Level One PLI-4052D User Manual
PLI-4052 Version: 2
Available with UK power plugs only
500Mbps Powerline Adapter, UK Power Plug
The LevelOne PLI-4052 500Mbps Powerline Adapter allows you to build a powerful and clutter-free network
without breaking the bank. The latest HomePlug AV technology enables a data transmission via existing
electrical wiring instead of messy network cables. Simply plug PLI-4052 adapters into wall sockets without
any configuration, and a stable powerline network will be ready with incredible ease.
Key Features
Extends your home network through existing electrical wiring with data transfer speeds of up to 500Mbps
QoS control for traffic prioritization and bandwidth management
Security push button for software free configuration
Simple Plug and Play installation
Compact, lightweight design
128-bit AES encryption for network protection enhancement
-
Highlight
Optimizing Transmission Efficiency
Featuring the QoS (Quality of Service) mechanism, self-adjustment of network bandwidth for intensive and
sensitive applications are guaranteed to avoid any network bottlenecks or traffic congestion, hence, you
can enjoy having more than one application running at the same time such as streaming HD (HighDefinition) TV content, running a video conference, playing online games, making VoIP (Voice over IP) calls
and surfing the Internet.
www.level1.com Page 1 of 4
Fast and Secure Connect
Getting connected is easy by pressing and holding the security button which allows you to create or join an
existing home network within a few minutes. In addition, to ensure maximum security, 128-bit AES
(Advanced Encryption Standard) encrypted password is generated automatically for protecting your
network connections against eavesdropping.
Easy Setup
The installation is fairly simple and straightforward. With the built-in Plug and Play technology, simply plug
these adapters to your wall sockets and connect your Ethernet-ready devices such as broadband router,
game console and laptop to these adapters. You will turn your existing wall sockets into network
connections within a short amount of time.
Specifications
System Specifications
Standards & Protocols:
IEEE 802.3 10-BASE-T (Ethernet)
IEEE 802.3u 100-BASE-TX (Fast Ethernet)
IEEE1901/ HomePlug AV
Mix of TDMA and CSMA/CA channel access scheme; CO device generates a periodic beacon carrier for
channel access scheme
Port:
Connector: 1 x 10/100Mbps RJ-45 port
Cabling: 100Base-TX Cat. 5e or above UTP cable
Button/Knob:
Reset / Security Push Button
Indicator:
Powerline (PL), Traffic, Ethernet (Link and Active)
Power Input:
Power Input: 100 ~ 240V @ 50/60Hz Internal
Modulation:
Modulation Schemes: OFDM Symbol Modulation on Line synchronization 1024/256/64/16/8 - QAM, QPSK,
BPSK, ROBO Carrier Modulation
Bandwidth:
2 ~ 50 MHz
Data Rate:
500Mbps over Powerline; 10/100Mbps over Ethernet
Features
General:
Device detect/diagnostic
Security:
128-bit AES Link Encryption with Key Management
NEK Password Setup for Local and Remote Device
Performance
Operating Distance:
Powerlines - up to 300m
Ethernet LAN Port - up to 100m
Environment
Power Saving:
Saves Power by Standby Mode: < 0.5W
www.level1.com Page 2 of 4
Loading...