Letrix Power TS401 Rabbit Scooter Instruction Booklet

Instruction Booklet

TS401 Rabbit Scooter

Letrix Power

Charger
Connector

Battery Charge LED

Throttle
Lever Forward

Max Speed
Dial

Horn
Button

Keyswitch

Seat Slider Flap

Brake Freewheel Release

Hi Lo Switch

Throttle
Lever Reverse

This Manual Contains Important Information on the proper
maintenance and safe operation of your Rabbit scooter.

Please read this manual thoroughly to become familiar with
all operating instructions prior to operation.

Should you have any questions concerning the safe
operation or maintenance of your scooter than please
contact your local Dealer.

Safety Instructions:

Your Scooter can ideally traverse level, hard paved surfaces as well as
grass, gravel, wet and or uneven surfaces.

Remember it is a Pedestrian scooter and you should act as a pedestrian
when riding the scooter. Use footpaths and crossings. Never ride your
scooter in the traffic. You are required to understand and obey local
regulations for the lawful use of this product in public places. Ask your local
dealer or Motor transport department for details. Maximum speed limits may
apply. Limitations may apply on where and how the scooter can be used. It is
the users responsibility to obey local laws and regulations and to operate the
scooter in a safe manner.

The user should exercise extra caution when travelling across uneven, wet,
steep or loose surfaces.

Do Not operate up or down inclines steeper than 1 in 6 gradient.
Do Not attempt to climb or drive off Kerbs and Gutters or obstacles.
Do Not make sharp turns at high speed or whilst driving on inclines.
Always ensure the scooter is switched OFF before mounting or dismounting.
Always drive straight up or down slopes or inclines. Avoid driving across slopes.
Ensure that the Scooter has been correctly assembled prior to operation.
Ensure that the Steering Tiller and seat are locked in position before operation.
Check local regulations regarding scooters before using
Very Aged or invalid persons should seek advice before using.
Persons heavier than 125kg should use extra caution on uneven terrain

Overloading. Should the scooter become overloaded a heat sensitive circuit

breaker will cut out and reset within 90 seconds. This is normal and can
occur on long steep uphill runs or similar continuous high current draw
situations. Should the circuit breaker continue to cut out during regular use
contact your dealer for service.