Leviton O2C, O2C10-MDW, O2C20-MDW, O2C05-MDW Product Data

PRODUCT DATA

O2C Dual Relay Multi-Technology
Occupancy Sensors

Light Pipe

DESCRIPTION

The Leviton O2C Dual Relay Occupancy sensors

combines line voltage occupancy sensors
and photocells into a self-contained unit. The
integrated design alleviates the need for separate
power pack and occupancy sensor wiring making
it a low-cost, efficient energy solution for new
construction and retrofits. For true Daylight
Harvesting applications, an integrated photocell
provides consistent Daylight Design Levels by
actively switching the connected load(s) ON
and OFF in response to available natural light
to maximize energy savings. Vacancy timers
continually analyze and adjust to changing
conditions using the latest microprocessor-based
technology to optimize performance. Auto ON/
Auto OFF automatically turns lights ON and
keeps them ON when occupancy is detected and
automatically turns lights OFF when the space
is vacant or unoccupied. Wire terminals allow for
simple connection to a line-voltage circuit and are
ideal for existing buildings with limited access to
wiring and new construction.

APPLICATIONS

• Daylight Harvesting

• CA Title 20/24 Compliant Occupancy Sensor

• Auto-ON/Auto-OFF

• Manual-ON/Auto-OFF

• Dual Relay Modes Include:

- Fan Control

- Auto ON/Manual ON

- Stairwell Control

- Step Dimming - Alternating Daylighting Levels

- Step Dimming - Load 1 Primary

Leviton Mfg. Co., Inc. Lighting & Energy Solutions

20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: [phone] www.leviton.com/les

© 2013 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

FEATURES

• Sensors combine both PIR and U/S technol-
ogy for unrivaled performance and reliability

• Sensors use PIR technology to initially turn
lights ON, and use U/S technology to keep

the lights ON

• Exclusive false-detection software assures

lights are ON only when needed

• Auto temperature – adjusts tech sensitivity
for optimal detection/operation

• Auto-Adapting: Time delay and sensitivity
are continually adjusted to occupancy
pattern of use

• Vacancy Sensing Time Outs

- Delayed OFF Timer

- Exclusive Walk-through Feature

• False Detection Timer: (M/T) PIR scans for

movement and shuts lights off after 31
minutes without movement, preventing false
triggers from HVAC systems

- Time delay and saved settings are protected
during power outages and will return to the
last known state

• Output short circuit protection

• Industry-exclusive self-configuring local

manual switch input: Momentary or
maintained switches are supported

• Presentation Mode allows user to turn lights

OFF and keep them OFF while the room is
occupied

• Adjustable Time Delay: 30s, 5min, 10min,

20min, 30min

• Test Mode for simplified commissioning

• Manual Switch and Emergency Override are

Class 1 and Class 2 circuits. Class 2 circuits
provided for flexibility

• Industry-exclusive “fail-safe” circuitry: In the

event of product failure, Return-to-Closed
feature causes the relay to default ON which
eliminates life safety concerns

O2C Dual Relay Multi-Technology Occupancy Sensors

PRODUCT DATA

Window

Peak Sensitivity

68°

O2C04

Typical Dayligt Zone, about 10’

Light Fixture

9’

4’

FEATURES

• Industry-exclusive H.I.S. (High Inrush Stability)
technology designed to handle today’s high inrush
electronic ballast loads and offer unmatched durability
and service

• Robust and reliable mechanically held latching
relay provides dependability and robust performance
for all load types and provides energy savings over
electronically held relays

• Field of View: Units from 500 to 2000 square feet
available

• Lenses are easily replaceable and color-coded red

(mid-range), black (extended range) and blue (high
denisty) for contractors and end-users to easily iden­tify lenses from the ground

• Visual LED indicators for all states:

- Red - Blinks when infrared is detecting motion and
during photocell manual calibration; solid during
device malfunction

- Green - Blinks when U/S is detected; solid during
auto calibration

- Yellow - Blinks during test mode; solid with
emergency/BMS input

- Blue - Blinks when knob settings are changed and
during photocell override

RATINGS AND TESTING

• Zero-crossing circuitry for extended life of the relay

• Tested to exceed 1 million switching cycles under

standard loads

• Multiple compliance and regulatory UL testing -
consult factory for details

• Passed rigorous NEMA 410 testing for electronic ballast

rating

• BMS Input/Emergency Override: UL 924 listed for
Emergency and Egress lighting control

Photocell Features

• Daylight Harvesting Applications:

• Auto-Calibration (Automatic Daylight

Calibration): Photocell intelligently measures
light levels to determine optimal daylight
design levels for closed loop applications

- Closed loop: Photocell detects total
photometric light from daylight or electric
sources in the space

- Open loop: Photocell detects measurement
of natural light only (sunlight from window or
skylight)

• Adjustable daylight design levels: Normal (OFF),

Manual (ON/OFF) and Auto Calibration

• Integrated photocell tested to less than 1 Fc

accuracy

INSTALLATION

• Easy installation into junction boxes with Leviton-
exclusive screw guides, coasters and terminal
blocks

• Front cover snaps on and off for ease of
installation

PHOTOCELL PLACEMENT*

Open Loop Application - Angled Light Pipe

O2C04

45°

Peak
Sensitivity

4’

Light Fixture

9’

