Lexmark and Lexmark with diamond design are
trademarks of Lexmark International, Inc., registered
in the United States and/or other countries .
Edition: March 26, 2009
The following paragraph does not apply to any country where such provisions are inc onsistent with local law:
LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICA TION “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANT ABILI TY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow di scl aimer of express or
implied warranties in certain transactions; there fore, this statement ma y not apply to you.
This publication could include tec hnical inaccuraci es or typographical er rors. Changes are period ically made to the
information herein; these changes wil l be incorporated in later editions. Improvements or changes in the products or the
programs described may be made at any time.
Comments may be addressed to Lexmark International, Inc., Department D22X/002-1, 740 West New Circle Road,
Lexington, Kentucky 40550, U.S.A or e-mail at S ervi ceInfoAndT raining@Lexmar k.com. Lexmark m ay use or distribute any
of the information you supply in any way it believes appropriate wi thout incurring any obligation to you.
References i n this publication to products, programs, or services do not i mp ly that the manufacturer intends to make these
available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or
imply that only t hat produ ct, pr ogra m, or serv ice may be used. Any funct ional ly equi valent pro duct, progr am, or servi ce that
does not infringe any existing intellectual property right may be used instea d. Eval uation and verifi cation of operation in
conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the
user’s respons ibility.
Lexmark, Lexmark wit h diamond design, and MarkV ision are trademarks of Lexmark Internat ional, Inc., registered in the
United States and/or other countries.
Optra Forms is a trademar k of Lexmark International, Inc.
PCL® is a registered trademark of the Hewlett-Packard Company.
All other trademarks are the property of their respective owners.
This software and any accompanying documentation provided under this agreement are commercial computer software
and documentation developed exclusively at private ex pense.
The following laser notice labels may be affixed to this printer.
Laser no tice
The printer is certified in the U.S. to conform to the requi rements of DHHS 21 CFR Subchapter J for Class I (1)
laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC
60825-1.
Class I laser products are not considered to be hazardous. The printer contains internall y a Clas s IIIb (3b) laser
that is nomin all y a 5 milliwatt gallium arseni de laser operating i n the wavelength region of 770-795 nanom eters.
The laser system and pri nter are designed so there i s never any human access to las er radiation above a Class
I level during normal operation, user maintenance, or prescribed service condition.
Laser
Der Drucker erfüllt gemäß amt li cher Bestätigung der USA die Anfor derungen der Bestimmung DHHS
(Department of Health and Human Services) 21 CFR Tei l J für Laserprodukte der Klasse I (1). In anderen
Ländern gilt der Drucker als Laserprodukt der Klasse I, der die Anforderungen der IEC (International
Electrotechnical Commission) 60825-1 gemäß amtlicher Bestätigung erfül lt .
7013-XXX
Laserprodukte der Klasse I gelten als unschädlich. Im Inneren des Druckers befind e t si ch ein Laser der Klasse
IIIb (3b), bei dem es sich um einen Galliumarsenlaser mit 5 Milliwatt handelt, der Wellen der Länge 770-795
Nanometer ausstr ahlt. Das Lasersystem und der Drucker sind so konzipiert, daß im Normalbetr ieb, bei der
Wart ung durch den Benutzer oder bei ord nungsgemäßer Wartung durch den Kundendienst Laserbestrahlung,
die Klasse I übersteigen würde, Menschen keinesfalls erreicht.
Avis relatif à l’utilisation de laser
Pour les Etats-Unis: cette impr imante est certifi ée conforme aux provisions DHHS 21 CFR alinéa J concernant
les produits laser de Classe I (1). Pour les aut res pays : cette imprimante répond aux normes IEC 60825-1
relatives aux produits laser de Classe I.
Les produits laser de Classe I sont considérés comme des produits non dangereux. Cette imprimante est
équipée d’un l aser de Classe IIIb (3b) (arséniur e de gallium d’une puissance nominal e de 5 milliwatts ) émettant
sur des longueurs d’onde comprises entre 770 et 795 nanomètres. L’imprimante et son système laser sont
conçus pour impossible, dans des conditions normales d’utilisation, d’entretien par l’utilisateur ou de révision,
l’exposition à des rayonnements laser supérieurs à des rayonnements de Classe I .
