Level One POR-0122 User Manual
2
2-Port Gigabit PoE
Repeater
H/W Version: 1
For system integrators looking for a professional
solution to help extend their PoE network, POR0122 is the perfect accessory to increase your Power
over Ethernet network performance. LevelOne POR0122, a 2-Port Gigabit PoE Repeater requiring neither
conguration nor electrical power, is an innovative
transmitter to pass on both data and power extend to
another 100 meters. It delivers both data and power
to two PoE network devices such as WLAN Access
Points, Network Cameras and other appliances with
fast speed to the network for greater deployment
exibility.
PoE Compliance
Our device features PoE (Power-over-Ethernet)
capability, which carries electrical power along
with data in a safe way using Ethernet cabling. Thus
providing great cost savings by eliminating the need
for additional power cables and outlets. In addition,
it enhances exibility, for instance, you can set up a
PoE wireless access point in close proximity where the
reception is better.
POR-0122
Easy Deployment
No software installation is required. Simply just plug
and play as no external power supply is needed, due
to all electrical power comes from the PSE (Power
Sending Equipment), for instance, it could be a PoE
Gigabit Ethernet Switch. Therefore the power source
is centrally managed from one location easily and
eciently.
Scalable Design
LevelOne network devices are the perfect solution to
help you extend your existing PoE network. Normal
Ethernet cable, for example the cat5e standard, runs
up to 100 meters, but with the installation of a single
PoE repeater can increase the distance up to 200
meters. Furthermore, you can triple your range or
even more by daisy-chaining multiple PoE repeaters.
1. LED Indicators
2. RJ-45 Gigabit PoE In
3. RJ-45 Gigabit PoE Out
1
Key Features
- Extends Gigabit PoE connection for another 100
meters
- Forwards Power over Ethernet (PoE) to remote
device
- Built-in 2 PoE output ports for PoE devices
- No additional power supply required
- 10/100/1000Mbps wire speed transmission and
reception
- Simple Plug and Play installation
2
3
Works Well With
GEP-0822
8-Port Gigabit PoE Plus Switch
POI-3000
Gigabit PoE Plus Injector
3
PoE PD/PSE
www.level1.com
I
one world_one brand_one level_
Technical Specication
Ethernet Interface
IEEE 802.3x, Auto-Detection for 10/100/1000BaseT and full/half
duplex
Automatic MDI/MDIX function
PoE Input Port:
RJ-45 Connector x 1
PoE Output Port: RJ-45 Connector x 2
Power Supply
Power over Ethernet
Maximum Power Dissipation: 2.5 Watts
Led Indicators
POWER: Power is ON
POE IN: Gigabit Port with PoE IN
POE OUT1: Gigabit Port with PoE OUT
POE OUT2: Gigabit Port with PoE OUT
Product Diagram
Ethernet Cable (RJ-45)
PoE
Power Consumption
2.5 Watts (Max)
Dimensions
120 × 90 × 28 mm (L x D x H)
Weight
0.35 kg
Operating Temperature
0 to 50°C
Storage Temperature
-20 to 90°C
Humidity
5 to 95% RH (non-condensing)
Certications
FCC Rules Part 15, CE
POR-0122
100m
PoE Gigabit Ethernet Switch
802.3at (30W)
10/100/1000M LAN
Order Information POR-0122: 2-Port Gigabit PoE Repeater
Package Contents POR-0122
Quick Installation Guide
100m
10/100/1000M LAN
PD 1 + PD 2<12.5W
100m
10/100/1000M LAN
PD 1
PoE IP Camera
PD 2
PoE Wi-FI AP
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.1
Loading...