LevelOne VDS-0110 User Manual

LevelOne

User Manual

VDS-0110 / VDS-0111

Ethernet over VDSL2 Converter (Sender)

Ethernet over VDSL2 Converter (Receiver)

V1.0

2

FCC Certifications

This Equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received; including interference that may cause undesired
operation.

CE Mark Warning

This equipment complies with the requirements relating to electromagnetic compatibility,
EN 55022 Class A for ITE, the essential protection requirement of Council Directive
89/336/EEC on the approximation of the laws of the Member States relating to
electromagnetic compatibility.

Company has an on-going policy of upgrading its products and it may be possible that
information in this document is not up-to-date. Please check with your local distributors for
the latest information. No part of this document can be copied or reproduced in any form
without written consent from the company.

3

Table of Content

1. INTRODUCTIONS ................................................................................... 4

2. APPLICATION NOTES ........................................................................... 4

3. FEATURES ............................................................................................. 5

4. PACKING CONTENTS ............................................................................ 5

5. LED INDICATORS .................................................................................. 6

6. DIP SWITCHES SETTINGS .................................................................... 7

7. DATA RATES & DISTANCES .................................................................. 9

8. TECHNICAL SUPPORT ........................................................................ 10