FEP-1601
16 FE PoE Switch
User Manual
1
Ver 1.0
1. Introductions
Thank you for purchasing the 16-Port PoE Switch.
The 16-Port PoE Switch, is a 16-port 10/100Mbps Fast Ethernet Switch with Power over Ethernet
capability. With 16 dip switches, each PoE port can be manually set for On-Off control. 16-Port
PoE Switch supports up to 15.4W/30W on each LAN port when the corresponding port DIP switch
is set ON.
The PoE Switch supports power protections as OVP (Over Voltage Protection), OCP (Over
Current Protection), OTP (Over Temperature Protection), robust short-circuit protection and surge
protection. For each port if the power is drawed more than 15W, the PoE and LED indicator will
be OFF. PoE will NOT be ON until the Ethernet Cable is pulled off.
2. Installation
2-1 Connects power cord to power outlet and power jack of PoE Switch. Switch on the power input.
2-2 Connects the PoE PD device to the any port # 1~16 via LAN cable. Switch PoE DIP on specific port.
(PoE DIP default all Off).
2-3 Connect any port# 1~16 to uplink LAN Switch as application below.
2
3. Packing Contents
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow Control
IEEE 802.3af /midspan PoE compliant
Features
MAC Address: 2K
Buffer Memory: 512K bits
Transmission Method: Store and Forward
Filtering/Forwarding Rates
100Mbps port - 148,800pps
10Mbps port - 14,880pps
Transmission Media
10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
PoE on each Port
15.4W/30W
Output PoE Pin
4, 5, 7, 8
LED Indicators
Per Port: Link/Act with 10/100M, PoE ON/OFF
Per Unit: Power
Power Input
100-240VAC, 50~60Hz
Dimensions
440 (without holder) × 118 × 38 mm (L x W x H)
Weight
2.2 kg
Operating Temperature
0 to 50℃
Humidity
10 to 90% RH (non-condensing)
Certifications
FCC Class A, CE
Inside the package you shall find:
(1) 19” 16-Port FE PoE Switch
(2) Power Cord
(3) User Manual
Please check if the packing is damaged or any component is missing. If so, please contact your
distributor.
4. Technical Specifications
5. LED Indicators
On the front panel of 16-Port PoE Switch, there are 33 LED indicators as the following;
POWER: “Green On” indicates power is on and normal.
LINK: “Green On” indicates each Ethernet LAN port is in connection.
“Fast Flashing” indicates each Ethernet LAN data activities at 100M.
“Slow Flashing” indicates each Ethernet LAN data activities at 10M.
PoE: “Green On” indicates Power over Ethernet function is enabled for each port.
“OFF” indicates the PoE is disabled, and it becomes a regular LAN port.
3
6. Dip Switch Settings vs Power over Ethernet
1 ~ 16 ports DIP ON
Per PoE Port
15.4/30WWatts Injected
Maximum PoE Power
240 Watts
Note that the dip switches can be switched ON and OFF anytime. However, it is
suggested that the dip switches be set ready before the PoE port is connected for
power management.
The device will be re-started if the overall PoE power consumption is over the
power budget. Please make less PoE ports enabled when over the power budget.
4
Loading...