Page 1
// MTP 350 CM/CMs
QUICKSTART GUIDE
// Overview
// Handheld condenser microphone
// Cardioid polar pattern for effective isolation of the main sound source
// Frequency response shaped specifi cally for vocal applications
// Integrated acoustic pop and windshield - washable
// Solid full-metal, die-cast body
// Hardened steel mesh grille
// Gold plated & corrosion-resistant 3-pin XLR output connector
// On/Off switch (MTP 350 CMs only)
TRANSPARENCY
IN MOTION
PROFESSIONAL WIRED HANDHELD CONDENSER
MICROPHONE FOR HIGHLY DETAILED SOUND
Top applications // Vocals, spoken word and live interviews
// Getting started
1 Connect your microphone to your mixing console, audio interface or microphone preamplifi er with a 3-pin XLR cable.
2 Supply the MTP 350 CM with 48V phantom power.
3 Check the On/Off switch (MTP 350 CMs only).
4 Set the input gain on your mixing console, preamp, etc. accordingly.
5 To ensure best sound quality, do not cover any part of the grille.
6 Rock!
// Please Note
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme
temperatures.
// Do not use force on the switch (MTP 350 CMs only) or cable of the microphone.
// When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Do not attempt to modify or fi x the microphone, as it would void your product warranty.
// The casing of the microphone can be cleaned easily using a wet cloth,
never use alcohol or another solvent for cleaning.
// The integrated acoustic pop and windshield can be washed
with soap water, if necessary.
READ THE
FULL MANUAL!
LEARN EVERYTHING ABOUT YOUR MTP 350 CM
www.lewitt-audio.com/resources/manuals/MTP-350-CM.pdf
®
LEWITT
Burggasse 79
1070 Vienna
Austria
www.lewitt-audio.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Loading...