Level One USB-0401 operation manual

USB-0401

USB Gigabit Ethernet Adapter

User Manual

Ver. 1.0.0

FCC Certifications

This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation.

CE Mark Warning

This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class B for ITE, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility.

Company has an on-going policy of upgrading its products and it may be possible that information in this document is not up-to-date. Please check with your local distributors for the latest information. No part of this document can be copied or reproduced in any form without written consent from the company.

Trademarks:

ll trade names and trademarks are the properties of their respective companies.

Table of Contents

1. UNPACKING INFORMATION......................................... 3

2. OVERVIEW..................................................................... 3

2.1 INTRODUCTION....................................................... 3

2.2 KEY FEATURES....................................................... 4

2.3 LED DEFINITION...................................................... 4

2.3.1 10/100/1000M.................................................... 4

2.3.2 Link/Act ............................................................. 4

2.3.3 USB Link............................................................ 4

3. INSTALLATION ............................................................. 5

3.1 SYSTEM REQUIREMENTS .................................... 5

3.2 HARDWARE INSTALLATION.................................. 5

3.2.1 Connect the adapter to your PC ....................... 6

3.2.2 Networking cable installation............................. 6

3.3 SOFTWARE INSTALLATION .................................. 7

3.3.1 Windows 2000 Setup......................................... 7

3.3.2 Windows XP Setup ........................................... 8

3.3.3 Windows Vista/7 Setup...................................... 9

3.3.4 Mac OS Setup ................................................. 12

4. PRODUCT SPECIFICATIONS ...................................... 15

1. Unpacking Information

Thank you for purchasing the USB-0401. Before you start, please verify that your package contains the following items:

1. One USB-0401 .

2. One driver & manual CD

3. QIG

2. Overview

2.1 Introduction

The USB-0401 provides users to launch Internet via the USB interface up to 1000 Mbps transferring and receiving rate.

The device is compatible to USB 2.0, 1.1, and 1.0. Along with complying 802.3, 802.3u and 802.3x standards, users are allowed to get connection to network in any environment that encountered. What’s more, you would not have to endure the effort opening PC cases anymore.

To laptop users, it would be even more profitable with the low power consumption feature. Together with the high compatibility, laptop users are allowed to connect to network easily with lower power consumption and hence strengthen the power efficiency. Along with Plug & Play, hot inserting/swapping supported, the device makes your PC and peripherals being connected in much an easier way.

2.2 Key Features

Complies with IEEE 802.3 10BASE-T standard

‧

Complies with IEEE 802.3u 100BASE-TX standard

‧

Complies with IEEE 802.3x full duplex flow control

‧

Compliant to USB 1.0, 1.1 and 2.0 standards

‧

Powered over USB bus with low power consumption

‧

Support full/half Duplex operation

‧

Support drivers for Windows 2000/XP/Vista/7

‧

CE FCC, VCCI class B

‧

ctive LED indicators

Plug and Play Installation

Support hot inserting and swapping

Support Wake-on-LAN

2.3 LED Definition

2.3.1 10/100/1000M

Green: Off:

2.3.2 Link/Act

Green: Blinking: Off:

2.3.3 USB Link

Green: Off:

100/1000 M 10M

Valid link on this port Data transmitting/ receiving No valid link on the this port

Valid link with this adapte No valid link with this adapter

+ 11 hidden pages