PHOTOCELL OPERATION

Open Loop - Angled Light Pipe

Closed Loop - Flat Light Pipe

O2C Dual Relay Multi Technology Occupancy Sensors

7
6
5
4
3
2

Lights ON

1

Night time

0

7
6
5
4
3
2

Lights ON

1

DDL

0

OFF trigger point
Lights turn OFF

Dawn

Note: Long side of angled light pipe must
face toward natural light source (window)

OPEN LOOP

DDL

Dawn

Noon

2.5x DDL
Zone OFF

CLOSED LOOP

Noon

ON trigger point
Lights turn ON

1.25x DDL
Zone ON

Closed Loop Application - Flat Light Pipe

Dusk

Dusk

*May require more than one occupancy sensor for total room coverage

PRODUCT DATA

53

TOP VIEW

FIELD OF VIEWS

TOP VIEW

20

11.5

8.5

0

8.5

11.5

20

SIDE VIEW

8

0

035.6 911151720

O2C05-MDW

DIMENSIONS

1.16”

(29.60mm)

23

Major Motion, IR

Minor Motion, Ultrasonic

Major Motion, Ultrasonic

1.13”

(29.91mm)

15

10

5

0

5

10

15

20

TOP VIEW

SIDE VIEW

0510 15 20 2530 25 20 15 10

0

Multi-Range Lens (Included with all
PIR and Multi-Tech Models)

4.80”

(121.92mm)

20

8.5

0

8.5

20

8

0

SIDE VIEW

0 335.65.699 1111 1515

Major Motion, IR

Minor Motion, Ultrasonic

Major Motion, Ultrasonic

2020

1717

2323

20

16

11.5

0

11.5

8.5

20

8

0

O2C10-MDW

TOP VIEW

SIDE VIEW

0 335.55.599 1111 1515

O2C20-MDW

Major Motion, IR

Minor Motion, Ultrasonic

Major Motion, Ultrasonic

2020

22.522.5

3232

2.39”

(60.71mm)

0.94”

(24.06mm)

INSTALLATION

4”x4” Cosmetic Adapter

Screw Guides

Angled light pipe

ODC Series Multi-Technology Occupancy Sensors

Sensors conveniently mount to a standard

4” x 4” square or octagon electrical box per
NEC standards.

Sidebar Title Goes Here

Flat light pipe

O2C Dual Relay Multi Technology Occupancy Sensors

Leviton Mfg. Co., Inc. Lighting & Energy Solutions

20497 SW Teton Avenue, Tualatin, OR 97062 1-800-736-6682 Tech Line: 1-800-959-6004 Fax: [phone] www.leviton.com/les

© 2013 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

PRODUCT DATA

SPECIFICATIONS

ELECTRICAL

Input Voltage 120V, 50/60Hz 230V, 50Hz 277V, 50/60Hz

8A, Electronic

Ballast, 800W,

Load Rating

Tungsten,
800VA Ballast,
1/4 HP Motor

Current Consumption 60-30ma

ENVIRONMENTAL

Operating Temperature 32° to 104° F (0° to 40° C)

Storage Temperature -15° to 160° F (-26° to 71° C)

Relative Humidity 0% to 90% non-condensing

OTHER

Listings CA Title 20/24 Compliant, UL 773A (Occupancy Standard),

UL 924 (Emergency Equipment), cUL Listed, CE Compliant,

NOM Certified, RoHS Compliant, NY LLC48 Compliant

Warranty 5-Year Limited Warranty

6A/6AX, Electronic

Ballast, Magnetic
Ballast, Tungsten,
1/3 HP Motor

5A, Electronic

Ballast,
1200VA Ballast,
1/3 HP Motor

ORDERING INFORMATION

CAT. NO. DESCRIPTION

Multi-Technology Ceiling Mount Line Voltage Dual Relay

O2C05-MDW

Occupancy Sensor w/Integrated Photocell, 500SF, 120-

277V, Extended Range Lens installed

Multi-Technology Ceiling Mount Line Voltage Dual Relay

O2C10-MDW

Occupancy Sensor w/Integrated Photocell, 1000SF, 120-

277V, Extended Range Lens installed, Mid-Range included

Multi-Technology Ceiling Line Voltage Dual Relay Mount

O2C20-MDW

Occupancy Sensor w/Integrated Photocell, 2000SF, 120-

277V, Extended Range Lens installed, Mid-Range included

Sidebar Title Goes Here

O2C Dual Relay Multi Technology Occupancy Sensors

Leviton Manufacturing Co., Inc. Global Headquarters

201 N. Service Rd. Melville, NY 11747-3138 • Tech Line: 1-800-824-3005 • Fax: [phone]

Leviton Manufacturing Co., Inc. Lighting & Energy Solutions

20497 SW Teton Avenue, Tualatin, OR 97062 • Tele: 1-800-736-6682 • FAX: [phone] • Tech Line (6:00AM-4:00PM P.S.T. Mon-Fri): 1-800-959-6004

Leviton Manufacturing of Canada, Ltd.

165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9 • Telephone: [phone] • FAX: [phone]

Leviton S. de R.L. de C.V.

Lago Tana 43, Mexico DF, Mexico CP 11290 • Tel. [phone] • FAX: [phone] • www.leviton.com.mx

Visit our Website at: www.leviton.com/les

© 2013 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.

G-9149/K13-aa