
PowerRAMP®
Cable Protection System
Logo Guidelines
Lex offers custom logo marking for PowerRAMP® Cable Protectors. These markings are created using an insert in the mold itself and
are permanent. When used, custom logos will appear in place of the PowerRAMP® logo on the lid of the product, opposite the hazard
symbols. This document covers the size and locations of the logo insert, as well as the required artwork formats to create the insert.
Location and size: The logo insert is placed as shown.
7.50
2.25
Dimensions in Inches
®
Artwork Formats: Lex can work with most vector formats including AutoCAD
(dwg/dxf), Encapsulated Postscript (.eps), Postscript
(.ps), Scalable Vector Graphics (.svg) or CorelDraw® (.cdr/cmx). Please make sure to hatch areas if using dwg or dxf files.
Note: JPG, TIFF or other raster graphics files are not supported. Lex Products cannot accept any artwork that is in these formats, including
if the format is layered within a vector format image (e.g. a JPG within a DXF file). Lex Products accepts no responsibility for creating,
modifying, or editing logos or logo formats. We will work with our customers to recommend graphic artists should one be required.
Artwork Colors: Please format all artwork in black and white. Text or graphics in black shall be raised, also known as positive. This is
relative to any whitespace, which is depressed or known as negative.
Gradients: The process does not permit gradients. See example below.
Company Logo
Good Not Usable
Company Logo
Text Size: Due to the nature of the manufacturing process, finely tuned details such as letters and curves do not typically appear as
detailed on the actual product as they do in a graphic format. Therefore, it is necessary to have a minimum text height and width, as
well as a minimum spacing between a positive/raised/black and negative/depressed/white logo. These specifications are:
Minimum text height: 0.25 inch (1/4)
Minimum text width: 0.0625 inch (1/16)
Minimum distance between positive/negative spaces: 0.031 inch (1/32)
Lead Times: Two weeks after receipt of approved materials.
Lex Products Corporation
15 Progress Drive
Shelton CT 06484
203.363.3738
203.363.3742 Fax
Lex West
11847 Sheldon Street
Sun Valley, CA 91352
818.768.4474
818.768.4040 Fax
www.lexproducts.com
info@lexproducts.com
800.643.4460
© Copyright Lex Products 2013
Produced in the United States of America
All Rights Reserved.
Lex Products logo and lexproducts.com are trademarks
or registered trademarks of Lex Products in the United
States, other countries, or both.