LevelOne BLH-1000 User Manual

LevelOne

BLH-1000

Bluetooth Headset

User’s Manual

- 1 -

- 1 -

Introduction

Introduction to Bluetooth Wireless Technology

Bluetooth is a short- range wireless communication technology. It allows wireless connections between
Bluetooth devices such as cellular phones, personal digital assistants (PDA), desktop and notebooks
computers, input-output devices (mouse, keyboards, printers), home appliances. Bluetooth refers to a
worldwide standard designed to operate in the internationally recognized ISM (Industrial Scientific and
Medical) frequency band. Within the ISM band (2.4Ghz – 2.48Ghz) Bluetooth transmissions hop
between 79 separate frequencies 1,600 times every second, and with a communication range of about
10 meters (class II).

Bluetooth Headset

The Bluetooth Headset is a Bluetooth device developed with the latest Bluetooth technology, which can
connect to other Bluetooth devices such as mobile phone, desktop or notebook computer, PDA (with
audio gateway profile supported) wirelessly within a range of 10 meters.

Box Content and Picture

- Bluetooth headset

- Travel charger 100/240V

- Carry bag

- Necklace and Hook

- Earplug sponges

- Quick Guide and User Manual

Getting St art

Charging battery

The Headset comes with an embedded rechargeable battery. For first time use, it takes about 4 hours to
fully charge the battery. Afterward, it takes about 2 hours to fully charge. With battery fully charged, the
talk time is about 3 to 4.5 hours, and the stand-by time will be about 100 hours.

1. Connect Travel Charger with AC power; the green indicator of charger will light up.

2. Connect the Charger, Nokia DC Jack Connector and Headset as pi cture sh own above, both red and
green indicators of Connector will light up.

3. When the battery is full charged, the red indicator of Connector will be off.

Turning On/Off Headset

1. To turn on the Headset, press and hold S1 button for 3 seconds. You will hear two short high tones
and the blue indicator of Headset flashes.

2. To turn off the Headset, press an d hold S1 button for 3 second s. You will hear two low tones and the
red indicator flashes quickly. Then the Headset is powered off.

3. The red indicator of Headset will flash slowly when battery low.

Paring Headset

You are required to pair the Headset with your mobile phone or other devices before using it.

Step 1: The Headset must be powered off before initiating pairing. To initiate pairing, press and hold S1

- 2 -