RS 232
RS 485
IP 65
1) DNC = Do Not Connect
2) NC = Not Connected
3) FE = Functional Earth (connected to metal sleeve)
BCL 148 V 340 B Bar code reader
Dimensioned drawing
en 01-2016/01 50130095
30 … 310mm
Compact scanner
Focus adjustment
Reading distance up to 310mm
Integrated decoder
High-resolution optics
High scanning rate
We reserve the right to make changes • DS_BCL148V340B_en_50130095.fm
A Optical axis
B Mounting threads M4 - 4 mm deep (4 x)
C Laser beam
D Rastering max. 3mm at a distance of 200mm
E Optical beam path, approx. 15 mm wide
L Cable length approx. 0.9m
Electrical connection
/PROT
1)
DNC
RXD232
TXD232
2)
NC
2)
NC
GNDIN
GND
SWI1
RS485A
RS485B
/MA0
1)
DNC
1)
DNC
VIN
3)
FE
Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0
BCL 148 V 340 B - 01
-50
-30
-40
-20
-10
0
10
20
30
40
50
0 50 100 150 200 250 300 350
m = 200 ... 300 µm
Read distance [mm]
Reading field width [mm]
Read. curve for module m = 200 … 300μm
-50
-30
-40
-20
-10
0
10
20
30
40
50
0 50 100 150 200 250 300 350
m = 167 ... 200 µm
Read distance [mm]
Reading field width [mm]
Read. curve for module m = 167 … 200μm
-50
-30
-40
-20
-10
0
10
20
30
40
50
0 20 40 60 80 100 120 140
m = 127 µm
Read distance [mm]
Reading field width [mm]
Read. curve for module m = 127μm
BCL 148 V 340 B
Specifications
Optical data
Light source laser diode 650nm
Laser class 2 according to IEC 60825-1:2007
Laser warning notice see remark
Scanning rate 750 scans/s
Reading distance 30mm … 290mm for module width from 150μm,
Reading field height min. 60mm at reading distance from 30 mm,
Focus response time <250ms
Code specifications
Code types 2/5 Interleaved
Module width
(distance dependent)
Print quality ANSI X3, 123 or DIN EN 1635 class A, B
Pitch 10°
Electrical data
Interface type RS 232 or RS 485
Service interface RS 232 with fixed data format,
Baud rate 110 … 57,600Bd
Data formats data bits: 7, 8, 9
Protocols application specific
Ports 1 switching input
Operating voltage U
Power consumption max. 9W
2)
B
Mechanical data
Weight 615g
Dimensions (Hx WxD) 119x 71x38 mm
Fastening 4 holes M4
Housing diecast zinc
Optics cover glass
Connection type approx. 0.9m cable with 15 pin Sub-D connector
Environmental data
Ambient temperature (operation) +5°C … +40 °C
Air humidity 10 … 85% rel. humidity, non-condensing
VDE safety class III
Protection class IP 65
Certifications UL 60950-1, CSA C22.2 No.60950-1-07
1) Presetting, number of digits: 2 … 63
2) For UL applications: for use in class 2 circuits according to NEC only
30mm … 310mm for module width from 200μm,
70mm … 110mm for module width of 127μm
min. 80mm at reading distance from 50 mm
Code 39
2/5 IATA
2/5 Industrial
UPC (A, E)
EAN
Code 128, EAN 128
Pharmacode
Add-On (EAN)
Codabar
(5) 6.5 … 20mil / (127) 167 … 500μm
1)
1)
8 data bits, no parity, 1 stop bit
parity: none, even, odd
stop bits: 1, 2
1 addressing
18 … 30V DC
2)
Tables
Diagrams
Order guide
Type Description Part no.
BCL 148 V 340 B Single line scanner, RS 232 or RS 485 interface,
BCL 148 V 340 B - 01 2016/01
310mm reading distance
50131538
Remarks
Operate in accordance with
intended use!
This product is not a safety sensor
and is not intended as personnel
protection.
The product may only be put into
operation by competent persons.
Only use the product in accor-
dance with the intended use.
ATTENTION
Supplied by LPS/NEC
Class 2 only!
BCL 148 V 340 B Bar code reader
Laser safety notices
ATTENTION, LASER RADIATION – LASER CLASS 2
Never look directly into the beam!
The device satisfies the requirements of IEC 60825-1:2007 (EN 60825-1:2007) safety regulations for a product in laser class 2 as well
as the U.S. 21 CFR 1040.10 regulations with deviations corresponding to "Laser Notice No. 50" from June 24th, 2007.
Conforms to the applicable requirements of 21 CFR Subchapter J.
Never look directly into the laser beam or in the direction of reflecting laser beams!
