Leuze electronic BCL 358i OM 100, 50120754 Instruction Manual

Part no.: 50120754
BCL 358i OM 100
Stationary bar code reader

Figure can vary

Contents

▪ Technical data
▪ Dimensioned drawings
▪ Electrical connection
▪ Diagrams
▪ Operation and display
▪ Accessories
▪ Notes

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

1 / 12

Technical data

Basic data

Series BCL 300i

Functions

Functions AutoReflAct

Reference code comparison
Alignment mode
LED indicator
AutoControl
Code fragment technology
AutoConfig

Characteristic parameters

MTTF 110 years

Read data

Code types, readable EAN 8/13

Code 93
UPC
Codabar
Code 128
2/5 Interleaved
GS1 Databar Limited
GS1 Databar Expanded
GS1 Databar Omnidirectional
Code 39

Scanning rate, typical 1,000 scans/s

Bar codes per reading gate, max. number 64 Piece(s)

Optical data

Reading distance 40 ... 300 mm

Light source Laser, Red

Laser light wavelength 655 nm

Laser class 2, IEC/EN 60825-1:2007

Transmitted-signal shape Continuous

Module size 0.2 ... 0.5 mm

Reading method Oscillating-mirror scanner

Beam deflection Via rotating polygon wheel + stepping motor with mirror

Light beam exit Zero position at side at angle less than 90°

Oscillating mirror frequency 10 Hz

Max. swivel angle 20 °

Electrical data

Protective circuit Polarity reversal protection

Performance data

Supply voltage 18 ... 30 V, DC

Power consumption, max. 9 W

Inputs/outputs selectable

Current, max. 60 mA

Number of inputs/outputs selectable 2 Piece(s)

Input current, max. 8 mA

Interface

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

2 / 12

Type EtherNet IP

EtherNet IP

Function Process

Address assignment Manual address assignment

DHCP

Switch functionality Integrated

Transmission speed 10 Mbit/s

100 Mbit/s

Service interface

Type USB

USB

Function Configuration via software

Service

Connection

Number of connections 1 Piece(s)

Connection 1

Type of connection Plug connector

Function BUS IN

Connection to device
PWR / SW IN/OUT
Service interface
Data interface

No. of pins 32 -pin

Type Male

Mechanical data

Design Cubic

Dimension (W x H x L) 125 mm x 58 mm x 110 mm

Housing material Metal, Diecast aluminum

Lens cover material Glass

Net weight 580 g

Housing color Red

Black

Type of fastening Fastening on back

Via optional mounting device
Dovetail grooves

Operation and display

Type of display LED

Number of LEDs 2 Piece(s)

Type of configuration Via web browser

Environmental data

Ambient temperature, operation 0 ... 40 °C

Ambient temperature, storage -20 ... 70 °C

Relative humidity (non-condensing) 0 ... 90 %

Certifications

Degree of protection IP 65

Protection class III

Certifications c UL US

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

3 / 12

Test procedure for EMC in accordance with standard EN 61000-4-2, 3, -4, -6

EN 55022

Test procedure for shock in accordance with standard IEC 60068-2-27, test Ea

Test procedure for continuous shock in accordance with standard IEC 60068-2-29, test Eb

Test procedure for vibration in accordance with standard IEC 60068-2-6, test Fc

Classification

eCl@ss 8.0 27280102

eCl@ss 9.0 27280102

ETIM 5.0 EC002550

Dimensioned drawings

All dimensions in millimeters

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

4 / 12

Electrical connection

Connection 1

Type of connection Plug connector

Function BUS IN

Connection to device
PWR / SW IN/OUT
Service interface
Data interface

No. of pins 32 -pin

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

5 / 12

Connection 1

Type Male

Diagrams

Reading field curve

x Reading field distance [mm]
y Reading field width [mm]

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

6 / 12

Lateral reading field curve

Operation and display

LEDs

LED Display Meaning

1 PWR Green, flashing Device ok, initialization phase

Green, continuous light Device OK

Green, briefly off - on Reading successful

green, briefly off - briefly red - on Reading not successful

Orange, continuous light Service mode

Red, flashing Device OK, warning set

Red, continuous light Error, device error

2 NET Green, flashing Initialization

Green, continuous light Bus operation ok

Red, flashing Communication error

Red, continuous light Bus error

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

7 / 12

Accessories

Connection technology - Connection cables

Part no. Designation Article Description

50132077 KD U-M12-5A-

V1-020

Connection cable Connection 1: Connector, M12, Axial, Female, A-coded, 5 -pin

Connection 2: Open end
Shielded: No
Cable length: 2,000 mm
Sheathing material: PVC

50132079 KD U-M12-5A-

V1-050

Connection cable Connection 1: Connector, M12, Axial, Female, A-coded, 5 -pin

Connection 2: Open end
Shielded: No
Cable length: 5,000 mm
Sheathing material: PVC

