Lexmark 10N0217 User Manual
Refill Instructions ÂLexmark 10N0217 (No.17)
fig.1
fig.2
Order your
Refill PACKs at:
www. .com
Lexmark
. X225
Color Jetprinter Z13 . Z23 . Z25 . Z33 . Z34 . Z35 . Z515 .
Z601 . Z605 . Z615
Items Required
Original Lexmark 17 Cartridge, Syringe & Filling Tube
Black Ink 10ml
All in One X72 . X74 . X75 . X1130 . X1150 . X1180
Instructions
Assemble syringe and steel filling tube and fill with
1.
appropriate colour ink. (g.2)
2. Remove the top from the black ink bottle and using
the syringe remove 10ml of black ink (g.3)
The filler hole is located on top of the cartridge.
3.
(g.4)
4. Insert the steel filling tube into the appropriate filling
holes. (g.5). Push down into centre of the sponge.
IMPORTANT: Cartridge contains a sponge and a
slight resistant may be felt.
SLOWLY
5. Inject ink. When ink overflows from filling
hole or starts to leak from print heads cartridge is full.
Stop injecting immediately.
Blot printer heads with tissue before continuing to fill
next colour.
IMPORTANT: Clean syringe with water and dry
before refilling next colour.
6. After refilling replace label back over filling hole.
7. Leave the cartridge to stand overnight on non-
absorbent surface this will ensure no
leakage and give the ink time to fully saturate the
sponge.
IMPORTANT: DO NOT LEAVE ON TISSUE.
8. Install cartridge and run a priming cycle.
refill
Black
Refilling
Hole
4
fig.3
fig.4
fig.5
PLEASE NOTE: The ink indicator level may need to
be turned off. Check your HP instructions manual for
details.
Loading...