Avvertenze sui prodotti laser
Questa stampant e è certificata negli Stati Unit i per essere conforme ai requisit i del DHHS 21 CFR Sottocapitolo
J per i prodotti laser di classe 1 ed è certificat a negli altri Paesi come prodotto laser di classe 1 conforme ai
requisiti del la norma CEI 60825-1.
I prodotti laser di classe non sono consider at i pericol osi. La st ampant e contie ne al suo interno un laser d i classe
IIIb (3b) all’arseniuro di gall io della potenza di 5mW che opera sul la lunghezza d’ond a com presa tra 770 e 795
nanometri. Il sistema laser e la stampante sono stati proget tati in modo tale che le persone a contatto con la
stampante, durante il normale funzionamento, le operazioni di servizio o quelle di assistenza tecnica, non
ricevano radi azioni laser superi ori al livello della classe 1.
Notices and safety information ix
7013-XXX
Avisos sobre el láser
Se certifica que, en los EE.UU., esta impresora cumple los requisitos para los productos láser de Clase I (1)
establecidos en el su bcapítulo J de la norma CFR 21 del DHHS (Departamento de Sanid ad y Servicios) y, en
los demás países, reúne todas las condiciones expuestas en la norma IEC 60825-1 para productos láser de
Clase I (1).
Los productos láser de Clase I no se consideran peligrosos. La impresora contiene en su int eri or un láser de
Clase IIIb (3b) de arseniuro de gali o de funcionami ento nominal a 5 m ilivatios en una longitud de onda de 770 a
795 nanómetros. El sistema láser y la impresora están diseñados de forma que ninguna persona pueda verse
afectada por ni ngún ti po de radiación láser superior al nivel de la Clase I dur ante su uso normal, el
mantenimiento realizado por el usuario o cualquier otra situación de servici o técnico.
Declaração sobre Laser
A impressora e stá cer tific ada n os E.U.A . em conf ormidade com os r equisi tos da regu lamentaç ão DHHS 21 CFR
Subcapítulo J para a Class e I (1) de produt os laser. Em outros lo cais, está cert ificad a como um produto laser da
Classe I, em conformidade com os requisitos da norma IEC 60825-1.
Os produtos lase r da Class e I não são cons id erados per igosos . Inte rnamen te, a impress ora contém um produ to
laser da Classe IIIb (3b), designado laser de arseneto de potássio, de 5 mill iwatts ,operando numa faixa de
comprimento de onda entre 770 e 795 nanómetros. O sistema e a impressora laser foram concebido s de forma
a nunca existir qualquer possiblidade de acesso humano a radiaç ão laser superior a um nível de Classe I
durante a operação nor m al, a manutenção feita pel o utilizador ou condições de assistência prescritas.
Laserinformatie
De printer vol doet aan de ei sen d ie gest eld wor den aa n een las erprodu kt van kl as se I. Voor d e V er enigde St at en
zijn deze eisen vastgelegd in DHHS 21 CFR Subchapter J, voor andere landen in IEC 60825-1.
Laserprodukten van klasse I worden niet als ongevaarlijk aangemerkt. De printer is voorzien van een laser van
klasse IIIb (3b), dat wil zeggen een gallium arsenide-laser van 5 milliwatt met een golflengte van 770-795
nanometer. Het lasergedeelte en de pr inter zijn zo ontworpen dat bij normaal gebruik, bij onderhoud of r eparatie
conform de voorschriften, nooi t bl ootstelling mogelijk is aan laserstr aling boven een niveau zoals
voorgeschr even is voor klasse 1.
Lasermeddelelse
Printeren er godkendt som et Klasse I-laserprodukt, i overenstemmelse med kravene i IEC 60825-1.
Klasse I-laserprodukter betragtes ikke som farlige. Printeren indeholder internt en Klasse IIIB (3b)-laser, der
nominelt er en 5 milli watt galliumarsenid laser, som arbejder på bølgel æ ngdeområdet 770-795 nanometer.
Lasersystemet og printeren er udformet således, at mennesker aldrig udsættes for en laserstråling over Klasse
I-niveau ved nor m al dr ift, brugervedl igeholdelse ell er obligatoriske servi cebetingels er.
x Service Manual
Laserilmoitus
Tämä tulostin on sertif ioitu Yhdysvalloissa DHHS 21 CFR Subchapter J -standardin mukaiseksi luokan I (1) lasertuot teeksi ja muualla IEC 60825- 1 -st andardin mukaiseksi luokan I lasertuotteeksi.
