LevelOne AVE-9316 User Manual

CAT5 A/V Extender
AVE-9300
AVE-9301
AVE-9304
AVE-9304A
AVE-9308
AVE-9316
User Manual
1
TABLE OF CONTENTS
Introduction
Key Features
Panel Description
Installation and Operation
Specification
Order Information
Remarks
Introduction
AVE-93xx series is a broadcast system to transmit Audio and Video signals over Cat5/5e/6 cable, it
can reach the distance up to 300m and by stacking more Repeaters, the whole system can extend
A/V signals up to 900m. You can use different cable kit to broadcast VGA, Component, Composite,
or S-video from multimedia output devices. The video quality can be adjusted very easily from the
FOCUS and GAIN Control in the Receiver and Repeater. It can simplify the installation by using
single Cat5/5e/6 cable and reach a longer distance; the A/V extender is a perfect extension solution
for projector, plasma TV, LCD TV, LCD monitor, HDTV, and CRT, as well as in the area of Digital
Signage broadcasting.
Key Features
1. AVE-93xx series can send Audio and Video signals from Transmitter over Cat5/5e/6 cable, and
broadcast in Receiver. The broadcasting distance is 300 meters and by stacking more
Repeaters, it can extend A/V signals up to 900 meters.
2. Transmitting different video type of VGA, Component, Composite, and S-Video by different
cable kit
(1) PC Cable Kit: used to carry VGA Video + Audio, support all VGA format and with a
maximum capacity of 2048x1536@300m
(2) HDTV Cable Kit: used to carry Component Video + Audio, support 480i. 480p, 720i, 720p,
1080i, and 1080p video format and with a maximum distance of 300m
(3) TV Cable Kit: used to carry Composite / S-Video + Audio, Support 480i, 480p and 720i
video format and with a maximum distance of 300m
3. Remote and local monitors and speakers can broadcast simultaneously
4. Use Cat5 Enhance UTP cable (350MHz bandwidth) for better video quality
5. Receiver and Repeater build in video gain and focus control to adjust the video quality
6. Software free, pure hardware design, support Plug & Play
7. Stackable capacity to expand the A/V broadcasting
System Devices and Function:
1. One-Port Transmitter AVE-9301:
(1) Built in one set of A/V inputs
(2) Built in one set of A/V outputs to monitor the A/V signal broadcasted
2
(3) Built in one RJ-45 port for system output which can be connected by Cat5/5e/6 cable and
send signal to Receiver
(4) Take power from power adaptor
2. 4/8/16-Port Transmitter AVE-9304, AVE-9308, AVE-9316:
(1) Built in one set of A/V inputs
(2) Built in one set of A/V output to monitor the A/V signal broadcasted
(3) Built in 4/8/16 R-J45 ports for system output which can be connected by Cat5/5e/6 cable
and send signal to Receiver or Repeater
3. 4-Port Repeater AVE-9304A:
(4) Built in one Remote system input (RJ45) which can receive the A/V signal and with video
and focus control to adjust the video quality
(5) Built in one set of A/V output to monitor the A/V signal broadcasted
(6) Built in 4 RJ-45 ports for system output which can be connected by Cat5/5e/6 cable and
send signal to Receiver or Repeater
4. Receiver AVE-9300:
(1) Receive A/V signal through RJ45 port, and with video and focus control, you can adjust the
video quality, the maximum supported extended VGA resolution and distance up to
2048x1536@300m
(2) Built in one set of A/V outputs (VGA + Audio) to display the A/V signal broadcasted
3
Panel Description
1. AVE-9301 Single-Port A/V Transmitter
2. AVE-9300 Single-Port A/V Receiver
3. AVE-9304 / AVE-9308 / AVE-9316 Multi-Port A/V Transmitter
4
Loading...
+ 9 hidden pages