Letronics WiseLift Table WLT400 User Manual

USER MANUAL

8201 Eastpoint Dr. #500

Dallas,

www.wiselift.com

© 2019 Letronics Inc. Item # WLT400

TX 75227

.

SAFETY AND PRECAUTIONS

Read and follow all instructions, warnings, and notes in this manual and all other
accompanying literature before attempting to operate this product for the first time. If there
is any information in this manual which you do not understand, or if you require additional
assistance for setup or operation, please Contact a WiseLift representative at 1-877-782-

2010. Failure to follow the instructions, warnings, and notes in this manual and those located
on your product can result in personal injury or product damage and will void the product
warranty.

NO MODIFICATIONS
Your table has been designed and engineered to provide comfort and functionality. However,

under no circumstances should you modify, add, remove, or disable any feature, part, or
function of your Lift Table. Use WiseLift parts only for all repairs and replacements.

PINCH/CRUSH POINT HAZARDS
Do not place objects or appendages in the path of moving parts. The scissor and lift

mechanisms are labeled as pinch/crush point hazards on your table. Keep the following items
and similar objects clear of any Pinch/Crush points:

• Appendages

• Children

• Pets

• Wire/Tubes (ex. oxygen tubbing)

• Loose items, including but not limited to clothing and blankets

• Electrical power cords

Storage and Operation Temperatures

• Transportation or storage: -104°F/-75°C to 158°F/70°C

• Operation: 50°F/10°C to 104°F/40°C

Purchaser agreement
By accepting delivery of this product, you promise that you will not change, alter, or modify

this product or remove or render inoperable or unsafe any guards, shields, or other safety
features of this product; fail, refuse, or neglect to install any retrofit kits from time to time
provided by WiseLift to enhance or preserve the safe use of this product.

NOTE: If you ever lose or misplace your copy of this manual, contact us and we will be glad to
send you a new one immediately. You can also go to www.wiselift.com to download our user
manual.

WiseLift

2

WHAT’S IN THE BOX

Please check that all the following items are accounted for.

• WiseLift Table - WLT400

- Base

- Column

- Table

• Cup Holder

• USB Power Hub - 3 ports

• Hardware (below)

WiseLift

3

YOUR WISELIFT TABLE

This section describes the features of your table. Carefully review the function and location of
each item described.

Your WiseLift table USB port operates on standard household current and can be plugged into
any standard 110-volt wall outlet. Use a surge protector with this table.

TABLE PLACEMENT
Your lift table should be placed near a standard electrical outlet on dry, level ground where

there is ample room to allow for proper operation. WiseLift recommends that you have the
assistance of an attendant when positioning the lift table to avoid the possibility of injury when
lifting.

Follow these steps to position the table in a safe manner:

1. Lay the 3 main parts out on the floor similar to figure 1.1

2. Follow the assembly instructions for the table.

4. Plug the power cord into a surge protector and then into an electrical outlet. Do not use
a standard extension cord!

5. Position the low voltage connection cable where it will not be pinched.

WiseLift

4

ASSEMBLY

NOTE: Complete visual walk-through of table assembly is available at
https://www.youtube.com/watch?v=NY_qzg-u_rw&t=6s

NOTE: If you discover a problem at any point during the setup and positioning of your lift table,
stop and contact a WiseLift representative at 1-877-782-2010. To avoid personal injury and/
or product damage, do not plug the unit into the electrical outlet until the problem is corrected
and do not attempt to fix electrical problems by yourself.

The WiseLift Table base has 3 position options. If you are using the wheels, for rolling the
table around, only the center position is used for maximum stability. For fixed locations with a
sofa or lift chair, the left or right positions accommodate either left or right side configurations.
This puts most of the base under the furniture for maximum support and low profile.

The WiseLift Table will be shipped to you in 3 main pieces, the table base, column and top.
It is recommended that you place these peices on the floor in the orientation shown in
Figure 1.1. To assemble the WiseLift Table, follow these instructions:

1. Stand the Base on its side (fig. 1.1)

2. If you intend on using wheels, install them in each corner of the base. Screw them in
hand tight and then finish with the provided crescent wrench.

3. Install column in desired port (center port if using wheels)(fig. 1.2)

Figure 1.1

WiseLift

5