LevelOne BOH-1300 Quick Installation Manual

- 1 -

BOH-1300

Outdoor Housing for Box Cameras (12VDC/24VAC)

Quick Installation Guide

C

HECK Y O U R PA C K A G E CONTENTS

The carton should contain the following items:

 BOH-1300

 Camera Bracket

 Screw Kit

If any item is missing or damaged, please contact your local reseller for replacement.

Note: This installation should be completed by a qualified installer and should conform to all

local codes and regulations.

I

NTROD U C T I O N

The BOH-1300 is made from extruded aluminum and is rated at IP-66.

There is built-in fan and heater included. The fan operates when the temperature reaches over

35℃ and stops once the temperature stabilizes at 25℃ again.

The built-in heater begins operation once the temperature is under 15℃ and stops once the

temperature is over 25℃ again.

- 2 -

I

NSTALLATION

A. Loosen the screws. B. Open the top cover for installation.

C. Close the top side and tighten the screws after installation. You may use the included

spacer to help position the camera at its ideal height.

D. Firmly fasten camera to bracket and bracket to the wall.