear Exit
3 56P0680 1 Flap, Paper Holder
4 56P0603 1 Cover Assembly, Duct
5 56P0604 1 Cover Assembly, Top
6 56P0605 1 Cover Assembly, Right
7 56P0601 1 Cover Assembly, Front, with Display
7 56P0602 1 Cover Assembly, Front with Display
8 56P0610 1 Cover Assembly, MPF Door
9 56P0679 1 Overlays, Language
10 56P0600 1 Cover Assembly, Left
Part
Numbers
Units Description
(without logo)
(with logo)
Parts Catalog 7-3
4048–00x
Assembly 2: Multipurpose Feeder (MPF)
5
1
4
2
3
7-4 Service Manual
4048–00x
Assembly 2: Multipurpose Feeder (MPF)
AsmIndex
2–1 56P0612 1 Housing Assembly, Upper (MPF)
2 56P0611 1 Housing Assembly, Lower (MPF)
3 56P0615 1 Cap, MPF Paper Feed Cover
4 56P0613 1 Assembly, Roller (MPF)
5 56P0614 1 Gear, MPF Paper Pick
Part
Numbers
Units Description
Parts Catalog 7-5