Luokan I laser tuott eita ei pi det ä haita llisi na. T ul osti men si sällä on luokan I IIb ( 3b) las er , joka on ni melli stehol taan
5 mW:n galliumarsenidilaser ja toimii 770 - 795 nanometri n aallonpituuksilla. Laserjä rj estelmä ja tulosti n ovat
rakenteelt aan sellaisia, et tä käyttäjä ei joudu altt iiksi luokkaa 1 suur em m all e säteilylle nor m aalin käytön,
ylläpidon tai huollon aikana.
Huomautu s las er laitteesta
Tämä kirjoi tin on Yh dysval loiss a luokan I (1) las erlai ttei den DHHS 21 CFR Subc hapt er J -määr ity ksen mukai nen
ja muualla luokan I laserlaitteiden IEC 60825-1 -määrityksen mukainen.
Luokan I laserlaitteiden ei katsota olevan vaarallisia käyttäjälle. Kirjoittimessa on sisäinen luokan IIIb (3b) 5
milliwatin gal liumarsenid il aser, joka toimii aaltoalueella 770 - 795 nanometr iä. Laserjärje stelmä ja kirjoitin on
suunniteltu siten, että käytt äjä ei altistu luokan I määrityksiä voimakkaammalle säteilylle kirj oittimen normaalin
toiminnan, käyttäjän tekemien huoltotoimien tai muiden huoltotoimien yhteydessä.
VARO! Avattaessa ja suoj alukitus ohitet taessa olet altt ii na näkymättömälle lasersäteilyl le. Älä katso
säteeseen.
7013-XXX
VARNING! Osynlig laserstrålning när denna del är öppnad och spärren är urkoppl ad. Betrakta ej strålen.
Laser-notis
Denna skrivare är i USA certifierad att motsvara kraven i DHHS 21 CFR, underparagraf J för laserprodukter av
Klass I (1). I andra länder uppfyller skrivaren kraven för laserprodukter av Klass I enligt kraven i IEC 60825-1.
Laserprodukter i Klass I anses ej hälsovådliga. Skriva ren har en inbyggd laser av Klas s II Ib (3b) som består av
en laserenhet av gal lium-arsenid på 5 mil li watt som arbetar i våglängdsområdet 770-795 nanom eter.
Lasersystem et och skrivaren är utfo rmade så att det aldrig finns risk för att någon pe rson utsätts för
laserstrå lning över Klass I-nivå vid normal användning, underhåll som utför s av användaren eller annan
föreskriv en serviceåtgärd.
Laser-melding
Skriveren er godkjent i USA etter kravene i DHHS 21 CFR, underkap it tel J, for klasse I (1) laserproduk ter, og er
i andre land godkjent som et Klasse I-laser produkt i samsvar med krav ene i I EC 60825-1.
Klasse I-laserprodukter er ikke å betrakte som farlige. Skriveren inneholder inter nt en klasse IIIb (3b)-laser, som
består av en gallium-arsenlaserenhet som avgir stråli ng i bølgelengdeomr ådet 770-795 nanometer.
Lasersystem et og skrive ren er utformet slik at personer aldri utsett es for la serstrål i ng ut over klasse I-n ivå under
vanlig bruk, vedlikehold som utføres av brukeren, ell er fo reskrevne serviceoperasjoner.
Notices and safety information xi
7013-XXX
Avís sobre el Làser
Segons ha estat cert ificat als Estats Units, aquesta impressor a compleix els requi sits de DHHS 21 CFR, apartat
J, pels productes làser de classe I (1), i segons ha estat cer tificat en alt res llocs, és un producte làser de classe
I que compleix els requisits d’IEC 60825-1.
Els productes l àser de classe I no es consideren perillosos. Aquesta impressora con té un làser de classe IIIb
(3b) d’arseniür de gal.li, nominalment de 5 mil.liwats, i funciona a la regió de longi tud d’ ona de 770-795
nanòmetres. El sistema làser i la impressora han sigut concebuts de manera que mai hi hagi exposició a la
radiació làser per sobre d’un nivell de classe I durant una operaci ó normal, durant les tasques de manteniment
d’usuari ni durant els serveis que satisfacin les condicions prescrites.
xii Service Manual
7013-XXX
Notices and safety information xiii
7013-XXX
xiv Service Manual
Safety information
CAUTION
This product cont ains a lithi um battery. THERE IS A RISK OF EXPL OSION IF THE BATTERY
IS REPLACED BY AN INCORRECT TYPE. Discard used batteries according to the battery
manufacturer’s instructions and local regulations.