50132080 KD U-M12-5A-

V1-100

Connection cable Connection 1: Connector, M12, Axial, Female, A-coded, 5 -pin

Connection 2: Open end
Shielded: No
Cable length: 10,000 mm
Sheathing material: PVC

50132432 KD U-M12-5A-

V1-300

Connection cable Connection 1: Connector, M12, Axial, Female, A-coded, 5 -pin

Connection 2: Open end
Shielded: No
Cable length: 30,000 mm
Sheathing material: PVC

50135073 KS ET-M12-4A-

P7-020

Connection cable Suitable for interface: Ethernet

Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: Open end
Shielded: Yes
Cable length: 2,000 mm
Sheathing material: PUR

50135074 KS ET-M12-4A-

P7-050

Connection cable Suitable for interface: Ethernet

Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: Open end
Shielded: Yes
Cable length: 5,000 mm
Sheathing material: PUR

50135075 KS ET-M12-4A-

P7-100

Connection cable Suitable for interface: Ethernet

Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: Open end
Shielded: Yes
Cable length: 10,000 mm
Sheathing material: PUR

50135076 KS ET-M12-4A-

P7-150

Connection cable Suitable for interface: Ethernet

Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: Open end
Shielded: Yes
Cable length: 15,000 mm
Sheathing material: PUR

50135077 KS ET-M12-4A-

P7-300

Connection cable Suitable for interface: Ethernet

Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: Open end
Shielded: Yes
Cable length: 30,000 mm
Sheathing material: PUR

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

8 / 12

Connection technology - Interconnection cables

Part no. Designation Article Description

50106901 KB

ET-10000-SSA

Interconnection
cable

Suitable for interface: Ethernet
Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: Connector, M12, Axial, Male, D-coded, 4 -pin
Shielded: Yes
Cable length: 10,000 mm
Sheathing material: PUR

50106902 KB

ET-15000-SSA

Interconnection
cable

Suitable for interface: Ethernet
Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: Connector, M12, Axial, Male, D-coded, 4 -pin
Shielded: Yes
Cable length: 15,000 mm
Sheathing material: PUR

50106899 KB ET-2000-SSA Interconnection

cable

Suitable for interface: Ethernet
Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: Connector, M12, Axial, Male, D-coded, 4 -pin
Shielded: Yes
Cable length: 2,000 mm
Sheathing material: PUR

50106905 KB

ET-30000-SSA

Interconnection
cable

Suitable for interface: Ethernet
Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: Connector, M12, Axial, Male, D-coded, 4 -pin
Shielded: Yes
Cable length: 30,000 mm
Sheathing material: PUR

50106900 KB ET-5000-SSA Interconnection

cable

Suitable for interface: Ethernet
Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: Connector, M12, Axial, Male, D-coded, 4 -pin
Shielded: Yes
Cable length: 5,000 mm
Sheathing material: PUR

50117011 KB USB A - USB

miniB

Service line Suitable for interface: USB

Connection 1: USB
Connection 2: USB
Shielded: Yes
Cable length: 1,500 mm
Sheathing material: PVC

50135080 KSS ET-M12-4A-

RJ45-A-P7-020

Interconnection
cable

Suitable for interface: Ethernet
Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: RJ45
Shielded: Yes
Cable length: 2,000 mm
Sheathing material: PUR

50135081 KSS ET-M12-4A-

RJ45-A-P7-050

Interconnection
cable

Suitable for interface: Ethernet
Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: RJ45
Shielded: Yes
Cable length: 5,000 mm
Sheathing material: PUR

50135082 KSS ET-M12-4A-

RJ45-A-P7-100

Interconnection
cable

Suitable for interface: Ethernet
Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: RJ45
Shielded: Yes
Cable length: 10,000 mm
Sheathing material: PUR

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

9 / 12

Part no. Designation Article Description

50135083 KSS ET-M12-4A-

RJ45-A-P7-150

Interconnection
cable

Suitable for interface: Ethernet
Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: RJ45
Shielded: Yes
Cable length: 15,000 mm
Sheathing material: PUR

50135084 KSS ET-M12-4A-

RJ45-A-P7-300

Interconnection
cable

Suitable for interface: Ethernet
Connection 1: Connector, M12, Axial, Male, D-coded, 4 -pin
Connection 2: RJ45
Shielded: Yes
Cable length: 30,000 mm
Sheathing material: PUR

Connection technology - Connectors

Part no. Designation Article Description

50108991 D-ET1 Connector Suitable for interface: Ethernet

Connection: RJ45

50020501 KD 095-5A Connector Connection: Connector, M12, Axial, Female, A-coded, 5 -pin

50112155 S-M12A-ET Connector Suitable for interface: Ethernet

Connection: Connector, M12, Axial, Male, D-coded, 4 -pin

Connection technology - Terminal boxes

Part no. Designation Article Description

50120796 * MK 358 Connection unit Suitable for: BCL 358i

Suitable for interface: EtherNet IP
Number of connections: 4 Piece(s)
Connection: Terminal

