Level One POR-1102 User Manual

2

2-Port
Outdoor PoE Repeater

H/W Version: 1

Extend the reach of your PoE devices

POR-1102 is the perfect accessory to increase your
Power over Ethernet network performance. As a
2-port repeater, it’s now easier to add more devices to
the network for greater deployment exibility.

Simple yet durable, no software required

As a PoE Repeater, POR-1102 receives all power from
the Power Sending Equipment (PSE), for example,
a PoE switch. This means that POR-1102 uses no
external power supply, making it the most exible
option for system integrators looking for an easy,
aordable solution to increase the distance to the
attached devices.

POR-1102

Applications

POR-1100 is the perfect solution for taking Ethernet
to areas such as roof tops, factory oors, airports, and
large warehouses.

IP65-compliant

POR-1102 is IP65-compliant meaning it is
weatherproof from snow, rain, typhoons, desert
heat, etc. This PoE Repeater is up to the challenge for
deployment in any harsh weather condition!

POI-1102 can also work together with LevelOne’s
high-power PoE injector, POI-4000. This can extend
Ethernet connectivity an additional 100 meters for
high power PD devices, such as 18 W IP Cameras or
other devices that require power greater than 15.4 W.

Key Features

- Extends Cat.5 cable installations to beyond 100
meters

- 2-Port Ethernet Power Sourcing Equipment

(PSE)

- Forwards Power over Ethernet (PoE) to remote
device

- No Power required

- Fully transparent-no restrictions to network trac

- Supports all network devices

- IP65 weatherproof design

1 2 2

Works Well With

1. RJ45 In

2. RJ45 Out

POI-4000

High-power PoE Injector

POR-0102

2-port PoE Repeater

3

PoE PD/PSE

www.level1.com

I

one world_one brand_one level_

Technical Specication

Ethernet Interface:

IEEE 802.3x, Auto-Detection for 10/100BASE-T and full/half
duplex
Automatic MDIX function
PoE Input Port: RJ-45 Connector x 1
PoE Output Port: RJ-45 Connector x 2
Port-based VLAN function for LAN ports

Power:

IEEE 802.3af-Compliant with voltage within 44~57 Volt
Maximum Power Dissipation: 2.5 Watts

Product Diagram

Non-PoE Switch POI-4000

100m

Regulations & Approvals:

FCC Rules Part 15
CE

Physical Dimension: (L x W x H)

180mm x 165mm x 95mm

Operating Environment:

Humidity: 5% to 95% non-condensing
Temperature: 0~50 °C

Ethernet Cable (RJ-45)

PoE

100m 100m

POR-1100POR-1100

PD 1 PD 2

Note: These distances are typical results when used with 18~19Ω 24 AWG Cat.5 Cable

POR-1100

FCS-5011

Installation Notes

UP UP UP

POR-1102

100m

100m 100m

PD 1 + PD 2 ≤ 16.5w

FCS-5011