App Guide
My Leviton app screens and features are subject to change.
This guide contains screenshots of the My Leviton app for enrolling, integrating, and customizing your
Decora Smart® Wi-Fi® and/or Leviton Load Center with Smart Breakers. Please email DSSupport@leviton.com
with any questions.
Table of contents
Decora Smart Wi-Fi
Create a My Leviton Residence 4
Add a Decora Smart Device 5
Create a Schedule 6
Command Multiple Devices with Activities 7
Advanced Decora Smart Settings 8
New Dashboard 9
Settings for the Motion Sensing Dimmer 14
Bring Together with the Scene Controller Switch 15
Leviton Load Center
Add a Leviton Load Center 18
Smart Breaker Home Screen and Energy Chart 19
Smart Breaker Detail Screens 20
Load Center Settings and Notifications 22
Contact Us 23
Firmware Updates and Tech Support 16
2
My Leviton App Guide
DECORA SMART WI-FI
Watch the Intro Video Here
3
Create a My Leviton Residence
Download the My Leviton App to your iOS or Android device and create your account to begin the set up of your smart home.
Name your residence
1 2
Enter name of the residence
Enable location or enter your zip code
The location is required to set schedules
based on sunrise and sunset
4
Adding a Decora Smart Device
Add your Decora Smart device by selecting from the menu or scanning the product barcode on the package. Repeat and continue this process
until all installed Decora Smart Wi-Fi products have been set up. For video guidance check out the Decora Smart app setup video.
Add device and follow prompts in App
1
On the Dashboard screen, press the Plus (+)
button. Then, choose the type of device
you are setting up from the menu
2a
2b
In some instances, there may be
more than one type of device.
Choose which you are using
Or, scan the barcode on
the Decora Smart Wi-Fi
device package
5
Create a Schedule
Creating a schedule allows you to set your lights, fans and other small appliances to automatically turn on and o at specific times. You can set
up one or multiple schedules that activate one or more Decora Smart Wi-Fi devices at a time. If a schedule is turned ON, it will run automatically
until it is turned OFF.
Setting up a schedule
1 2 3 4
Set a start time
Select one or
more devices
to set on a
schedule
Set the
device to
turn on, o,
or set to a
level at the
scheduled
time
by choosing
Sunrise, Sunset
or a specific
time
Optionally, set
an end time
by choosing
Sunrise, Sunset
or a specific
time
Select the Day
or Days of the
week for the
schedule to run
Create a
name for the
schedule
Schedule
overview
where you can
turn schedule
on and o
6
Command Multiple Devices with Activities
Creating an activity allows you to set your lights, fans and other small appliances to automatically activate upon command. You can set up one
or multiple activities that include one or more Decora Smart Wi-Fi devices at a time. The activity will only run if the assigned icon is pressed or by
voice command using a voice assistant.
Setting up an activity
1 2 3 4
Select one or more
devices to set an
activity
Set the device to
turn on, o, or set
to a level when the
Activity runs
Choose the
icon that best
illustrates the
activity
7
Create a name for
the activity
Advanced Decora Smart Wi-Fi Device Settings
Advanced settings in the My Leviton App allow you to access the features of each device such as dimmer fade rates, min/max light level, bulb
types, night settings, auto-o, and more.
Customize your lighting experience
1 2 3
To access the advanced Dimmer
controls, press “Device Settings”
and then “Advanced Settings”
Choose the feature you wish to
change and follow prompts in app to
customize specific settings for each.
Note: This screen will vary based on
the device
(advanced dimmer settings shown)
8
Set Up Your Dashboard
Control your most important devices, scenes, activities, and energy information all in one place. Use the comprehensive Snapshot widget
to see your favorite insights and home controls in a single view. Edit the contents of each widget, hide an entire widget, or re-arrange the
order to your liking.
Widgets: Snapshot and Rooms
2
To edit a widget or to show/
hide other widgets, simply tap
the cog icon in the top right
corner.
Your Snapshot widget will
display “Devices On”, “Devices
O”, and Home/Away modes.
Additional options include
Active Circuit Breakers, Total
Power Usage, and Tripped
Breakers.
Use the Rooms widget to choose and arrange your favorite rooms –
include just one or all of them.
To turn an entire room on or o, use the toggle.
Click the three dots to see the status of each device in a room,
control those devices, add a new device, or capture the current
settings as a room scene.
9
Set Up Your Dashboard
Control your most important devices, scenes, activities, and energy information all in one place. Use the comprehensive Snapshot widget
to see your favorite insights and home controls in a single view. Edit the contents of each widget, hide an entire widget, or re-arrange the
order to your liking.
Widgets: Scenes and Devices
3 4
Room Scenes, if you have them set up, will be shown here. Adjust all
lights in the room by pushing the icon.
10
Devices widget lets you easily turn a device on/o. Include one or all
devices in your list.
Use the three dots to go to that device’s control screen.
Set Up Your Dashboard
Control your most important devices, scenes, activities, and energy information all in one place. Use the comprehensive Snapshot widget
to see your favorite insights and home controls in a single view. Edit the contents of each widget, hide an entire widget, or re-arrange the
order to your liking.
Widgets: Activities and Breaker Consumption
5 6
The Activities widget puts your favorite wholehome Activities front and center. Click the
icon to run the Activity and adjust devices
throughout your home.
Breaker Consumption widget shows a breakdown
of smart breaker consumption per circuit.
