Level One POR-0120 User Manual

2

Gigabit PoE Repeater

H/W Version: 1

POR-0120

For system integrators looking for a professional
solution to help extend their PoE network, POR­0120 is the perfect accessory to increase your Power
over Ethernet network performance. LevelOne POR­0120, a 1-Port Gigabit PoE Repeater requiring neither
conguration nor electrical power, is an innovative
transmitter to pass on both data and power extend
to another100 meters. The delivery though one PoE
port and one non-PoE port are adequate to extend
network devices such as WLAN Access Points, Network
Cameras and other appliances with high-speed to the
network for greater deployment exibility

PoE Compliance

Our device features PoE (Power-over-Ethernet)
capability, which carries electrical power along
with data in a safe way using Ethernet cabling. Thus
providing great cost savings by eliminating the need
for additional power cables and outlets. In addition,
it enhances exibility, for instance, you can set up a
PoE wireless access point in close proximity where the
reception is better.

Easy Deployment

No software installation is required. Simply just plug
and play as no external power supply is needed, due
to all electrical power comes from the PSE (Power
Sending Equipment), for instance, it could be a PoE
Gigabit Ethernet Switch. Therefore the power source
is centrally managed from one location easily and
eciently.

Scalable Design

LevelOne network devices are the perfect solution to
help you extend your existing PoE network. Normal
Ethernet cable, for example the cat5e standard, runs
up to 100 meters, but with the installation of a single
PoE repeater can increase the distance up to 200
meters. Furthermore, you can triple your range or
even more by daisy-chaining multiple PoE repeaters.

1. LED Indicators

2. RJ-45 Gigabit PoE In

3. RJ-45 Gigabit Data Out

4. RJ-45 Gigabit PoE Out

1

Key Features

- Extends Gigabit PoE connection for another 100
meters

- Forwards Power over Ethernet (PoE) to remote
device

- Built-in 2 output ports for 1 PoE and 1 non-PoE
devices

- No additional power supply required

- 10/100/1000Mbps wire speed transmission and
reception

- Simple Plug and Play installation

2

3 4

Works Well With

GEP-0822

8-Port Gigabit PoE Plus Switch

POI-3000

Gigabit PoE Plus Injector

3

PoE PD/PSE

www.level1.com

I

one world_one brand_one level_

Technical Specication

Ethernet Interface

IEEE 802.3x, Auto-Detection for 10/100/1000BaseT and full/half
duplex
Automatic MDI/MDIX function
PoE Input Port: RJ-45 Connector x 1
PoE Output Port: RJ-45 Connector x 1

Power Supply

Power over Ethernet
Maximum Power Dissipation: 2.5 Watts

Led Indicators

POWER: Power is ON
POE IN: Gigabit Port with PoE IN
POE OUT1: Gigabit Port
POE OUT2: Gigabit Port with PoE OUT

Product Diagram

Ethernet Cable (RJ-45)

PoE

Power Consumption

2.5 Watts (Max)

Dimensions

120 × 90 × 28 mm (L x D x H)

Weight

0.35 kg

Operating Temperature

0 to 50°C

Storage Temperature

-20 to 90°C

Humidity

5 to 95% RH (non-condensing)

Certications

FCC Rules Part 15, CE

100m

PoE Gigabit Ethernet Switch

802.3at (30W)

10/100/1000M LAN

Order Information POR-0120: Gigabit PoE Repeater

Package Contents POR-0120

Quick Installation Guide

POR-0120

100m

10/100/1000M LAN

100m

10/100/1000M LAN

PoE Device
(17.5W max)

Non-PoE Device

All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.

© Copyright Digital Data Communications GmbH. All Rights Reserved.

V1.1