Page 1
Assembly Instructions
Leaders in Reception Seating
Lesro Industries, Inc.
1 Grifn Road South
Bloomeld, CT
06002
Phone
860.243.3226
Fax
860.243.5392
www.lesro.com
Parts List
Leg Frames, 2 pcs.
Tabletop
Hardware Pack
1 ¾” Hex Screws, 6 pcs.
For Brooklyn Coffee and End Tables
Tools required: 3/8” wrench or ratchet
Note: These instructions are intended for various models and congurations. Your products may
not look exactly as those shown in the diagrams.
Important: The assembly process requires that some hardware be kept loose until later in the
sequence. Follow these instructions closely to ensure correct assembly.
Recommendation: Retighten all bolts on a seasonal basis to ensure your product remains strong
and stable for many years of use.
Weight Capacity: These tables are not intended for use as seats.
1. Unpack and identify all parts. Note:
Leg frames are interchangeable - no
left or right.
2. Place tabletop upside down on
a soft, clean surface to prevent
scratching.
3. Attach leg frames to tabletop using
1 ¾” hex screws into pre-drilled
pilot holes, as shown in gure 1.
Once all screws are started, tighten
all securely using 3/8” wrench or
ratchet. Use care not to strip.
4. Your product is now assembled and
ready to use.
Fig 1
Thank you for purchasing a Lesro product.
Need assistance with assembly? Call Lesro customer service 1-800-275-7545.
© 2016 Lesro Industries, Inc. Jan 2016
Visit us online at www.lesro.com
Loading...