Page 1
Levitating
Light Bulb
This creative bulb breakthrough core technology with Two-way
drive auto control system, the bulb can be Upward caught once
power off, it successfully solved drop problem.
Please read this manual instructions carefully, this manual gets
you started quickly enjoying your Levitating light with a great
initial experience. The manual may help you levitate your bulb
easily and successfully, the manual guide includes important
safety information and how to operate correctly to avoid the
accident happens.
Don not drop, strike, or cause any portion of the product to be
struck or shaken aggressively, Such actions may damage the
product and void your warranty.
The bulb should place on a safe surface to avoid possible smashing.
To avoid possible risk, Children under 12 years old is banned to
operating.
Don not adsorb the bulb to the top device, The magnetism of
bulb may be assimilated by the magnetic field from the top
device, this is very important for a magnetic levitation product.
Such actions may void your warranty.
Welcome to Top Levitating Light
What's in the box
Your light box includes:
Base
Adapter
Bulb
Manuel
Adapter
DC Port
Bulb
Base
Top Device
Touch Switch
Operating instructions:
1. Getting Started
Place the base on a flat surface, Connect the cable to DC pot of
the base, Plug the adapter to your outlet (100-240VAC)
2. To find balance point
You need to know that the bulb can be levitated is a balance of
interaction force, you need to find the balance point out, the
balance point located at 2cm position underneath the Top Device.
3. To levitate the bulb
Hold the bulb underneath the Top Device, Make sure the
bulb far away from the Top Device 3 inch at least, then move
to the Top Device. you will know when you have approximately
reached this point because the bulb will feel almost balanced
in mid-air – not falling down and not being pushed up.
4. Once you feel that you have reached the balance point
you can begin to gently release your hold of bulb.
If it floats – Congratulations! If it falls – simply start over.
Balance
Point
Move
up
Video Guide
www.levitatinglight.org
TIPS
The Levitating light bulb is a representative application of
magnetic levitation engineering, the techniques involved
in operation are new to most people. Practice may be needed
when learning how to properly operate this device. Do not
become discouraged if you cannot achieve levitation
after a few tries. With practice, you will become a master.
IMPORTANT!
The electromagnetic field sensor inside your Levitation
device is designed to automatically turn off power to the
unit under certain conditions such as overheating in order
to prevent damage to the circuitry and ensure long product
life. So, if after a few tries, you have not successfully levitated
the bulb please wait a minute or more before your next attempt
CAUTIONS
The bulb may drops when you release your hand if you did
not find the balance point, Make sure the bulb can be protected
when dropping. Smash void warranty.
FAQS
How does the bulb levitate?
Simple but fascinating science, the levitation is the result
of electromagnetic forces between the base and the bulb.
How does the bulb light up?
The light bulb can be powered through wireless induction
technology.
What happens if power off?
The bulb used two-way drive auto control system, the bulb
can be Upward caught once power off.
Why the base warm?
It is normal for electronics to heat up after continuous use.
The levitating light bulb uses low voltage, has been tested
and it is safe.
Loading...