•The safety of this product is based on testing and approvals of the original design and speci fi c
components. The man ufacturer is not res ponsible for safety in the event of use of unauthorized
replacement parts.
•The maintenance inf ormation for this product has been prepared for use by a professional ser vice person
and is not intended to be used by others.
•There may be an increased risk of electric shock and personal injury during disassembly and servicing of
this product. Professional service personnel should understand this and take necessary precautions.
•CAUTION: When you see this symbol, there i s a danger from hazardous volta ge i n the area of the
product where you a re work ing. Unp lug th e product be fore y ou begin, or us e cau tion i f th e product
must receive power in order to perform the task.
7013-XXX
Consignes de sécurité
•La sécurité de ce pro duit repose sur des tests et des
agréations por tant sur sa conception d' origine et sur des composants particuliers. Le fabricant n'assume
aucune respon sabilité concernant la sécurité en cas d'ut ilisation de piè ces de rechange non agréées.
•Les consignes d'entretien et de réparation de ce produit s'adressent unique me nt à un personnel de
maintenance qualifié.
•Le démontage et l'entretien de ce produit pouvant présenter certains risques électriques, le personnel
d'entretien qualifié devra prendre toutes les précautions nécessaires.
•ATTENTION : Ce symbole indique la présence d' unetensi on dangereuse dans la partie du
produit sur laquelle vous travaillez. Débranchez le produit avant de commencer ou fai tes preuve
de vigilance si l' exécution de la tâche exige que le produit reste sous tension.
Norme di sicurezza
•La sicurezza del prodotto si basa sui test e sull'approvazione del progetto originale e dei componenti
specifici. Il produttore non è resp onsabile per la sicur ezza in caso di sostituzione non autorizzata delle
parti.
•Le informazion i riguardanti la manutenzione di questo prodotto sono indirizzate soltanto al pers onale di
assistenza autorizzato.
•Durante lo smontaggio e la manutenzione di questo prodotto,
il rischio di subire scosse elettriche e danni alla persona è più elevato. Il personale di assistenza
autorizzat o deve, quindi, adott are le precauzioni necessarie.
•ATTENZIONE: Questo simbolo indica la presenza di tensione pericolosa nell'area del prodotto.
Scollegare il pr odotto prima di iniziare o usare cautela se il prodotto deve essere alimentato per
eseguire l'intervento.
Safety information xv
7013-XXX
Sicherheitshinweise
•Die Sicherheit di eses Produkts basiert auf Tests und Zulassungen des ursprünglichen Modells und
bestimmter Baut eil e. Bei Ver wendung nicht genehmigter Ersatzteile wird vo m Hersteller keine
Verantwortung oder Haftung für die Sicherheit übernommen.
•Die Wartungsinformationen für dieses Produkt sind ausschließli ch für die Verw endung durch einen
Wart ungsfachmann bestimmt.
•Während des Auseinandernehmens und der W artung des Geräts besteht ein zusätzlic hes Risiko eines
elektrischen Schlags und körperlicher Verletzung. Das zust ändige Fachpersonal sollte entsprechende
Vor sichtsmaßnahmen tr effen.
•ACHTUNG: Dieses Symbol weist auf eine gefährliche elektrische Spannung hin, die i n diesem
Bereich des Produkts auf tret en kann. Zieh en Sie vor den Arbeit en am Gerät den Netzsteck er des
Geräts, bzw. arbeiten Sie mit großer Vorsicht, wenn das Produkt für die Ausführung der Arbeiten
an den Strom angeschlossen sein muß.
Pautas de Seguridad
•La seguridad de este producto se basa en pruebas y aprobaciones del diseño original y componentes
específico s. El fabri cante no es responsabl e de la seguridad en caso de uso de piezas de repuesto no
autorizadas.
•La información sobre el mantenimiento de este producto está dirigida exclusivamente al personal
cualificado de mantenimiento.
•Existe mayor riesgo de de scarga e léc trica y de dañ os pe rsonal es du rante e l desmont aj e y la r eparaci ón de
la máquina. El personal cualificado debe ser consciente de este peligro y tomar las precauciones
necesarias.
