Page 1
PLI-4052
500Mbps Powerline Adapter
User Manual
V1. 0_20170628
Page 2
500Mbps Powerline Adapter
1
Table of Contents
Chapter 1 Introduction ................................................................................................................ 2
1.1 Features ............................................................................................................................ 2
1.2 Security Warning .............................................................................................................. 2
1.3 Package Contents ........................................................................................................... 3
1.4 Environment...................................................................................................................... 3
Chapter 2 External Component Description ......................................................................... 4
2.1 Front Panel ....................................................................................................................... 4
2.2 Physical Interface ............................................................................................................ 5
Chapter 3 Hardware Installation ............................................................................................... 6
3.1 Hardware Installation - Computer.................................................................................. 6
3.2 Hardware Installation - Internet...................................................................................... 7
Page 3
500Mbps Powerline Adapter
2
Chapter 1 Introduction
Congratulations on your purchase of this outstanding Powerline Adapter. The device is
500Mbps Powerline Adapter, it turns you existing powerline into a high speed network with
no need for wire or drilling. No configuration required, simply plug you adapters into you
power sockets and you can establish infrastructure in a flash. With a speed of up to
500Mbps, it is a great choice for an easy to build multimedia entertainment network.
1.1 Features
Data transfer rate up to 500Mbps over electrical wires, ideal for HD video streaming
No new wires or drilling required, just using existing electrical wires
Up to 300 meters range over the household power circuit for better performance
through wall or across floors
Power-Saving Mode automatically reduces power consumption by up to 85%
LED indicators for monitoring Power, PLC, Ethernet
1.2 Security Warning
Your Powerline Adapter should be placed in a safe and secure location. To ensure
proper operation, please keep the unit away from water and other damaging
elements. Please read user manual thoroughly before you install the device.
Please follow all warnings and instructions marked on the product.
Please do not try to open or repair the device yourself, it may expose you to
dangerous high voltage and other risks.
Do not place the device in a damp or humid location, i.e. a bathroom.
Do not operation this product near water.
Do not obstruct this product ventilation slots, as insufficient airflow may harm this
product.
The device should be placed in a sheltered and non-slip location within a temperature
range of 0 to +40 Celsius degree.
This product should never be placed near or over a radiator, or a heat register.
Since the 500Mbps Powerline Adapter product sends data over the Powerline, it is
recommended that you plug directly into wall socket (100V ~ 240V AC). Do not use
an extension cord between this product and the AC power source.
This product relies on the building’s electrical installation for short-circuit (over current)
protection.
For pluggable equipment, the socket-outlet shall be installed near the equipment and
shall be easily accessible.
Unplug from the wall socket before cleaning. Use a damp cloth for cleaning. Do not
use liquid cleaners or aerosol cleaners.
Page 4
500Mbps Powerline Adapter
3
1.3 Package Contents
Please make sure you have the following in the box, if anything is missing, please contact
your vendor.
500Mbps Powerline Adapter
User Manual
RJ-45 Network Cable
Warranty Card
1.4 Environment
Operating Temperature: 0℃~40℃
Storage Temperature: -10℃~70℃
Operating Humidity: 10%~90% non-condensing
Storage humidity: 5%~90% non-condensing
Page 5
500Mbps Powerline Adapter
4
LED
Color
Status
Indication
Power LED
Green
On
Power is on.
Blinking
System is in the process of password
synchronization.
Off
Power is off.
Powerline LED
Red
Blinking
The device is transferring data.
Green
On
The device is connected to a Powerline
network.
Off
The device has not found any other
compatible Powerline devices using the
same encryption key.
Ethernet LED
Green
On
The Ethernet port is connected, but there is
no data being transferred.
Blinking
The Ethernet Port is transferring data.
Off
The Ethernet port isn’t connected.
Chapter 2 External Component Description
2.1 Front Panel
The front panel provides LED’s for device status. Refer to the following table for the
meaning of each feature.
Page 6
500Mbps Powerline Adapter
5
Interface
Description
Power Plug
A Power Plug for connecting the adapter to a 100V~240V AC power
socket.
Ethernet Port
A 10/100Mbps Ethernet port for connecting the adapter to the PC or
the broadband device with a network cable.
Pair Button
Security: Pair buttons are used to secure a powerline network. To
secure your network, please follow the steps below. Firstly, plug in a
new adapter, and press its pair button for 1 second; then plug in
another adapter and press its pair button for 1 second as well. The
two buttons should be pressed within 2 minutes of each other. After
that, these two adapters will be finished connecting after a few
minutes later.
Reset: Press the button for 5 seconds, then release to return the
Powerline adapter to its factory default settings.
2.2 Physical Interface
There are three physical interfaces on this Powerline Adapter.
Page 7
500Mbps Powerline Adapter
6
Chapter 3 Hardware Installation
To ensure the optimum performance of the Powerline Adapter and significantly improve
the transmission of the network, we recommend that you comply with the following
connection rule:
Plug the Powerline Adapter directly into a wall socket but not the multiple sockets.
3.1 Hardware Installation - Computer
For those computers you wish to be networked by Powerline Adapter, each of the
computers must be properly connected with a Powerline Adapter through an Ethernet
(RJ-45) cable.
Following are the steps to properly connect the Powerline Adapter to your
computer:
1. Use the supplied Category 5 Ethernet cable to connect Powerline Adatper and your
PC’s Ethernet port.
2. Plug the Powerline Adapter to power outlet.
3. The Power LED indicator will light on after plugging.
The hardware connection mechanism is show below:
Page 8
500Mbps Powerline Adapter
7
3.2 Hardware Installation - Internet
This section describes how to connect the Powerline Adapter into your existing ADSL
broadband connection via ADSL Ethernet port.
Follow the procedures described below to connect the Powerline Adapter to your
ADSL broadband connection:
1. Connect the provided Ethernet (RJ-45) cable to the Powerline Adapter’s Ethernet
port.
2. Connect the other end of the Ethernet (RJ-45) cable to an available Ethernet port of
your ADSL broadband Router.
3. Plug the Powerline Adapter into a wall socket next to the computer.
4. Turn on your computer.
5. For the first connection, press the Powerline Adapter’s pair button for 1 second, then
plug in another adapter and press its pair button for 1 seconds as well. The two
buttons should be pressed within 2 minutes of each other. After that, these two
adapters will be finished connecting after a few minutes later.
6. Check and confirm that the Power LED, Powerline LED(Green) and Ethernet LED on
the Powerline Adapter are ON.
7. The Ethernet LED and Powerline LED(Red) indicator starts blinking when the data
communicaton proceeds on Ethernet.
The hardware connection mechanism is shown below:
Loading...