LevelOne HVE-6501T User Manual
LevelOne
User Manual
HVE-6501T/6501R
HDMI over IP PoE Transmitter/Receiver
Ver 1.0
Table of Contents
HVE-650 series HDMI over IP PoE T/R ......................................................... 3
GETTING THE BEST RESULTS ..................................................................... 4
Device Appearance Description ................................................................... 5
System Components: ................................................................................... 6
Installation: ................................................................................................ 8
Link Utility ................................................................................................ 13
How to Download Bonjoursdksetup.exe ............................................................ 17
HVE-650 series HDMI over IP PoE T/R
HVE-6501T:
Power Adapter
CD Manual/Utility
Quick Installation Guide
HVE-6501R:
Power Adapter
CD Manual/Utility
Quick Installation Guide
Product Overview
LevelOne HVE-650 series are high performance HDMI over IP PoE distribution
system. Designed with transmitting units(HVE-6501T) and receiving units
(HVE-6501R). it allows you to can simultaneously send out an HDMI to one or
more HDMI display. The HVE-650 series is designed for everything from small
domestic installations to large commercial applications. Use it for home theatres,
retail centers, transportation hubs, leisure facilities, educational facilities, corporate
environments and more.
Powerful Distribution Capabilities
Can be used to distribute Full-HD digital content from multiple sources more than
200 remote displays on a LAN by cascading managed switches, allowing the
farthest display without distance limitations(via fiber switch) from the 1080p source
devices while sustaining picture & sound quality. support Point-to-Point,
Point-to-Multipoint, and Multipoint-to-Multipoint broadcasting architecture, adding
more displays without adding LAN bandwidth loading.
Key Features
- Flexible and scalable HDMI 1080p Video Broadcasting with Gigabit Ethernet LAN
- Multicasting and broadcasting architecture, no more bandwidth loading
- Transmits an HDMI signal over one CAT5e/6/7 cable.
- HDMI 1.3b and HDCP 1.2 compliant
- Dual power input: 802.3af compliant PoE & DC5V
- Up to 16 transmitters and more than 200 receivers possible in a single system
- Built-in DIP switch to change Group ID and Utility for remotely
- RS-232 Control Pass-Thru to control HDMI display from transmitter side
Package Content
GETTING THE BEST RESULTS
Many factors influence the quality and reliability of an HDMI® signal distribution
installation. The following are the main factors to consider, and basic precautions
that will ensure the best possible performance.
1. Dedicated network.
The HVE-650/660 Series is designed to operate on a dedicated Gigabit Ethernet
network, not to be combined with other network traffic or with access to the internet.
2. Resolution tracking.
Set up the source to output the best resolution that all TVs are capable of displaying.
The HVE-650/660 Series supports 720p and 1080p. If some TVs in the network are
not capable of accepting 1080p, the higher resolution sets may not be shown to their
best advantage.
3. Source resolution and video/sound quality.
Sources, such as satellite receivers or cable boxes, can output at low resolutions or
deliver extremely compressed video material, yielding poor results. Consider the
source when planning and troubleshooting your system.
4. Display devices.
The perceived quality of the video image depends heavily upon the type and quality
of the TVs or projectors used. High quality displays should be expected to produce a
noticeably better image.
5. Distance between the transmitter and the receiver.
Long distances are possible, but premium quality Cat 5e/6 cables are necessary for
the longest runs.
6. Source and TV connection cables.
Use short, premium HDMI cables; low quality cables are often unreliable. Always
use good strain relief methods or locking cables to prevent cables from becoming
loose over time.
7. Interference from nearby electrical devices
It can have an adverse effect on signal quality. For example, older computer
monitors often emit very high electromagnetic fields that can interfere with the
performance of nearby video equipment.
Device Appearance Description
Function
LED Behavior
Description
DATA
Blinking
Blinking while data transmission
On
Ethernet link, no data transfer
Off
Ethernet no link, no data transfer
Link
On/off/blinking
Connect status for T or R
PWR
On/off/blinking
Power status
DEVICE State
LED State
Host
Client
PWR
LINK
PWR
LINK
Power on, host and client
not connect
Blinking On
Off Blinking
On
Blinking On
Off Blinking
Power on, host and client
connect
Blinking On
Off Blinking
On
Blinking On
Off Blinking
On
Press the host “PB”
button to disconnect
On
Off
On
Blinking
Press the client “PB1”
button to disconnect
On
On
On
Off
host power off
Off
Off
On
Blinking
client power off
On
On
Off
Off
Host
Engineering Mode
Blinking
Off→Blinking
N/A
N/A
Client
Engineering Mode
N/A
N/A
Blinking
Off→Blinking
LED Behavior
Function Description
Check List of LED State and action
System Components:
HVE-6501 Transmitter
Specifications:
1 GIGA LAN(802.3af PoE): UTP/STP 1000Mbps Ethernet Port
1 HDMI IN: 19-pin type A female
1 DB-F RS232 Port
Power : DC5V/1A or 802.3af PoE
GROUP ID: 4-pin DIP switch able to set up 16 groups
1 DATA LED
1 LINK LED
1 PWR LED
1 RESET Button
Size: 120 x 90 x 28 (H) mm, 0.8 kg
Plug and Play Installation
Support DVI with HDMI-to-DVI adapter cable
LAN Bandwidth: 150Mbps for 1080p
Loading...