•PRECAUCIÓN: este símbolo indica que el voltaje de la parte del equipo con la que está
trabajando es pel igroso. Antes de empezar, desenchufe el equipo o tenga cuidado si, para
trabajar con él, debe conectarlo.
Inform a çõ es de Segurança
•A segurança deste produto baseia-se em testes e aprovações do modelo ori ginal e de componentes
específico s. O fabr icante não é responsá vel pela segunrança, no caso de uso de peças de substit uição
não autorizadas.
•As informações de segurança relativas a este produto destinam-se a profissionais destes serviços e não
devem ser utilizadas por outras pessoas.
•Risco de choques eléctricos e ferimentos graves durante a desmontagem e manutenção deste produto.
Os profissionais destes serviços devem estar avisados deste facto e tomar os cuidados necessários.
•CUIDADO: Quando vir este símbolo, existe a possível presença de um a potencial tensão
perigosa na zona do produto em que está a trabalhar. Antes de come çar, desligue o produto da
tomada eléctr ica ou seja cu ida doso caso o pr oduto t enha de estar liga do à c orrent e eléc tric a para
realizar a taref a necessária.
xvi Service Manual
Informació de Seguretat
•La seguretat d'aquest producte es basa en l' avaluació i aprovació del disseny original i els components
específics .
El fabricant no es fa responsable de les qüestions de
seguretat si s'u ti litzen peces de recanvi no autoritzades.
•La informació pel ma nteniment d’aquest producte està orient ada exclusivament a professionals i no està
destinada
a ningú que no ho sigui.
•El risc de xoc elèctric i de danys personals pot augmentar durant el procés de desmuntatge i de servei
d’aquest producte. El personal professional ha d’estar-ne assabentat i prendre
les mesures con venients.
•PRECAUCIÓ: aquest símbol indica que el voltatge de la part de l'equip amb la qual esteu
treballan t és perilló s. Abans de comen çar, desendolle u l'equi p o extremeu les preca ucions si , per
treballar am b l'equip, l'heu de connect ar.
7013-XXX
Safet y info r m a tio n xvii
7013-XXX
CAUTION
A caution identifies something that might cause a servicer harm.
CAUTION
This type of caution i ndicates there is a danger from hazardous voltage in t he area of the
product where you are working. Unplug the product befor e you begin, or use caution i f th e
product must recei ve power in order to perform the task.
CAUTION
This type of caution i ndicates a hot surface.
CAUTION
This type of caution i ndicates a tipping hazar d.
Preface
This manual contains maintenance procedures for service personnel. It is divided into the following chapters:
1. General infor m a ti o n contains a general description of the printer and the maintenance approach used to
repair it. Speci al tools and test equip me nt, as well as general environmental and safety instructions, are
discussed.
2. Diagnostic information contains an error indicator table, sym ptom tables, and service checks used to
isolate failing field replaceable units (FRUs).
3. Diagnostic aids con tai ns tests and checks used to locate or repeat symp toms of printer probl ems .
4. Repair infor ma t io n provides instructions for making printer adjustments and removing and i nstalling
FRUs.
5. Connector locations uses il lustrations to identify the connector locations and test poi nts on the printer.
6. Preventive maintenance contains the lubrication specif ications and recomme ndations to prevent
problems.
7. Parts catalog cont ains illustrations and part numbers for individual FRUs.
Appendix A contains service tips and inf ormation.
Appendix B contains representative print samples .
Conventions
Note: A note provides additional information.
Warni ng: A warning identifies something that might damage the product hardware or software.
There are several types of caution statements:
xviii Service Manual
1. General in formation
The Lexmark™ X364dw, X364dn, X363d n, and X264dn are monochrome laser pri nters designed for si ngle
users or small workgroups.
7013-XXX
Maintenance approach
The diagnostic information in this manual leads to the correct field replaceable unit (FRU) or part. Use the error
code charts, sympt om index, and service checks to determine the symptom and repair the failure. See
“Diagnostics information” on page 2-1 for more informati on. See “Repair information” on page 4-1 to help
identify parts. After completing the repair, perform tests as needed to verify the repair.
General information 1-1
7013-XXX
Shortcuts
3
DEF
6
MNO
9
WXYZ
#
2
ABC
5
JKL
8
TUV
0
1
@
!.
