Page 1
Appendix Specifications
Connector
Type
SC/ST
SC/ST/FC
Fiber Type
Multi Mode
Single Mode
Wavelength
850/1310nm
1310nm
Typica l
Distance
2KM
25KM
Min TX
PWR
-18.0dBm
-15.0dBm
Max TX
PWR
-10.0dBm
-7.0dBm
Sensitivity
-30.0dBm
-33.0dBm
Link
Budget
12.0dBm
17.0dBm
Connector
Type
SC/ST/FC
SC/ST/FC
Fiber Type
Single Mode
Single Mode
Wavelength
1310nm
1310nm
Typica l
Distance
40KM
60KM
Min TX
PWR
-10.0dBm
-5.0dBm
Max TX
PWR
-3.0dBm
0dBm
Sensitivity
-33.0dBm
-35.0dBm
Link
Budget
23.0dBm
30.0dBm
＊
Standard: IEEE 802.3 / EEE 802.3u
＊
Connector: 1 SC /ST FC fiber optic;
1 RJ45 jack
＊
Max. Distance: Twis ted pai r (c at5): 100m
Multi-mode fiber optic: 2KM
Single-mode fiber optic:
20/40/60/80/120KM
＊
Temperatu r e : Operation: -10 to 50℃
＊
Storage: -40 to 70℃
＊
Humidity: 10%-90%( non-condensing)
＊
Dimensions:
External Power: 94*70*26mm ( L*W*H )
Outside Power: 140*110*30mm ( L*W*H )
Fiber Optic Information:
Fiber Optic Retail:
User's Guide
Fast Ethernet Media Converter
Page 2
LED
Color
Function
FX 100
Green
Lit when 100 Base-FX operation.
FX Link
/ ACT
Green
Lit when fiber cable connection
with remote device is good. Blinks
when any FX traffic is present.
Power
Green
Lit when +5V power is available
FDX /
Col
Green
Lit when Full Duplex Mode is
enable. Blinking when collision is
present.
FX 100
Green
Lit when 100Base-TX operation.
FX Link
/ ACT
Green
Lit when TP cable connection with
remote device is good. Blinks when
any TX traffic is present.
Introduction
The 10/100Mbps Fast Ethernet converter media
tesbetween a 10/100 Base-TX segment and a 100Base-FX
segment. It is primarily designed for large, more higher
speed/bandwidth demandingworkgroups that require
expansion of the Fast Ethernet network.
Package Contents
Before start using the products, make sure that
What you have is what you ordered:
The Converter includes:
＊ Fast Ethernet Media Converter
＊ Power Adapter
＊ User’s Guide
＊ Quick Installation Guide
＊ Declaration of Conformity
Appearance Indication
LED indicators
This converter has LED indicators which can provide a real
time report. When you take a look at these indicators, you will
know what’s happening on your network.
converter and the other end of the cable to the SC connector
on the other converter or 100Base-FX device.3. Turn on the
power.
Notice:
The WDM Converter A is SC fiber connector works at 1550nm
on transferring data and at 1310nm on receiving data in one
Single Mode fiber.
The WDM Converter B is SC fiber connector, Inversely, works
at 1310nm on transferring data and at 1550 nm on receiving
data in a fiber. So the WDM Converter A and the WDM
Converter B must use as partnership together.
Features
＊
Complies with 802.3u 10/100 Base-TX and
100 Base-FX standards.
＊ Provide one SC fiber connector and one UTP
Connector.
＊ Auto-detection of half/full duplex transfer
mode for TX port.
＊ Auto-negotiation of 10/100Mbps rate and
Auto-Crossover for TX port.
＊ Provide switch configuration of half / full
duplex transfer mode for the FX port.
＊ Extend fiber distance up to 2KM for multi
-mode fiber and 20-120KM for the Single Mode
fiber.
＊ Easy-to –view LED indicators provide status
to monitor network activity easily.
Installation Procedure
1. Converter to 10/100 Base-TX Device (hub or switch)
connection.
＊
Make sure that the length of twisted pair cable
(category-5) between 10/100Base-TX device and converter is
no longer than 100 meters.
＊
Connect one end of twisted pair cable to RJ45 jack on the
converter and the other end of the cable to the RJ45 jack on
the 10/100 Base-TX device.
2. Converter to Converter or 100Base-FX Device Connection
connect one(SC)end of a fiber cable to the SC connector on
the converter end of the cable to the SC connector on the
Loading...