Quick Installation Guide
( WAB-8010 )
- 2 -
marking is a certification mark that indicates conformity with health, safety, and
environmental protection standards for products sold within the European Economic Area
(EEA).The CE marking is also found on products sold outside the EEA that have been
manufactured to EEA standards. This makes the CE marking recognizable worldwide even to
people who are not familiar with the European Economic Area.
WEEE is waste electrical and electronic equipment. It is end-of-life electrical and
electronic equipment and covers virtually everything with a plug or battery. ...
The EC introduced the WEEE Directive in 2002 to address the environmental impacts of
unwanted electrical and electronic equipment at end-of-life disposal.
Digital Data Communications GmbH
Im Defdahl 10 F, 44141 Dortmund, Germany
Email : support@level1.com
- 3 -
Management
Web UI
DIP Switch to Master CPE (AP Mode)
192.168.188.253
DIP Switch to Slave CPE (Repeater Mode)
192.168.188.100
Subnet Mask
255.255.255.0
Password
admin
Content
English ..........................................................................6
Deutsch............................................................................
..8
Français .......................................................................10
Español ........................................................................12
Italiano ...........................................................................
Português ........................................................................
..14
16
- 4 -
l One Key Bridge (Config Master/ Slave CPE)
l Point to Point Connection
Press the reset button on both master and slave CPEs to start the fast bridge.
- 5 -
l Point to mult Point Connection
Press the reset button on both 1 master and mult slave CPEs to the start fast bridge.
- 6 -
English
Serial number
Name
Quantity
Note
1
Master unit
1
Required
2
RJ45 Network Cable
1
Required
3
Quick Installation Guide
1
Required
4
EU Declaration of Conformity
1
Required
5
Pole Mounting Hose Clamp (40-64mm)
1
Required
1. Package Contents
This product is provided with the following accessories in the box; please check
them carefully. If any of the accessories is missing or damaged, please contact with
your local dealer timely. (Power adapter unit is to be ordered separately)
2. Installation Guidelines
The installation environment for the wireless access point must meet the following
requirements:
l The wireless access point must avoid direct sunlight, away from heat and
sources of strong electromagnetic interference.
l The wireless access point must be placed in a cool, dry place, and there should
be enough gap for heat dissipation all around for the purpose of ventilation and
heat dissipation.
Loading...