Page 1
0
0
16.6
16.6
SIDE VIEW
TOP VIEW
Field of View (in feet)
14 42 71 100
10
0
Occupancy Sensor
Infrared Aisle (Long Range) Sensor
The OSWLR-I Sensor combines PIR
technology with a microprocessor
based digital architecture. By eliminating
false triggering, the sensor provides
a trouble-free “install and forget”
solution for lighting control.
THE OSWLR-I OCCUPANCY SENSOR
• PASSIVE INFRARED TECHNOLOGY (PIR)
• USE IN AISLES, LONG CORRIDORS AND HALLWAYS
• SIMPLE, FAST INSTALLATION
• SELF-ADJUSTING, SELF-CALIBRATING
• PHOTOCELL CONTROL
• MULTIPLE SENSOR AND POWER PACK CONNECTIONS
• 24VDC, CLASS 2 LOW VOLTAGE WIRING
• “TWIST-AND-LOCK BRACKET” INCLUDED
OSWLR-IOW
OSWLR-IOW
GENERAL OPERATION
Specifically designed for long, relatively narrow spaces
such as hallways and corridors, the OSWLR-I Occupancy
Sensor provides long range and high sensitivity.
The OSWLR-I Occupancy Sensor is a “long range”
lens. This lens provides coverage up to 100 ft. when
mounted 10 ft. above the floor
lower if needed.
The mounting base, provided with the sensor, allows
quick and easy mounting in corners, on walls or on ceilings. The most common applications are factory storage
areas, warehouse aisles and corridors.
. Can be mounted
FEATURES
Fast, Simple Installation:
wire connection (low voltage) and twist-and-lock detector
attachment.
Self-Adjusting:
analyzes, evaluates and adjusts the infrared sensitivity
Performance is kept at a maximum and user complaints
are eliminated.
Flexible Base Mounting:
mount permits fast alignment. Supplied cover hides mounting hardware and wires. Can be used with raceways for
hard surface installing. Wall or ceiling mount.
Range & Coverage:
or forklift. Max. 14 feet wide.
Internal microprocessor continually
Easy base mount, three
Supplied twist-and-lock base
Up to 1
00 ft. for g
ross body motion
.
Self Adjusting Timer: Timer is factory set at 10 minutes. User can easily
select 30s - 30 min using internal controls. Sensor may increase timer automatically through self-adapting features to meet room or occupancy patterns.
Ambient Light Recognition:
on when the room is adequately lit by natural light. Both “occupied” and
low-light-level and occupied” lights-on control wires are supplied.
Non-Volatile Memory:
memory are not lost during power outages.
A photocell prevents lights from turning
Learned and adjusted settings saved in protected
JOB NAME:
JOB NUMBER:
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
isit our W
V
SPECIFICA
ebsite at: www.leviton.com
TION SUBMITT
AL
CA
ALOG NUMBERS:
T
1
Page 2
M
ounting
B
ase
L
ong
R
ange
Lens
Base Cover
4.67 inch
4.23 inch
6.43 inch
Sensor
2.80 Inch
Hot (Black)
Neutral (White)
Load
Blue
(Control)
Black
Black
Red (24VDC)
Blue
Blue
Red
Blue*
(occupancy)
Blue*
(occupancy)
Gray*
(photocell +
occupancy)
Gray*
(photocell +
occupancy)
White
Black
White
Black
Red
Black
Line
120/277/347VAC
60Hz
Sensor
OSPxx Series Power Pack
NC-Brown
NO-Brown/White
C
ommon-Green
To HVAC
System
85°
60°
Product
Specifications
OSWLR-IOW
.........................
PRODUCT SPECIFICATIONS
Models
Part Number Lens Type Coverage Additional Features
OSWLR-I Long Range 100’, 14’ Wide @ 10 ft. Height Photocell
CONTROLS
Infrared Sensitivity: 0 to 100%: red knob (factory setting: 75%)
Photocell: Blue knob 20 to 3,000 Lux. Factory set at 3,000 Lux -
(disable photocell).
DIP switch settings
Switch Switch Functions Switch Settings
Bank A OFF ON
A1 N/A
A2 N/A
A3 Manual Mode Auto Adapting Enabled Auto Adapting Disabled
A4 Walk-Thru Disable Walk-Thru Enabled Walk-Thru Disabled
Bank B
B1 Override to On Auto Mode Lights forced On
B2 Override to Off Auto Mode Lights forced Off
B3 Test Mode OFF’ON’OFF Enter/Exit Test Mode
B4 LED Disable LEDS Enabled LEDS Disabled
MOUNTING BRACKET
ADJUSTMENT RANGE
INDICATORS
Red LED Lamp: Infrared motion.
SPECIFICATIONS
Adaptive Functions: Auto reset from test mode, self-adjusting time delay.
Learned occupancy patterns.
Construction: Housing: high-impact, injection molded plastic. Color coded wire
4 cm).
leads are 6” long (1
Size & Weight: 6”H x 2”W x 1.5”D, 6 ounces (Excluding mounting hardware).
Infrared Sensing: High sensitivity 9.8 micron detector dual element.
Lens: multi element, long range.
Mounting Bracket: Wall or ceiling mounted, twist-and-lock swivel base.
Color: W
hite.
Power Requirements: 24 VDC, 20 mA from the Cat. OSPxx power pack or
OPB15 Power Base Adapter.
Output: 24 VDC active high logic control signal with short circuit protection.
Operating Environment: 3
non-condensing. For indoor use only.
Warranty: 5 years.
*When the photocell function is not being used, connect the Blue Occupancy Sensor lead to the
Blue Power Pack lead. When using the Photocell function, connect the Gray Occupancy Sensor lead
to the Blue Power pack lead–Do not use the Blue Occupancy Sensor lead for the photocell function.
JOB NAME:
JOB NUMBER:
Leviton Mfg. Co., Inc.
59-25 Little Neck Pkwy • Little Neck, NY 11362-2591 • Tech Line: 1-800-824-3005 • Fax: 1-800-832-9538
2
isit our W
V
6.2
F to 104˚F, 0% to 95% relative humidity,
˚
2
SPECIFICA
TION SUBMITTAL
ebsite at: www
.leviton.com
ALOG NUMBERS:
T
CA
PHYSICAL WIRING
G-7733/E7 sw
Loading...