4
PQRS
7
*
Fax
Redial/Pause
Resolution
Options
Hook
Select
Start
Stop/Cancel
Menu
Back
Copy
Copies
Scale
Options
Content
Darkness
Duplex/2-Sided
Text
Text/Photo
Photo
CopyCopy
Scan/EmailScan/Email
Fax
Overview of the operator panel
The operator panel is divided into three sections:
•Selections and settings area
•Display area
•Keypad area
Selections and sett ings contains ten butt ons (Copy, Scan/Email, Fax, Content, Darkness, Dupl ex/2-sided,
Copies, Scal e, Options, and Address book) and three lights (Text, Text/Photo, and Photo) that light up to display
the chosen content option.
The display area contains seven buttons (Menu, Back, Left arrow, Select, Right arrow, Start, and Stop/Cancel),
an indicator light, and a 2-line liquid crystal display (LCD) that shows text.
The keypad area cont ai ns fi ve butto ns (Redi al/Paus e, Res olution, Opt ions, Ho ok, and Shor tcut s), a key pad, and
a USB port.
For more information on the operator panel, see “Overview of the operator panel and menus” on page 2-2.
1-2 Ser vice Manual
Specifications
Memory
7013-XXX
Item
Standard memory64MB128MB128MB128MB
Maximum memory64MB128MB128MB128MB
Optional memory
Envelope conditioningxxxx
Instant on fuser
Standard output sources
150-sheet sensing bin
T oner and photoconductor
7013-235
Lexmark X264dn
7013-432
Lexmark X363dn
duplex
7013-436
Lexmark X364dn
Recirculating
duplex
7013-43W
Lexmark X364dw
Recirculating
duplex
Toner cartridge1,500 standard
pages SWE¹
X360 Series standar d yieldx3,500 standard pages SWE¹
High toner cartri dgex9,000 standard pages¹
Photoconductor kitUp to 30,000 pages²
¹ Declared value in accordance with ISO/IEC 1975 2
² Up to 30,000 pages, based on an average of 3 pages per job and approximately 5% coverage per page. Yields may
vary based on customer usage.
3,000 standard pages SWE¹
1-6 Ser vice Manual
Types of print media
Note: Ensure trays are properly loaded. Never mix media types wit hin a tray.
SourceSizes TypesWeightInput capacity* (sheets)
7013-XXX
Input tray 1
(250-sheet tray)
2nd Drawer option
(250-sheet dr awer,
550-sheet drawer)
Manual feeder slotA4, A5, A6,JIS¹-B5,
A4, A5, A6,JIS¹-B5,
letter, legal, executive,
oficio (Me x ic o )² , fo lio ² ,
statement, uni versal
letter, legal, executive,
oficio (Me x ic o )² , fo lio ² ,
statement, uni versal
Plain paper,
transparency,
recycled, labels,
bond, letterhead,
preprinte d, colored
paper, light paper,
heavy paper,
rough/cotton,
custom type [x]
Plain paper,
recycled, labels,
bond, letterhead,
preprinte d, colored
paper, light paper,
heavy paper,
rough/cotton,
custom ty p e [x]]
Plain paper,
transparency,
recycled, labels,
bond, letterhead,
preprinte d, colored
paper, light paper,
heavy paper,
rough/cotton,
custom type [x]
Card stock***• 120-163 g/m²
60-9 0 g/m²
(16-24 lb)
60-9 0 g/m²
(16-24 lb)
60-1 63 g/m²
(16-43 lb)
(16-43 lb)
Index Bristol
• 75-163 g/m²
(46-100 lb)
Tag
• 150 paper
• 50 labels**
• 10 transparenci es
• 1 paper
• 1 labels**
• 1 paper
• 1 labe l**
• 1 transparency
1
7 ¾, 9, 10, DL, C5, B5,
other
Manual paperA4, A5, A6,JIS¹-B5,
letter, legal, executive,
oficio (Me x ic o )² , fo lio ² ,
statement, uni versal
Manual envelope7 ¾, 9, 10, DL, C5, B5,
other
Envelopes, rou gh
envelopes
Plain paper,
transparency,
recycled, labels,
bond, letterhead,
preprinte d, colored
paper, light paper,
heavy paper,
rough/cotton,
custom type [x]
Card stock***• 120-163 g/m²
Envelopes, rou gh
envelopes, cus tom
