Page 1
PRODUCT DATA
AEC80 In-Ceiling Speakers Powered by JBL
Leviton Architectural Edition
APPLICATION
When room aesthetics are critical, the AEC65
and AEC80 In-Ceiling Speakers may be used
in surround-sound installations. The JBL lowdiraction swivel tweeter makes it easy for the
installer to optimize the sound field for a particular
room’s geometry.
®
COUNTRY OF ORIGIN
China
PHYSICAL SPECIFICATION
• AEC80 8-inch (200 mm) Two-Way In-Ceiling
Loudspeaker
• Driver Complement: 1” (25 mm) titanium-laminate
• dome tweeter; 8 in (200mm) titanium-laminate
woofer
• Frequency Response (-10dB): 32 Hz-20 kHz
• Sensitivity (2.83V/1m): 89 dB
• Power Handling: 100 Watts
• Impedance: Nominal 8 Ohms
• Physical Dimensions and Weight:
• Diameter: 10.87” (275 mm)
• Depth: 4.25” (108 mm)
• Mounting Cutout Size: 9.5” (240 mm) diameter
• Weight: 5.6 lb/2.5 kg per speaker (sold in pairs)
®
®
FEATURES
• JBL titanium-laminate drivers maintain musical
accuracy and clarity even at frequency extremes
• Straight-line Signal Path™ (SSP™) crossover
network for minimal signal distortion
• Long-excursion woofers with butyl-rubber
half-round surrounds and extended pole-piece
magnetic structures for maximum bass impact
and dynamic range
• Low-diraction, swivel-tweeter mounting system
for optimum stereo imaging
• Heavy-duty push-type input terminals for longterm connection integrity
• Integrated dog-ear mounting brackets (optional
rough-in kits available for pre-construction
installation in new homes)
• Acoustically transparent paintable baes
and grilles
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit
www.leviton.com/warranty.
ORDERING INFORMATION
DESCRIPTION CAT. NO.
Pair of 8” Two-Way In-Ceiling Loudspeakers, 100 watts, 8 ohms AEC80-000
8” Pre-Construction Speaker Kit for In-Ceiling Speaker AEPC8-KIT
AEC80 In-Ceiling Speakers Powered by JBL
Leviton Manufacturing Co., Inc. Global Headquarters
201 N. Service Rd. Melv ille, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: 1-800-832-9538
Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation.
4330 Micho ud Blvd., New Orleans, LA, 70129 Tel: 1-504-736-9810 Fax: 1-504-253-2954
Visit our Website at: www.leviton.com/emca
©2016 Leviton Manufacturing Co., In c. All rights re served. Subject to c hange without notice.
Page 2
®
AEC80 In-Ceiling Speakers Powered by JBL
PRODUCT DATA
PRE-CONSTRUCTION BRACKET KIT
Cat. Nos.: AEPC8, AEPI6, AEPI8, PCC55
INSTALLATION INSTRUCTIONS
CAUTION: NOTE THAT THIS MANUAL IS WRITTEN
WITH THE ASSUMPTION THAT THE INSTALLER
POSSESSES SKILL IN THE PROPER USE OF HAND
AND POWER TOOLS, AND IS FAMILIAR WITH THE
ENVIRONMENT BEHIND THE SURFACE OF THE
WALL OR CEILING WHERE THE SPEAKERS WILL
BE INSTALLED.
TO INSTALL:
1. Select speaker mounting location. Route
speaker cable from source to this location.
Note: We recommend the use of 16/2 (minimum)
class 3 speaker wires.
2. Attach wings to back plate of Pre-Construction
Bracket (refer to Figures 1A and 1B). Only two
wings are required for each back plate. Select
the mounting arrangement that best suites
your specific application. Note: The wings are
designed to be shortened as required.
3. Attach the Pre-Construction Bracket in the
desired location to the underside of framing
members so that after drywall installation,
the bracket and the wings are sandwiched
between the drywall and the framing member
(ensure “FRONT” is facing into the room) (refer to
Figures 1A and 1B). If the mounting area is too
congested to use both mounting wings you can
drive screws through the back plate directly into
the framing member.
4. Loop the speaker wire and attach it to the wire
management loops on the back of the bracket.
5. After drywall installation install speakers in
holes provided by drywall installer. Follow
instructions included in speaker packaging.
Leviton Manufacturing Co., Inc. Global Headquarters
201 N. Service Rd. Melv ille, NY 11747-3138 Te ch Line: 1-800-824-3005 Fax: 1-800-832-9538
Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation.
4330 Micho ud Blvd., New Orleans, LA, 70129 Tel: 1-504-736-9810 Fax: 1-504-253-2954
Visit our Website at: www.leviton.com/emca
©2016 Leviton Manufacturing Co., In c. All rights re served. Subject to c hange without notice.
SAT-10089
Loading...