LevelOne 4 series Quick Installation Manual

LevelOne IP Camera

Wired/Wireless Network Camera

Quick Installation Guide

English Ελληνικά
Deutsch Svenska

Français Slovenščina

Español 한국어

Nederlands 繁體中文

Italiano 简體中文

Português Русский
Dansk

Page

1

This guide covers only the most common situations. All detail

information is described in the user manual.

Viewing System Requirements

 Windows 2000,XP and VISTA operating systems
 Browser: Internet Explorer 6.0 or above

NOTE:

All the captured images of installation mentioned in this user manual
were based on Windows VISTA operating system. For installation on
other Windows OS, e.g. Windows XP, all the procedures remain the
same.

Figure 1-1

Figure 1-2

Page

2

Figure 1-3

Figure 2-1

Figure 2-2

Multi-Language

install wizard

Page

3

Figure 2-3

Figure 2-4

Figure 2-5

Page

4

Figure 2-6

Figure 2-7

Figure 2-8

Register name on
Level1DNS service
or skip to continue.

Register name on
Level1DNS service
or skip to continue.

Page

5

Figure 2-9

Figure 2-10

Figure 3-1

Page

6

Using the Software CD to configure the camera

 Power on your PC and insert the CD-ROM
 The setup page should load automatically. If it does not, please

select your CD-ROM drive manually to open the setup page.

 Select “Install Software”->” Installation Wizard” to initiate the

installation.(Figure1-1&1-2 &1-3)

 Click “Next” to start the installation.( Figure 2-1)
 If you wish to install the software program in an alternate

location, click “Browse”, otherwise click “Install” to move on to
the next step. (Figure 2-2)

 Click “Next” to complete the software installation.(Figure 2-3)
 Run “EasyConfig Wizard”. (Figure 2-4)
 The EasyConfig Wizard will show MAC address and an IP

Address of available LevelOne Network Cameras. Highlight
the MAC address and double click to link to the selected
device.(Figure 2-5)

 The default user name of IP Camera is “admin” and password

is “admin” (Figure 2-6)

 The following screen would appear automatically. Click “Next”

and proceed. (Figure 2-7&2-8)

 Congratulations, you can use the camera through the network

to view the video.(Figure 2-9&2-10)

Installing IP CamSecure

Click ”IP CamSecure” and follow the onscreen instruction or refer to
the user’s manual to complete installation.(Figure 3-1)

English