Leupold GX-4 User Manual

®

4

adjust the currently displayed mode.

then immediately press and hold POWER for at least 10 seconds.

Press and release MODE once; "TGR" will be shown in the upper portion of the
display.Press and release POWER as necessary until the word “on” is shown in
the bottom of the display.
To save current settings let the rangefinder automatically power-down (20 seconds)
or simply press and hold MODE for at least 1 second.

press and hold MODE,

(with yellow Smart Key only)

(with yellow Smart Key only)

and release

The

Current Temperature and Altitude (continued)

- Pressing and releasing POWER will increase the current temperature setting by 5
degrees; press MODE to save the appropriate setting and move to the current altitude

input.

- Pressing and releasing POWER will increase the current altitude by 500 feet.

- To save current settings let the rangef inder automatically power-down (20 seconds)
or simply press and hold MODE for at least 1 second.

Club Selector Setup

- When TGR is activated, the Club Selector recommends the proper iron for the current
distance, shot angle, environmental conditions, and multiple other factors.

- TGR must be activated to obtain club recommendations.

- Specific distances obtained with your 8-iron, 6-iron, and 4-iron must be input prior
to initial use.

- To input specific distances:

- Activate TGR, input the current temperature and altitude, and select between
yards or meters as the desired output unit.

- After selecting yards or meters, press and release MODE.

- The last saved distance for an 8-iron shot will be displayed; press and release
POWER until the appropriate distance is displayed; then press MODE.

- Follow the same procedure for your 6-iron and 4-iron striking distances.

- You will be asked to input the proper temperature and altitude at which each
distance was obtained. Follow the same procedure using POWER to change the
setting and MODE to advance to the next step. Accurately entering this
information will tell your GX-4 how to properly adjust for current conditions.

- To save current settings let the rangefinder automatically power-down (20 seconds)
or simply press and hold MODE for at least 1 second.

Part #: 110588
Artwork #: 110589