Page 1
TPP SERIES
PFA
Teflon Temperature Sensor
Excellent Chemical Resistance
High Accuracy
Perfect for Corrosive Liquids
TPP Series c/w
LED Display (Opt)
1/2" NPT
Features
•
Completely Corrosion Resistant
•
Easy to Install
•
NPT Connection
•
PFA Teflon Probe
•
Temperature Ranges 0-100°C
•
Suitable for Sticky Liquids-Gases
•
4-20mA Output
•
Standard Probe Lengths. 4-6-8 inch
•
Accuracy ± 0.5%
Option - LED Display
•
4-20mA LED Display -Relay + 4-20mA
Output - Add Suffux (LED) to part number
NPT
1/2"
32°- 212°F 0 - 100°C
Range
SPECIFICATIONS
Type
Range
Mechanical Conn.
Electrical Conn.
Sensor
Material
Stem Lenght (L)
Protection Class
Pipe Diameter
In-Line Temperature Sensor
32 -212 F (0-100 C)-(Std)*
1/2" NPT or G Type
DIN 43650C
2-Wire Loop Powered Class B (EN 60751)
PTFE/ PFA Teflon
4"-6"-8 " (Std) Other Lengths Available
IP 65
6 mm
Dimensional
* Other Temperature Ranges
Available
1/2" NPT
Ø6
L
Page 2
TPP SERIES
PFA
Teflon Temperature Sensor
Features
•
Local display of measured value
•
Direct mounting
•
4-digit LED display
•
Easy Programminbg
•
Relay Output
•
Powered from current loop (4-20mA)
Dimensional Drawing
SPECIFICATIONS
Input signal
Voltage drop
Accuracy
Display
Ambient temperature range
Storage temperature range
Connection
Housing
Protection class
Dimension
Weight
4 ... 20 mA
< 2.5 V
0.1 % ± 1 digit
4 digit, LED, height of digit 7mm
-20 ... +70°C
-30 ... +85°C
Connector acc. to DIN 43 650
plastic ABS
IP65
42 x 46 x 49 mm
approx. 80 g
Electrical Connection
Positive pole (+ U) is connected to pin No. 1, negative pole (0 V)
is connected to pin No. 2. The plug-on display is powered by the
current loop of the 4-20 mA, no additional auxiliary power is
required.
0 V
ORDERING
Size Part Number Material
4" TPP-04 PTFE/PFA
6" TPP-06 PTFE/PFA
8" TPP-08 PTFE/PFA
* Add Suffix - 'L' for Local Display
GND
Two-wire :
1) Supply + (Red)
2) Signal + (Black)
+U
Loading...