Level One VDS-0200 User Manual
All mentioned br and names are registered trademarks a nd property of their o wners.
© 2008 All Rights Reser ved
www.level1.com
Ethernet over VDSL
Ethernet over VDSL2222 Converter
Ethernet over VDSLEthernet over VDSL
VDS-0200 (Annex A)
Why convert Ethernet to VDSL?
The LevelOne VDS-0200 converts your data from Ethernet to VDSL, making it easy
to send high-bandwidth data over long distances. This new technology uses
traditional twisted-pair telephone wiring instead of expensive Cat.5 cables.
New technology = cost-effective deployment
When using VDSL2 (Very High Speed Digital Subscriber Line) technology, users
can transmit data up to 300 meters without having to add expensive Ethernet
switches or cables to extend the network reach. And with 100Mbps downstream
and 60Mbps upstream, VDSL2technology provides ample space for all highbandwidth usage.
Fast transfer speeds? Yes. Easy Installation? Yes.
VDS-0200 works especially well in applications where traditional copper phone
lines are already installed: apartments, condominiums, hotels, university campus,
etc. There is no need to run expensive Ethernet cables and installers can easily
integrate VDSL technology into the existing network. The VDS-0200 is plug and
play ready and requires minimum installation time.
Customized settings
Each VDS-0200 also allows for customized settings for advanced use. Using a
built-in DIP switch, users can customize the behavior of the device to match the
desired network configuration.
Annex A
For networks that utilize PSTN telephone systems.
Converter
Converter Converter
H/W Ver.1.x
H/W Ver.1.x
H/W Ver.1.xH/W Ver.1.x
one world_one brand_one level_
VDS-0200 (Annex A)
Key Features
• Supports a VDSL connection up to 2km over single
pair copper wire
• Provides100Mbps downstream and 60Mbps
upstream over 300m
• Compliant with ITU-T G.993.1, G.993.2 VDSL/VDSL2 and
SG15Q4 DMT standards
• Auto MDI/MDIX for 10/100 BaseT Ethernet LAN Ports
Technical Specification
VDSL Transmission
• ITU-T G.993.1/2, SG15Q4 DMT Compliance
• Trellis Code with 1024 DMT bins
• Max Data Rate: 100/60 Mbps
• 1 * RJ-11 Port for DSL
• 1 * RJ-11 Port for Telephone
LAN Interface
• Auto-Detection for 10/100 BaseT and Half/Full
duplex
• High performance bridge for Ethernet extension
• Fully compatible with IEEE802.3/IEEE802.3u
• Automatic MDIX Function
• RJ-45 Connector x 2
• ITU-T G.993.1/2, SG15Q4 DMT Compliance
• Trellis Code with 1024 DMT bins
• Features selectable Fast and Interleaved modes
• Selectable fixed data rate and fixed SNR margin
• Features 4 Dip Switches for Configuration Settings
• Low-Latency for Video/Voice/Data applications
Physical Specifications
LEDs
Power, LAN1, LAN2 , DSL, M/S
Power Supply
DC 5V, 2A
Dimension
120mm (L) x 90mm (W) x 28mm (H)
Operating Temperature and Humidity
Operating: 0°C ~ 50°C
Humidity: 0% ~ 70% (non-condensing)
EMI Certifications
CE, FCC Class B
Digital Data Communications GmbH.
Zeche-Norm St. 25, 44319, Dortmund, Germany
Technical specif ications are subject to change without noti ce.
All mentioned br and names are registered trademarks a nd property of their o wners.
© 2008 All Rights Reser ved
www.level1.com
Ethernet over VDSL
Ethernet over VDSL2222 Converter
Ethernet over VDSLEthernet over VDSL
Converter
Converter Converter
H/W Ver.1.x
H/W Ver.1.x
H/W Ver.1.xH/W Ver.1.x
one world_one brand_one level_
Product Diagram
Order Information
VDS-0200: VDSL2 LAN Extender
Package Content
- VDS-0200 VDSL2 Converter
- 5VDC/2A Power Adaptor
- User Manual CD
- Telephone Line
Digital Data Communications GmbH.
Zeche-Norm St. 25, 44319, Dortmund, Germany
Technical specif ications are subject to change without noti ce.
Loading...