First Edition (October, 1998)
The following paragraph does not apply to any country where such provisions are
inconsistent with local law: LEXMARK INTERNATIONAL, INC.PROVIDES THIS
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED,INCLUDING, BUT NOTLIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY ORFITNESSFOR A PARTICULAR PURPOSE. Some states do not
allow disclaimer of express or implied warranties in certain transactions, therefore, this
statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporatedin later
editions. Improvements or changes in the products or the programs described may be
made at any time.
Comments may be addressed to Lexmark International, Inc., Department D22/035-3,
740 New Circle Road N.W., Lexington, Kentucky 40550, U.S.A. Lexmark may use or
distribute any of the information you supply in any way it believes appropriate without
incurring any obligation to you. You can purchase additional copies of publications related
to this product by calling 1-800-553-9727. In other countries, contact your point of
purchase.
Lexmark,FontVision, MarkVision,and Optra are trademarks of Lexmark International,
Inc., registered in the United States and/or other countries.
Other trademarks are the property of their respective owners.
This software and documentation are provided with RESTRICTED RIGHTS. Use,
duplication or disclosure by the Government is subject to restrictions as set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
DFARS252.227-7013 and in applicable FAR provisions: Lexmark International, Inc.,
Lexington, KY 40550.
5050-001
7. Parts Catalog
How to Use This Parts Catalog
• SIMILAR ASSEMBLIES: If two assemblies contain a majority of
identical parts, they are shown on the same list. Common parts
are shown by one index number. Parts peculiar to one or the
other of the assemblies are listed separately and identified by
description.
• AR: (As Required) in the Units column indicates that the quan-
tity is not the same for all machines.
• NP: (Non-Procurable) in the Units column indicates that the part
is non-procurable and that the individual parts or the next higher
assembly should be ordered.
• NR: (Not Recommended) in the Units column indicates that the
part is procurable but not recommended for field replacement,
and that the next higher assembly should be ordered.
• R: (Restricted) in the Units column indicates that the part has a
restricted availability.
• NS: (Not Shown) in the Asm-Index column indicates that the
part is procurable but is not pictured in the illustration.
• PP: (Parts Packet) in the Description column indicates that the
part is contained in a parts packet.
• A part reference within a circle indicates an assembly or a bill-
of-material. An assembly is complete. A bill-of-material contains
unassembled parts.
Parts Catalog 7-1
5050-001
Assembly 1: Covers
Parts Catalog7-2
5050-001
Assembly 1: Covers
1-111G01011Top Cover (115 V)
-111G06501Top Cover (230 V)
-111G07161Top Cover (100 V) - Japan
-211G01021Paper Stopper
-311G01041Side Cover Asm, L
-411G01031FC Cover
-511G01294Rubber Plate
-611G01051Sub Cover, L F
-711G05461Sub Cover, L R
-811G05471Rear Cover L, (230volt)
-811G01061Rear Cover L, (115volt)
-811G07171Rear Cover L, (100volt) - Japan
-911G01071Second CN Cover
-1011G01081Side Cover, R
-1111G01091Sub Cover, R
-1211G05521Sub Cover, R
-1311G01101Front Sub Cover
-1411G01111Front Cover Asm
-1511G01121Latch
-1711G01281Mpf Asm
-1811G01131Mpf Side Location L
-1911G01141Mpf Side Location R
-2011G01151Mpf Tray (L)
-2111G06231Label, Paper Size, Mpf
-2211G01161Sub Tray
-2311G01172Mpf Rack
-2411G01181Mpf Pinion
-2511G01191Mpf Lock Lever
-2611G01201Tray Lock Spring
-2711G01221Mpf Spring
-2811G01231Mpf Cover
Parts Catalog 7-3
5050-001
Assembly 1 (cont.): Covers
Parts Catalog7-4
5050-001
Assembly 1 (cont.): Covers
1-2911G01212Mpf Holder
-3011G05241Bracket Rh Mpf Tray
-3111G05251Bracket Lh Mpf Tray
-3411G06311Rear Paper Exit Tray Asm
-3611G06512Screw, Mtg, Rear Paper Exit Tray
-3899A00011Operator Panel Asm
-3999A06301Bezel, Operator Panel
-3999A05411Bezel, Operator Panel - Japan
-NS11G05671Rating Plate, Low, (115 Volts)
-NS11G05681Rating Plate, High, (230 Volts)
-NS11G07181Rating Label, (100 Volts) - Japan
-NS11G06232Cushion, Exit Tray
-NS11G05691Screw Parts Packet #1
-NS11G06221Label, Instruction Mpt
-NS11G07321MPF Wire Extension
Parts Catalog 7-5
5050-001
Assembly 2: Paper Exit
Parts Catalog7-6
5050-001
Assembly 2: Paper Exit
2-111G01491Paper Exit Cover H
-211G01511Paper Exit Unit
-311G01311Paper Exit Cover
-411G01501Discharge Brush
-511G01346Roller Fitting Plate, Upper
-611G01358Paper Exit Roller
-711G01321Feed Guide
-811G01331Paper Delivery Flap
-911G01371Paper Exit Shaft, Upper
-1011G01402Bushing
-1111G01381Bushing C
-1211G01391Lock Spring
-1311G01411Paper Exit Frame
-1411G01431Ground Plate, Paper Exit
-1511G01442Pulley
-1611G01451Belt
-1711G01476Lower Roller Fitting Plate
-1911G05611Clutch Lever, Paper Delivery Flap
-2011G05071Clutch Lever, Spring
-2111G05081Paper Delivery Flap Plate Shaft
-2211G01461One Way Clutch Gear, 20
-2311G05111Screw, stopper
-2411G01361Harness Cover
-2511G05151
-2611G05181
-2711G01421Switch Spring
-2811G05631Photo Interrupter, Remove Paper
-2911G05211
-3011G05231
-3111G05271
-3211G05281
-NS11G05661
Paper Exit Feeder Base 1
Paper Exit Feeder Base 2
Paper Exit Feeder Rod
Paper Exit Feeder Spring
Paper Exit Feeder Lever
Sensor Cable, Remove Paper
Screw Parts Packet #2