Lesro Mystic Steel Utility Assembly Instructions Manual

Assembly Instructions

Leaders in Reception Seating

Lesro Industries, Inc.
55 Peters Road
Bloomeld, CT
06002

Tools required: Phillips screwdriver, Allen wrench (included in hardware pack).

Note: These instructions are intended for various models and congurations. Your

product may not look exactly as shown in the diagrams.

For Steel Frame Utility Tables

Recommendation: Retighten all screws and bolts on a seasonal basis to ensure

Phone [phone]
Fax [phone]
www.lesro.com

Parts List

Tabletop
Leg Frames, 2 pcs.
Cross Tube
Shelf (optional)

your product remains strong and stable for many years of use.

Weight Capacity: These tables are not intended for use as seats.

Hardware Pack

¾” Phillips Bolts, 16 pcs.
Washers, 16 pcs.
½” Allen Bolts, 2 pcs.
Allen Wrench
¾” Screws for Optional
Shelf

1. Unpack and identify all parts. Note: Leg
frames are interchangeable – no left or
right.

Legs

angle

out

Table without Optional Shelf

Figure 1

2. Place the tabletop upside down on a
soft, clean surface to prevent scratches.

3. Attach one leg frame to tabletop using ¾”
Phillips bolts and washers into threaded
inserts, as shown in gure 1. Be sure
legs angle out. Keep bolts slightly loose
for now.

4. Connect cross tube to connecting post
on leg frame using ½” Allen bolt, as
shown in gure 2. Keep bolt slightly
loose for now.

5. Connect second leg frame to cross tube
and tabletop, as shown in gure 3.

6. Tighten all 18 bolts securely at this time.

7. Using 2 or more people, carefully ip
table to upright position. If you ordered
the optional shelf, please follow shelf
installation instructions on page 2. If you
did not order the shelf, your product is
now fully assembled and ready to use.

Connecting Post

Cross

Tube

Figure 2

Figure 3

Thank you for purchasing a Lesro product.

Need assistance with assembly? Call Lesro customer service 1-800-275-7545.

© 2011 Lesro Industries, Inc. March 2011

Visit us on-line at www.lesro.com

Assembly Instructions

Leaders in Reception Seating

Lesro Industries, Inc.
55 Peters Road
Bloomeld, CT
06002

Phone [phone]
Fax [phone]
www.lesro.com

For Steel Frame Utility Tables

Tools required: Phillips screwdriver, Allen wrench (included in hardware pack).

Note: These instructions are intended for various models and congurations. Your

product may not look exactly as shown in the diagrams.

Recommendation: Retighten all screws and bolts on a seasonal basis to ensure

your product remains strong and stable for many years of use.

Weight Capacity: These tables are not intended for use as seats.

Shelf Installation Instructions (Optional)

Table with Optional Shelf

1. Table should be fully assembled
and in the upright position before
installing optional shelf. All leg
bolts should be tightened securely
before starting.

2. Slide the shelf under the tabletop
from one end as shown in gure 4.

3. Center the shelf accurately
between leg frames.

4. Attach shelf to cross tubes using
wood screws as shown in gure 5.
Tighten all screws securely using
care not to strip.

5. Your product is now fully
assembled and ready to use.

Figure 4

Figure 5

Thank you for purchasing a Lesro product.

Need assistance with assembly? Call Lesro customer service 1-800-275-7545.

© 2011 Lesro Industries, Inc. March 2011

Visit us on-line at www.lesro.com