50120797 * MS 358 Connection unit Suitable for: BCL 358i

Suitable for interface: EtherNet IP
Number of connections: 4 Piece(s)
Connection: Connector, M12

* Necessary accessories, please order separately

Connection technology - Adapters

Part no. Designation Article Description

50109832 KDS ET-M12 /

RJ45 W-4P

Adapter Suitable for: Ethernet

Number of connections: 2 Piece(s)
Connection 1: Connector, M12, Angled, Female, D-coded, 4 -pin
Connection 2: RJ45

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

10 / 12

Mounting technology - Mounting brackets

Part no. Designation Article Description

50121433 BT 300 W Mounting device Contains: 4x M4 x 10 screw, 4x position washers, 4x lock

washers
Design of mounting device: Angle, L-shape
Mounting bracket, at system: Through-hole mounting
Mounting bracket, at device: Screw type
Type of mounting device: Adjustable
Material: Metal

Mounting technology - Rod mounts

Part no. Designation Article Description

50121434 BT 300 - 1 Mounting device Contains: 4x M4 x 10 screw, 4x position washers, 4x lock

washers
Design of mounting device: Mounting system
Mounting bracket, at system: For 12 mm rod, For 14 mm rod,
For 16 mm rod
Mounting bracket, at device: Screw type
Type of mounting device: Turning, 360°, Adjustable
Material: Metal

50027375 BT 56 Mounting device Design of mounting device: Mounting system

Mounting bracket, at system: For 16 mm rod, For 18 mm rod,
For 20 mm rod
Mounting bracket, at device: Clampable
Material: Metal
Tightening torque of the clamping jaws: 8 N·m
Functions: Static applications

50121435 BT 56 - 1 Mounting device Design of mounting device: Mounting system

Mounting bracket, at system: For 12 mm rod, For 14 mm rod,
For 16 mm rod
Mounting bracket, at device: Clampable
Material: Metal
Tightening torque of the clamping jaws: 8 N·m
Functions: Static applications

Mounting technology - Other

Part no. Designation Article Description

50111224 BT 59 Mounting bracket Mounting bracket, at system: Groove mounting

Mounting bracket, at device: Clampable
Material: Metal

50124941 BTU 0300M-W Mounting device Mounting bracket, at system: Through-hole mounting

Mounting bracket, at device: Clampable, Groove mounting
Material: Metal

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

11 / 12

Reflective tapes for standard applications

Part no. Designation Article Description

50106119 REF 4-A-100x100 Reflective tape Design: Rectangular

Reflective surface: 100 mm x 100 mm
Material: Plastic
Chemical designation of the material: PMMA
Fastening: Self-adhesive

Notes

Observe intended use!

• This product is not a safety sensor and is not intended as personnel protection.

• The product may only be put into operation by competent persons.

• Only use the product in accordance with its intended use.

WARNING! LASER RADIATION – LASER CLASS 2

Never look directly into the beam!

The device satisfies the requirements of IEC 60825-1:2007 (EN 60825-1:2007) safety regulations for a product of laser class 2 as well as
the U.S. 21 CFR 1040.10 regulations with deviations corresponding to "Laser Notice No. 50" from June 24, 2007.

• Never look directly into the laser beam or in the direction of reflected laser beams! If you look into the beam path over a longer time
period, there is a risk of injury to the retina.

• Do not point the laser beam of the device at persons!

• Interrupt the laser beam using a non-transparent, non-reflective object if the laser beam is accidentally directed towards a person.

• When mounting and aligning the device, avoid reflections of the laser beam off reflective surfaces!

• CAUTION! Use of controls or adjustments or performance of procedures other than specified herein may result in hazardous light
exposure.

• Observe the applicable statutory and local laser protection regulations.

• The device must not be tampered with and must not be changed in any way.
There are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze electronic GmbH + Co. KG.

NOTE

Affix laser information and warning signs!

Laser information and warning signs are affixed to the device. In addition, self-adhesive laser information and warning signs (stick-on labels)
are supplied in several languages.

• Affix the laser information sheet to the device in the language appropriate for the place of use. When using the device in the US, use
the stick-on label with the "Complies with 21 CFR 1040.10" note.

• Affix the laser information and warning signs near the device if no signs are attached to the device (e.g. because the device is too
small) or if the attached laser information and warning signs are concealed due to the installation position.

• Affix the laser information and warning signs so that they are legible without exposing the reader to the laser radiation of the device or
other optical radiation.

Part no.: 50120754 – BCL 358i OM 100 – Stationary bar code reader

Leuze electronic GmbH + Co. KG, In der Braike 1, D-73277 Owen [e-mail] • www.leuze.com
Phone: [phone], Telefax [phone] We reserve the right to make technical changes • eng 2017-10-04

12 / 12