Level One POR-0102 User Manual

2-Port PoE Repeater

H/W Version: 1

POR-0102

Extend the reach of your PoE devices

For system integrators looking for a professional solution to help extend their PoE network, POR-0102 is the perfect accessory to increase your Power over Ethernet network performance. As a 2-port repeater, it’s now easier to add more devices to the network for greater deployment exibility.

Simple yet durable, no software required

As a PoE Repeater, POR-0102 receives all power from the Power Sending Equipment (PSE), for example, a PoE switch. This means that POR-0102 uses no

1 2

1. RJ-45 In

2. RJ-45 Out

external power supply, making it an ideal component for system integrators looking to increase the distance of the attached devices. With a durable metal housing and small footprint, POR-0102 ts into any tight deployment.

Applications

POR-0102 works great for large IP surveillance networks with many cameras deployed throughout a building or campus. It is also an ideal solution for outdoor wireless access points that are located far from the network control center.

Key Features

- Extends Cat.5 cable installations to beyond 100 meters

- 2-Port Ethernet Power Sourcing Equipment

(PSE)

- Forwards Power over Ethernet (PoE) to remote device

- Fully transparent-no restrictions to network trac

- No power required

- Simple to install-works instantly

Works Well With

POI-4000

High-power PoE Injector

POR-1100

Outdoor PoE Repeater

www.level1.com I one world_one brand_one level_

Technical Specication

PoE PD/PSE

Ethernet Interface:

IEEE 802.3x, Auto-Detection for 10/100BASE-T and full/half duplex Automatic MDIX function PoE Input Port: RJ-45 Connector x 1 PoE Output Port: RJ-45 Connector x 2 Port-based VLAN function for LAN ports

Power:

IEEE 802.3af-Compliant with voltage within 44~57 Volt Maximum Power Dissipation: 2.5 Watts

LED Indicators:

POWER: Power is on PoE OUT1: Data Activity of PoE out1 Port PoE IN: Data Activity of PoE in Port PoE OUT2: Data Activity of PoE Out2 Port

Product Diagram

PoE

Regulations & Approvals:

FCC Rules Part 15 CE

Physical Dimension: (L x W x H)

180mm x 165mm x 95mm

Operating Environment:

Humidity: 5% to 95% non-condensing Temperature:0~50 °C

100m

Standard PoE PSE (15.4W)

100m

POR-1100

Requires No Local Power Supply

100m

Indoor

POR-1102

POR-0102

PD 1 + PD 2 ≤ 10.9w

100m

PD 3 + PD 4 ≤ 6.5W

100m

PD 1

PD 2

PD 3

PD 4

Note: These distances are typical results when used with 18~19Ω 24 AWG Cat.5 Cable

Order Information

POR-0102: 2-Port PoE Repeater

Package Contents POR-0102 x 1, QIG x 1

All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.

V1.0