If you look into the beam path over a longer time period, there is a risk of injury to the retina.
Do not point the laser beam of the device at persons!
Interrupt the laser beam using a non-transparent, non-reflective object if the laser beam is accidentally directed towards a person.
When mounting and aligning the device, avoid reflections of the laser beam off reflective surfaces!
CAUTION! The use of controls or adjustments or performance of procedures other than specified herein may result in hazardous
light exposure.
The glass optics cover is the only aperture through which laser radiation may be observed on this product.
Adhere to the applicable legal and local regulations regarding protection from laser beams in its latest version.
The device must not be tampered with and must not be changed in any way.
There are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze electronic GmbH + Co. KG.
If the scanner motor fails during the emission of laser radiation, the limit value of laser class 2 in accordance with IEC 60825-1
Edition 2.0 (2007) could be exceeded. The device has safeguards to prevent this occurrence.
If the emitted laser beam is at a standstill, immediately disconnect the faulty bar code reader from the voltage supply.
The BCL 148 emits scanned optical radiation at a wavelength of 650 nm (red). Looking at the device's mirror and operating at the lowest
scanning rate (500 scans/s) at a viewing distance of 100 mm results in pulses with a pulse duration of 110μs on the retina of the eye.
The total pulse peak power at the exit window is less than 1.3 mW. The average laser power is, thus, less than 1mW, corresponding to
laser class 2 in accordance with EN 60825-1, Edition 2.0 (2007) and IEC 60825-1, Edition 2.0 (2007).
Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0 BCL 148 V 340 B - 01
A Laser exit opening
B Laser warning sign
C Laser information sign with laser parameters
AVOID EXPOSURE – LASER RADIATION
IS EMITTED FROM THIS APERTURE
EXPOSITION DANGEREUSE – UN RAYONNEMENT
LASER EST ÉMIS PAR CETTE OUVERTURE
LASERSTRAHLUNG
NICHT IN DEN STRAHL BLICKEN
LASER KLASSE 2
DIN EN 60825-1:2008-05
Max. Leistung (peak):
Impulsdauer:
Wellenlänge:
RADIAZIONE LASER
NON FISSARE IL FASCIO
APARRECCHIO LASER DI CLASSE 2
EN 60825-1:2007
Potenza max. (peak):
Durata dell'impulso:
Lunghezza d'onda:
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
EN 60825-1:2007
Maximum Output (peak):
Pulse duration:
Wavelength:
RAYONNEMENT LASER
NE PAS REGARDER DANS LE FAISCEAU
APPAREIL À LASER DE CLASSE 2
EN 60825-1:2007
Puissance max. (crête):
Durée d`impulsion:
Longueur d`onde:
RADIACIÓN LÁSER
NO MIRAR FIJAMENTE AL HAZ
PRODUCTO LÁSER DE CLASE 2
EN 60825-1:2007
Potencia máx. (peak):
Duración del impulso:
Longitud de onda:
RADIAÇÃO LASER
NÃO OLHAR FIXAMENTE O FEIXE
EQUIPAMENTO LASER CLASSE 2
EN 60825-1:2007
Potência máx. (peak):
Período de pulso:
Comprimento de onda:
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
IEC 60825-1:2007
Complies with 21 CFR 1040.10
Maximum Output (peak):
Pulse duration:
Wavelength:
䉏⏘戟⺓
▎䦃展⏘㧮
伊䉏⏘ℶ❐
GB7247.1-2012
㦏⮶戢⒉᧤⽿⋋᧥
厘⑁㖐兼㢅梃
㽱栎
1,3 mW
110 μs
650 nm
1,3 mW
110 μs
650 nm
1.3 mW
110 μs
650 nm
1,3 mW
110
μ
s
650 nm
1,3 mW
110 μs
650 nm
1,3 mW
110 μs
650 nm
1.3 mW
110 μs
650 nm
1.3 mW
110 μs
650 nm
50127449-01
A
B
C
B
BCL 148 V 340 B
NOTICE
Affix laser information and warning signs!
Laser information and warning signs are affixed to the device (see
(stick-on labels) are supplied in several languages (see
).
Affix the laser information sheet with the language appropriate for the place of use to the device.
When using the device in the US, use the stick-on label with the "Complies with 21 CFR 1040.10" notice.
Affix the laser information and warning signs near the device if no signs are attached to the device (e.g. because the device is too
small) or if the attached laser information and warning signs are concealed due to the installation position.
Affix the laser information and warning signs so that they are legible without exposing the reader to the laser radiation of the device
or other optical radiation.
). In addition, self-adhesive laser information and warning signs
BCL 148 V 340 B - 01 2016/01
Loading...