11
Set Up Your Dashboard
Control your most important devices, scenes, activities, and energy information all in one place. Use the comprehensive Snapshot widget
to see your favorite insights and home controls in a single view. Edit the contents of each widget, hide an entire widget, or re-arrange the
order to your liking.
Widget: Event Log
7
The Leviton Load Center Event Log shows if a breaker has tripped and
when. As well, it will log if your smart breakers are disconnected from
the Internet.
12
Advanced Motion Sensing Dimmer Settings
Motion sensor and dimming settings are easily configured through the My Leviton app including Motion Calibration, Night Preset Light
Level, Guide Light, Room Occupancy Response, Motion Snooze, Preset Light Level, Return to Last Level, Dimming Range (min dim/max bright)
and Fade Rates.
More than just dimming and motion detection
1 2 3
Motion Snooze temporarily
pauses motion detection
for a selected amount of time
Settings screen includes dimming
features and new selections
for Motion Sensor Options
and Night Settings
Simple options with in-app
descriptions help users
understand the device
capabilities
13
Advanced Motion Sensing Dimmer Settings
Motion sensor and dimming settings are easily configured through the My Leviton app including Motion Calibration, Night Preset Light
Level, Guide Light, Room Occupancy Response, Motion Snooze, Preset Light Level, Return to Last Level, Dimming Range (min dim/max bright)
and Fade Rates.
More than just dimming and motion detection
1 2
The motion calibration tool
can be used to select the right
sensitivity/coverage range for
the environment
3
New Night Settings include
a built-in Guidelight to softly
illuminate a space at night based
on motion or a secondary preset
light level when turned on at night
Room Occupancy Response –
control multiple Decora Smart
Wi-Fi devices based on the
room’s occupancy status;
easily include/exclude
14
Bring it all Together with a Scene Controller Switch
The Scene Controller Switch makes one-button control of the entire home easy to enact and configure. Use this device to turn “All O” at the end
of the night or enact fun scenes like “Movie Time” or “Game Night”.
One-touch control
1 2 3
Once enrolled, you can
customize your buttons
At any time, go in and adjust the
name of the buttons and what
they control
Use the app to order custom
engraved buttons in 6 color
options
15
Firmware Updates and Tech Support
Occasionally there may be firmware updates needed to your Decora Smart Wi-Fi devices to help make them even smarter! Can’t figure something
out? We are here to help with technical assistance information available in the app.
Updates and support
1 1
On the main screen of the app, firmware
updates will be displayed at the top if they’re
available – click that icon. Update the firmware
of individual devices one-by-one, or click
“Update All” to update all connected devices
Use the hamburger menu to access the in-app
support tool. Use the in-app tools to connect
with us for technical assistance. Or press the
Feedback button to send us a message
16
My Leviton App Guide
THE LEVITON LOAD CENTER
SMART BREAKERS
17
My Leviton App Guide
Add a Leviton Load Center
1 2
Log in to your My Leviton account. If you don’t have
one, download the My Leviton app from The App
Store or the Google Play store and follow the steps
to create an account
If you need to add a load center, select the ‘+’ sign
in the top right to ‘Add a Device’ and select Leviton
Load Center to add it to your residence. The app will
walk you through the configuration process. During
this process, you may give your circuit breakers
custom names
18
My Leviton App Guide
Home screen dashboard Energy usage
1 1
The main screen for your Load Center shows your
current expenditures at a glance. From this screen
you can access all of the various Load Center details
and settings.
See what energy sources are currently powering
your home
Monitor up to 3 alternate energy sources with CTs
Breaker consumption per circuit
Track energy consumption trends by day, weeks,
months or years.
View energy consumption history by kWh or cost
19
My Leviton App Guide
Scheduling and Controls
1 2
Create custom schedules for individual breakers
Schedule breaker activity during reduced energy
rate periods to save money
Scheduling for EV Chargers, Decora Smart lighting,
and Breakers all in one place
2nd Gen Smart Breakers can be turned
ON or OFF remotely
20
My Leviton App Guide
Settings and Notifications
3 4
The My Leviton app provides peace-of-mind with
alerts and notifications for unusual electrical
activity, including when and why a circuit trips, high
or low voltage events, if the breaker fails a self-test,
or if communication is lost
Tapping on a breaker opens a breaker details screen.
From here you can view breaker info, rename it, set
the position, edit notification settings, and more
21
My Leviton App Guide
Essential Circuits Smart Anomaly Detection
1 1
Designate Essential and Nonessential circuits in the
app, and change them at any time with no need for
re-wiring
The Whole Home Energy Monitor integrates with
Automatic Transfer Switches via contact interface
and will automatically shed Nonessential loads when
grid power fails
Users can select Smart Anomaly Detection to receive
alerts if unusual activity is identified, such as a freezer
not running, or an HVAC system running for too long
22
Visual Remote Assistant
This tool enables real-time, interactive, and visual engagement with Leviton Technical Service Representatives. Speak with a Leviton
Representative about connecting via the Virtual Remote Assistant. Learn more.
Customer support
CONNECT
Using a secure link, connect directly
with a Leviton technical sales
representative via video from
a mobile device.
SEE
Transmit live video or images of the
issue to the representative for Fast,
accurate analysis.
GUIDE
Representative walked customer
through the troubleshooting process
during seamless interaction.
Technical Support and other Inquiries:
DSSupport@leviton.com
loadcentersupport@leviton.com
23
RESOLVE
Diagnosis and troubleshooting
through visual engagement
results in faster resolution,
less downtime and an enhanced
customer experience.
SA-11040
Loading...