Levil Technology iLevil 2 SW Instruction Manual
Wireless Integrated Avionics Module
AHRS, GPS, ADS-B 978 / 1090 MHz Receiver
Instruction Manual
iLevil
2
SW
iLevil 2 SW
ADS-B/ LED
GPS / LED
ON / OFF
SERIAL PORT
CHARGING / LED MINI USB-PORT
ADS-B ANTENNA
SOLAR PANELS
• Wireless iLevil2 SW
• 12V plug car charger with 2 USB outlets
• USB to Mini USB cable
• ADS-B Antenna
• Rubber stoppers or rubber pad
• Protective bag
• User Manual
• Charge the iLevil2 SW fully using the USB cable and dual 12V car charger supplied.
• You may use the 1amp socket for the iLevil and the 2amp socket for your tablet.
• The LED next to USB port indicates if the device is charging.
• When the LED goes off, the battery is charged. (Takes up to 4 hrs.)
• 100% charged battery supplies power for 5 hrs.
• The Solar Panel recharges the batteries when exposed to sunlight
extending battery charge during flight for aprox. 1 hr.
Package Contents
Charge before use
• Attach the supplied ADS-B antenna.
• Find a location that will allow your iLevil SW 2 to have a clear view of the sky, for
satellite reception, and “line of sight” to ADS-B ground stations and other aircraft around you.
• Align the airplane icon on the iLevil’s top label with the roll axis of your
aircraft. ON/OFF switch should face the back of the aircraft.
Solar cells facing up.
• Install iLevil on a surface that is LEVEL with the horizon DURING un-accelerated, straight and
level flight. It’s ok if it isn’t level on the ground (i.e. in tail draggers).
NOTE: An optional RAM suction cup mount is available on the website with swivel base for
ease of installation.
• You may use our free AHRS App available on the AppStore, or any other compatible App with
a horizon display to assist you with leveling the instrument
• For optimal magnetic heading, install iLevil far away from ferrous metals as possible.
(i.e. magnetic compass, cell phones, steel airframe)
• Turn on by flipping the ON/OFF switch. GPS and ADS-B LED will light.
NOTE: DO NOT rely on the iLevil for attitude & heading if it was not aligned as specified above.
Alignment
Loading...