Page 1
16.75"
5.00"
20.24"
20
OFFOOOFF
20
O
OFF
2020
OFF
O
20
OFF
OO
OFF
2020
OFF
O
20
O
OFF
86754
CIRCUIT BREAKERS
ON
231
OFF
COMMERCIAL DIMMER PACK
LEVITON MANUFACTURING CO.
2400 WATTS PER CHANNEL
MADE IN U.S.A.
TUALATIN, OREGON
R
C
R
INDUSTRIAL CONTROL EQUIPMENT
LISTED U.S.A. AND CANADA
2J80
2408 CD
Architectural
Commercial Dimmer Pack
2408 CD
P.O. Box 2210 • Tualatin, Oregon 97062 Phone: (503) 404-5500 • Fax: (503) 404-5594
Copyright © 2001, 2002, Leviton Mfg. Co., Inc.
These UL listed commercial dimmer packs feature input
ports for all the communication protocols you’ll need,
including NSI’s Micro-Plex, DMX512, NSI Luma-Net®and
0-10V analog. The 2408 also features epoxy encased
toroidal filters, which minimize noise and have a rise
time of 400 micro-seconds. Combine with Luma-Net
control stations or any Leviton-NSI control console for a
totally integrated lighting system.
2408 CD Commercial Dimmer Pack
Dimensional Data
– in. [cm] lbs.[kg]
2408 CD 2404 CD 2408 CR
Width 16.75 [42.54] 16.75 [42.54] 16.75 [42.54]
Depth 5.00 [12.7] 5.00 [12.7] 5.00 [12.7]
Height 20.25 [51.43] 20.25 [51.43] 20.25 [51.43]
Shipping Wt. 62.00 [28.12] 35.00 [15.87] 31.00 [14.06]
Applications
• Churches
• Schools
• Clubs
• Restaurants
Page 2
Literature # 010-MKNSI-000 G-6619C
P.O. Box 2210 • Tualatin, Oregon 97062 Phone: (503) 404-5500 • Fax: (503) 404-5594
Copyright © 1995, 2001, 2002 Leviton Mfg. Co. Inc.
Architectural
Commercial Dimmer Pack
2408 CD
............................
Description Cat. No.
2408 CD
8 Channel Dimmer FGP-24081-0
2408 CD, 240V FGP-24081-9
2404 CD
4 Channel Dimmer FGP-24041-0
2408 CR
8 Channel Relay FGP-24082-0
2408 CR, 240V FGP-24082-9
Specifications subject to change without notice
Features
• 4 or 8 individual dimmer channels
• 2400 watts per channel,
19,200 watt maximum
(8 dimmer version)
9,600 watt maximum
(4 dimmer version)
• Microprocessor controlled
• 8 fully magnetic circuit breakers
• 120/240 volt operation
• Dual SCR circuit design
• Toroidal choke filtering for each
channel
• 400 micro-second rise time
• 512 channel program capability
• Channel address select switch
• Soft start operating mode reduces
thermal shock and buffers inrush
current to extend lamp life
• Extruded aluminum passive heat
dispersion
• NSI Micro-Plex, DMX512 and
0-10 volt analog inputs
• Luma-Net
®
architectural control
system capable
• Pressure screw terminals for
hardwire inputs/outputs
• Test switch for dimmer or load
testing
• Remote operation with Luma-Net
®
control panels
• Individual channels may be
converted to non-dim relays
• Steel chassis construction, wall
mountable
• Power LED
• Channel status indicator LED
• Signal status LED
Control Input Terminals
• NSI Micro-Plex
• DMX512
• 0-10 volt analog inputs
• Luma-Net
Power Feed
• 80A 120/240 or 120/208Y VAC,
3-wire service plus ground
(single phase)
• #4 AWG THWN or equivalent copper
wire rated for at least 75°C
Mounting & Ventilation
• Minimum 36” from top to ceiling
• Minimum 12” from top to other
equipment
• Minimum 12” from side to wall
• Minimum 6” from side to other
equipment
• If multiple units installed in a small
space, ambient air temperature
should not exceed 100°F
Loading...