type [x]
75 g/m² (20 lb)1
60-1 63 g/m²
(16-43 lb)
(16-43 lb)
Index Bristol
• 75-163 g/m²
(46-100 lb)
Tag
75 g/m² (20 lb)1
• 1 paper
• 1 labe l**
• 1 transparency
1
General information 1-7
7013-XXX
SourceSizes TypesWeightInput capacity* (sheets)
DuplexA4, letter, legal, oficio
Automatic document
feeder (ADF)
Multipurpose feederA4, A5, A6,JIS¹-B5,
(Mexico), fo li o
A4, A5, JIS¹-B5, letter,
legal, executive, oficio
(Mexico), fo li o,
statement, uni versal,
custom scan typ e [x]
letter, legal, executive,
oficio (Mexico), folio,
statement, uni versal
7 ¾, 9, 10, DL, C5, B5,
other
Plain paper,
recycled, bond,
letterhead,
preprinte d, colored
paper, light paper,
heavy paper,
custom type [x]
Accepts any media type supported by the print engine
Plain paper,
transparency,
recycled, labels,
bond, letterhead,
preprinte d, colored
paper, light paper,
heavy paper,
rough/cotton,
custom type [x]
Card stock***• 120-163 g/m²
Envelopes
Rough envelopes
60-9 0 g/m²
(16-24 lb)
60-1 63 g/m²
(16-43 lb)
(16-43 lb)
Index Bristol
• 75-163 g/m²
(46-100 lb)
Tag
75 g/m² (20 lb)7
• 250 paper
• 550 paper
• 50 paper
• 15 labels**
• 10 transparenci es
20
FlatbedBusiness card, 3 X 5,
4 X 6, A4, A5, JIS¹-B5,
letter, executive,
statement, uni versal,
custom scan typ e [x]
* Capacity for 20 lb print media, unless otherwise noted.
** Use for occasional printing only.
*** Grain short is recommended. Use rear exit for best results.
¹Japanese Indust ry Standard
Accepts any media type supported by the print engine
Fax memory4 MB Flash (More than 320 pages based on ITU chart #1)
Speed dialYes. 999 entries
TransmissionApproximatel y 3 seconds per page
Color faxYes
Fax from PCYes. Supported using PostScr ipt driver for both local and network attach modes.
Caller IDYes
Junk FAX blockingYes - based on caller ID and remote st ation ID
Tone/PulseTone: Default, Pulse: Yes
Fax forwardYes
Broadc astingYes. 12 des tin ations
External phone in terfaceYes
Manual modeYes
Fax short c utsYes.
Fax contentText, text/photo, photo
Fax perseverationYes
HalftoningYes
User selectabl e parameters are stored in NVRAM.
General information 1-11
7013-XXX
Tools
The removal and adjust m ent procedures require the following tool s and equipment:
•Spring hook
•Needle nose pliers
•Volt-ohmmeter
•#1 and #2 Phillips screwdr iv e r
•Slotted screwdriver
Acronyms
acAlternating Current
ACMAutocompens ator Mechanism (or paper feed)
ADFAutomatic document feeder
AFEAnalog front end
AIOAll-In-One
APSAutomatic Paper Size
ASICApplication Specific Integrated Circui t
BLDCBrushless DC Motor
BORBlack Only Retract
BUDBelt up down
CCyan
CCDCharge-Couple Device
CCFLCold Cathode Fluorescent Lamp
CCWCounter clockwise
CDBCommand Descriptor Blocks
CMYKCyan yellow magenta black
CPUCentral processing unit
CRCCyclic redundancy check
CRUCustomer Replaceable Unit
CSU Customer Setup
CWCl ockwise
DBCSDouble byte character set
dcDirect Current
DIMMDual Inline Memory Module
DLEDownloadable emulator
DRAM Dynamic random access memory
DVMDig ita l mu ltimeter
ECCError correcting code
ECMError correction mode
EDOEnhanced Data Out
EEPROMElectrical Erasable Programmable Read-Only Memory
ENAExternal Network Adapter
EOLEnd of line
EP Electrophotographic process
EPROMErasable programmable read-only memory
ESDElectrostatic Discharge
FBFlatbed
FDFacedown
FRU Field replaceable unit
FUFace up
1-12 Service Manual
Loading...
+ 214 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.